• 한국항공운항학회지
• /
• 제25권4호
• /
• pp.170-176
• /
• 2017

In recent years, Unmanned Aerial Vehicles (UAVs) were actively developed in various fields. In development process of UAVs, flight test is performed to ensure that minimum safety requirements and technical requirements are met. By constructing flight test infrastructure such as takeoff and landing facilities, operation procedure, and equipments, flight test can be performed effectively. In this paper, operation procedures of civil UAV's flight test are proposed. The procedures proposed are composed by two main steps: first, planning and permitting procedure of flight test. Secondly, execution and control procedure of flight test.

• 한국항공운항학회지
• /
• 제31권2호
• /
• pp.89-94
• /
• 2023

Recently, domestic small airport development plans are being promoted centering on islands, and among them, Baengnyeong Island Airport is located very close to North Korea due to its geographical characteristics. In particular, since it is located in the P-518, which is prohibited airspace, it is essential to configure the arrival/departure flight procedure route similarly to the current ship in terms of securing flight safety. Therefore, in this study, a plan for airport location and facility scale was proposed by focusing on the runway operated for the purpose of aircraft operation through consultations with the Ministry of National Defense. It was proposed to meet the standards of the Airport Facility Act as an airport dedicated to domestic flights for airside facilities such as runway length and direction, target aircraft, landing pad, apron, runway and taxiway width appropriate for the topographical characteristics of Baengnyeong Island. As a result, the flight procedure is generally established as a two-way visual flight, but the 10-way arrival/departure procedure was planned to be changed to an instrument (non-precision) according to the specificity of the region. In addition, a flight procedure was established and presented for safe and systematic operation by reflecting the changes in airport facility size (landing pad, runway end safety area, etc.) following the change in instrument flight procedure in the visual flight procedure.

• 한국항공운항학회지
• /
• 제26권4호
• /
• pp.129-141
• /
• 2018

In this paper, two different flight training devices were constructed to verify the effectiveness of a pilot training system based on a Virtual Reality Head Mount Display. VFR Flight Procedure and IFR Flight Procedure were conducted by high level pilots with Commercial Pilot Licence. Flight data and pilot's visual data for each flight procedure were extracted, compared and analyzed with two training systems. Finally, the effectiveness of the training systems based on the VR HMD was demonstrated by assessing the given mission and the flight results.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.1-7
• /
• 2018

In this paper, pilot flight training procedure of VFR (Visual Flight Rule) flight procedure was investigated through basic aviation training device (BATD) using VR HMD (Virtual Reality Head Mount Display). In order to evaluate the efficiency of the pilot training, the experimental pilot group was divided according to the similar piloting ability, then same VFR flight procedure was carried out using both the VR BATD and the conventionl BATD. The comparison of the X, Y and Z position of the aircraft from the extracted flight data was conducted. As a result, it was confirmed that the VR BATD shows better steering training efficiency tendency than the conventional BATD.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1244-1252
• /
• 2008

This paper presents the analysis results obtained by the flight test of reconfiguration flight control system for an aircraft. The reconfiguration flight control system was designed by using control allocation scheme that automatically distributes the demanded control moments determined by control law to each actual control surface. In this paper, some control allocation algorithms for reconfiguration control of general aircraft with redundant control surfaces are summarized and their performance evaluation results through nonlinear simulation and Hardware-In-the-Loop-Simulation (HILS) test are shown. Also, Unmanned Aerial Vehicle (UAV) system adopted as a platform for the flight test of reconfiguration flight controller and the implementation procedure of reconfiguration flight controller into real-time UAV system were introduced. Finally, flight test results were analyzed.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권1호
• /
• pp.57-63
• /
• 2004

UAV(Unmanned Aerial Vehicle) has become one of the most popularmilitary/commercial aerial robots in the new millennium. In spite of all theadvantages that UAVs inherently have, it is not an easv job to develop a UAVbecause it requires very systematic and complete approaches in full developmentenvelop. The ground test and evaluation phase has the utmost importance in thesense that a well-developed system can be best verified on the ground. In addition,many of the aircraft crashes in the flight tests were resulted from the incompletedevelopment procedure. In this research, a verification procedure of the wholeairbome integrated system was conducted including the flight management system.An airbome flight control computer(FCC) senses the extemal environment from thepehpheral devices and sends the control signal to the actuating system using theassigned control logic and flight test strategy. A ground test station controls themission during the test while the downlink data are transferred from the flightmanagement computer using the serial communication interface. The pilot controlbox also applies additional manual actuating commands. The whole system wastested/verified on the wind-tunnel system, which gave a good pitch controlperformance with a preUspecified flight test procedure. The ground test systemguarantees the performance of fundamental functions of airbome electronic systemfor the future flight tests.

• 품질경영학회지
• /
• 제41권3호
• /
• pp.433-441
• /
• 2013

Purpose: This study investigates software qualification procedures based on the FA-50 flight control software to satisfy high reliability and flight safety. Methods: We studied software qualification categories, standard/specification and developed country case. We proposed procedure to satisfy not only flight safety but also international standard. Results: The proposed software qualification procedure satisfied flight safety and airworthiness based on the testing result of the FA-50 flight control software. Conclusion: This paper showed an appropriate qualification procedures of the flight control software in domestic circumstance through the FA-50 flight control software qualification.

• 항공우주기술
• /
• 제13권2호
• /
• pp.185-193
• /
• 2014

본 논문에서는 계기비행절차 설계 프로그램 개발 과정을 개괄적으로 살펴보고자 한다. 제품의 시장 경쟁력 강화를 위하여 외산 제품에 대하여 조사하고 분석하였다. 개발 요구조건 도출을 위하여 계기비행절차 설계 기준에 대하여 살펴보고, 소프트웨어 프로그램 개발 및 시험평가 과정에 대하여 설명하였다.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.131-138
• /
• 2004

Automatic flight control system (AFCS) for a low-cost unmanned aerial vehicle is described in this paper. Development process and block diagram of the AFCS are introduced. The flight control law for longitudinal and lateral channel autopilot is designed using optimization process. In this procedure, the performance index is composed of desired location of closed loop system poles and H$_2$norm of the resultant flight control system. This procedure is applied to the autopilot design of an unmanned target vehicle. Performance of the AFCS is evaluated by processor-in-the-loop simulation test and flight test. These results show that the AFCS has acceptable performance fur low cost UAV.

• 한국산학기술학회논문지
• /
• 제20권4호
• /
• pp.479-488
• /
• 2019

비행시험 운용절차는 유도무기 비행시험 시스템 설계 및 구현을 위한 중요 산출물의 하나로서 비행시험 진행 단계별 임무계획, 수행방법, 안전대책 등을 포함한다. 유도무기체계 개발이 첨단화, 전략화 됨에 따라서 유도무기 비행시험은 점차 복잡화, 광역화 되고 있다. 이에 따라 시험안전을 확보하기 위해서는 비행시험 운용절차의 신뢰성 증대가 요구되었다. 특히, 새로운 개념의 비행시험 수행을 위해서 시험 전 불확실성을 예측하고 대비할 수 있도록 비행시험 운용절차 설계에서 M&S 기법의 적용을 통한 검증이 필요하게 되었다. 관련 연구로서 비행시험의 최적 프레임워크 개발 연구와 비행시험 프로세스 모델기반 개선 연구들이 발표되었지만, 상위 개념의 프로세스를 중심으로 한 결과로서 하위 수준의 비행시험 자원과 연동하는 비행시험 운용절차에 직접 적용하기에는 구체성이 부족하였다. 또한, 기존의 문서기반으로 구성된 비행시험 운용절차는 시험자원의 거동과 성능에 대한 분석능력의 한계로 시험자원의 중복과 누락, 직관적이지 않는 표현으로 운용자 간의 의사소통 저하, 그리고 다수의 비행시험에 적용하기 위한 확장성 부족 등의 문제가 발생하였다. 이를 개선하기 위해 본 논문에서는 모델기반 시스템공학(MBSE) 기법의 적용을 통한 유도무기 비행시험 운용절차의 설계 방법을 제안하였다. 구체적으로 이전의 비행시험 정보를 기반으로 비행시험 진행 단계와 수행방안을 정의한 후, 요구사항으로부터 시험자원의 임무수행을 SysML 모델 기반으로 구성한 템플릿으로 제공하였다. 또한 시뮬레이션 분석을 통해서 정상상황과 비상상황에 대한 최적의 수행절차를 도출하였으며, 사례 적용을 통해서 검증하였다. 본 연구를 통해서 시험자원의 거동과 성능에 대한 분석능력의 증대로 신뢰성이 향상되었고, 다수의 비행시험에 적용할 수 있는 확장성으로 효율성이 증대되었으며, 향후 개발 예정인 유도 무기 비행시험에도 지속적으로 활용할 수 있다.