• 로봇학회논문지
• /
• 제18권3호
• /
• pp.337-345
• /
• 2023

In this paper, we propose a 3D LiDAR sensor-based costmap generation and path planning algorithm using it for reliable autonomous flight in complex indoor environments. 3D path planning is essential for reliable operation of UAVs. However, existing grid search-based or random sampling-based path planning algorithms in 3D space require a large amount of computation, and UAVs with weight constraints require reliable path planning results in real time. To solve this problem, we propose a method that divides a 3D space into several 2D spaces and a path planning algorithm that considers the distance to obstacles within each space. Among the paths generated in each space, the final path (Best path) that the UAV will follow is determined through the proposed objective function, and for this purpose, we consider the rotation angle of the 2D space, the path length, and the previous best path information. The proposed methods have been verified through autonomous flight of UAVs in real environments, and shows reliable obstacle avoidance performance in various complex environments.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1238-1243
• /
• 2008

This paper presents an HILS(Hardware in the Loop Simulations) based experimental study for the UAV's flight trajectory planning/generation algorithms and guidance/control laws. For the various mission that is loaded on each waypoint, proper trajectory planning and generation algorithms are applied to achieve best performances. Specially, the 'smoothing path' generation and the 'tangent orbit path' guidance laws are presented for the smooth path transitions and in-circle loitering mission, respectively. For the control laws that can minimize the effects of side wind, side slip angle($\beta$) feedback to the rudder scheme is implemented. Finally, being implemented on real hardwares, all the proposed algorithms are validated with integrations of hardware and software altogether via HILS.

• 한국항공우주학회지
• /
• 제42권5호
• /
• pp.376-382
• /
• 2014

본 논문에서는 원하는 경로를 따라 자동비행 중인 무인 항공기가 전진비행이 어려울 만큼 강한 맞바람을 받게 되었을 때 지나온 경로를 다시 추종하며 후진 비행하는 방법을 제시한다. 본 연구에서 후진경로추종의 목적은 바람이 다시 약해졌을 경우 단시간에 정상임무에 복귀하기 위함이다. 비선형경로추종 유도법칙에 의해 경로 상에 두 개의 Reference points가 생성된다. 후진방향을 고려하여 적절한 것을 선택하고 그 점과 항공기까지의 변위벡터 $\vec{L}$을 이용하여 경로추종에 이용한다. 또한 바람이 발생한 시점에서 바람방향에 대한 초기 기수방향이 후진경로추종 가능여부를 결정한다. Matlab으로 수행된 시뮬레이션을 통하여 운동학 모델에 근거해 본 연구에서 제시된 방법의 결과를 확인했다.

• 대한기계학회논문집A
• /
• 제36권6호
• /
• pp.653-663
• /
• 2012

본 논문에서는 높은 기동성을 목적으로, 적절한 양력과 추진력이 발생하도록 스트로크 평면의 경사각을 고려하여 경로최적화를 수행한다. 기동성비행은 추진력을 최대화하는 비행, 양력을 최대화하는 비행, 양력과 추진력을 동시에 최대화하는 비행 세 가지로 정의하고 날갯짓운동은 단순한 사인함수로 이루어진 플런징과 피칭운동으로 정의하였다. 경로최적화 과정에서 직교배열표를 이용하여 후보점을 생성하고, 그 후보점에서 2 차원 비정상 유동해석을 하였다. 유동해석 결과를 바탕으로 크리깅방법을 이용하여 근사모델을 생성하였다. 그리고 설계정식화를 정의하고 유전알고리즘을 이용하여 최적화를 수행하였다. 세 가지 목적의 날갯짓 경로의 최적화를 통해 기동성비행을 위한 날갯짓 경로를 제시하였다. 또한 날갯짓 운동으로 인해 생성되는 와류를 분석함으로써 양력과 추진력의 발생원리를 확인하였다.

• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.207-212
• /
• 2010

본 논문에서는 고정익 무인항공기의 그물망 자동착륙을 위한 나선형 강하궤적과 종말 유도기법을 설계하였다. 시야가 확보된 좁은 지역에서 착륙하도록 고정익 항공기의 나선형 강하궤적을 설계하였고, 나선형 강하의 끝점에서 그물망 입사방향을 향하도록 비행경로각 명령을 생성하였다. 종말유도 단계에서는 그물망 중심으로의 정밀한 유도를 위하여 시선각 정보 기반 의사추적 유도기법을 설계하였다. 고정익 무인항공기의 시스템 인식 모델을 이용한 6자유도 수치 시뮬레이션을 수행하여 제안한 나선형 착륙비행의 성능을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.148.3-148
• /
• 2001

This paper deals with a problem of decreasing the airspeed and the altitude of a transport aircraft using thrust only. Such a situation can occur, if the aircraft loses all hydraulic power that drives the control surfaces. A controller for flight path angle control is designed using the model following servo control method, which is a PI-type optimal regulator. For computer simulation, a simulation model that covers a range of flight envelope is made using given linear models and trim points at some flight conditions. Nondimensional aerodynamic coefficients, derivatives and trim points that are not at the given trim points are computed by linear interpolation. The model is effective in simulation where the trim point varies. Simulation using ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1386-1391
• /
• 2004

It is known that an aircraft with delta-wings which are attached to the body at a large angle like a kite or a hang glider has a measure of maneuverability and stability. Aircrafts of this kind can fly stably. Even if engine trouble occurs, it will not fall and might be able to land. In this paper, one of the conventional control methods, PID control, is applied to the aircraft with LQ local control block. This is based on an idea that the aircraft flies so stably that the automatic control system might be realized by a simple controller. The proposed PID controller consists of several sub-controllers which are constructed to each system neglecting the interference. In addition, the LQ control is involved as a local loop of the aileron and rudder control in order to increase stability of the attitude when circling. The effectiveness of the proposed method is shown through 3D computer simulations and experiments of the flight path control.

• 한국운동역학회지
• /
• 제20권3호
• /
• pp.311-318
• /
• 2010

This study examined the double piked dismount among the landing techniques of parallel bars based on three-dimensional motion analysis. Four male national gymnasts were the subjects. This study was performed to provide quantitative data highlighting players strengths and weaknesses to enable more stable landing technique. The variables analyzed were the position and velocity of center of gravity(CG) and angles of shoulder joints, hip joints, and trunk. The results are as follows: S1 secured the height of flight with fast vertical rise. After the easy spin in the air, he conducted a stable landing maintaining a proper hip joints angle. S2, S3, and S4, however, began the backward somersault already before leaving the bars, so they moved backward greatly making it more difficult to achieve a higher flight path. As a result, they couldn't control the velocity of their backward movement at landing. For a stable landing, they have to maintain the negative shoulder angle when rising, minimize both antero-posterioror side-to-side movements by doing a strong tap using hip joints, to secure the height of flight before the somersault. Results also show that at the descent, they should conduct rapid spinning by increasing their shoulder and hip joints to the maximum while controlling their velocity.

• 한국멀티미디어학회논문지
• /
• 제25권2호
• /
• pp.237-246
• /
• 2022

Among the technologies of the 4th industrial revolution, drones that have grown rapidly and are being used in various industries can be operated by the pilot directly or can be operated automatically through programming. In order to be controlled by a pilot or to operate automatically, it is essential to predict and analyze the optimal path for the drone to move without obstacles. In this paper, after securing and analyzing the pilot training dataset through the unmanned aerial vehicle piloting training platform designed through prior research, the profile of the dataset that should be preceded to search and derive the optimal route of the unmanned aerial vehicle was designed. The drone pilot training data includes the speed, movement distance, and angle of the drone, and the data set is visualized to unify the properties showing the same pattern into one and preprocess the properties showing the outliers. It is expected that the proposed big data-based profile can be used to predict and analyze the optimal movement path of an unmanned aerial vehicle.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.307-310
• /
• 1996

In this paper, we deal with some numerical analyses of a re-entry vehicle in a 2-dimensional plane as an optimal control problem. To reduce the dynamic load, the heat load and the oscillation in the trajectory, we researched the trajectories in which the load factor or the rate of flight path angle was minimized during re-entry. In addition to that, taking advantage of the monotonous subarc method and the folded time-axis method, we tried to find the heat-less and load-less trajectory with combinations of some sectional functionals so that we can achieve more comfortability.