• 제목/요약/키워드: Flight Game

검색결과 37건 처리시간 0.019초

IoT 기술이 적용된 스마트 플라잉 디스크 모니터링 시스템 구축 (Smart Flying-Disc Monitoring System with IoT Technology)

  • 이정철;장영종;황태호
    • 한국전자통신학회논문지
    • /
    • 제14권5호
    • /
    • pp.991-1000
    • /
    • 2019
  • 플라잉 디스크 게임은 1940년부터 시작된 스포츠이며, 국내는 2007년대 이후 초등학교를 중심으로 보급되어 빠른 속도로 확대되고 있다. 이와 함께 스포츠 과학화가 진행되면서, 플라잉디스크 또한 기술적 향상과 효율성을 위한 모니터링 시스템을 구축하기 위한 연구가 지속되고 있다. 본 논문은 9축 움직임 센서와 GPS 등을 이용해 이용자의 플라잉 디스크에 정보를 획득하고, 이를 블루투스 5.0을 이용한 무선 전달 방법을 제안한다. 세부적으로는 실시간 데이터를 관찰하거나 후처리 과정을 통해 회전속도, 비행 궤적, 회전 등 비교 및 분석할 수 있는 펌웨어 및 소프트웨어 그리고 HW 플랫폼을 설계 구현하였다.

북한 SLBM 위협과 대응방향 (ROKN's Response Strategy to North Korea's SLBM Threat)

  • 문창환
    • Strategy21
    • /
    • 통권40호
    • /
    • pp.82-114
    • /
    • 2016
  • The purpose of this article is to analyze the progress of North Korea's SLBM threat, and to assess the technological capacity and threat level of its SLBMs. Currently, North Korea has approximately 1000 ballistic missiles, such as the SCUD, Musudan, and Nodong, in stock. This article pays close attention to the background and strategical implication behind North Korea's obsession with developing SLBMs despite possessing sufficient means to launch provocations with its current arsenal of ground based ballistic missiles and conventional weapons. Based on the abovementioned analysis, this article will recommend possible response directions for the ROK Armed Forces to North Korea's SLBM threat. It is highly difficult to detect SLBMs due to its stealthy nature, as it is launched underwater after covert infiltration. North Korea's SLBM is considered a game changer in that even one SLBM can significantly change the strategic balance of North East Asia. North Korea's SLBM test launch in August has made a 500km flight, landing 80km inside the JADIZ (Japan Air Defense Identification Zone), and as such, it is assessed that North Korea already possesses underwater ejection and cold launch capabilities. The most realistic response to North Korea's imminent SLBM threat is bolstering anti-submarine capabilities. ROK Armed Forces need to upgrade its underwater kill-chain by modernizing and introducing new airborne anti-submarine assets and nuclear-powered submarines, among many options. Moreover, we should integrate SM-3 missiles with the Aegis Combat system that possess strong detection capabilities and flexibility, thereby establishing a sea-based Ballistic Missle Defense (BMD) system centered around the Aegis Combat System, as sea-based ballistic missile threats are best countered out in the seas. Finally, the capabilities gap that could arise as a result of budgetary concerns and timing of fielding new assets should be filled by establishing firm ROK-US-Japan combined defense posture.

멀리뛰기 8m 선수들의 운동학적 변인 조사를 통한 국내 멀리뛰기 선수들의 8m 뛰기 전략 (The Jumping Performance Strategy over 8 meters in National Long Jumpers through the Kinematic Variable Researches)

  • 류재균
    • 한국운동역학회지
    • /
    • 제15권2호
    • /
    • pp.129-138
    • /
    • 2005
  • The purpose of this study was to investigate the techniques used by long jumpers who recorded over 8meters in 2002 Busan Asian Game and 2003 Daegu Universiade. The kinematic characteristics from the last three stride to takeoff at the takeoff board were analyzed such as velocities, heights and angles. The real-life three-dimensional coordinates of 20 body landmarks during each trial were collected using a Direct Linear Transformation procedure. The conclusion were as follows; 1. The height variation who recorded over 8 meters of center of gravity of the jumpers at the last stride was under 8cm. In order to record over 8meters the national long jumpers should have under 10cm height variation. 2. In the approach phase the horizontal velocity of the jumpers should reach to 10.5m/s in last three strides and 9.79m/s in touch down at take off board. 3. The horizontal velocity at take off board must have over 8.51m/s and the vertical velocity must have 3.75m/s simultaneously in order to record 8meters. 4. The forward body lean angle should have over 20degrees with pushing the take off board in forwarding movement. The appropriate body variation range ratio between take off and touch down should be 1.2 vs 1 and the trunk angle at touch down on the board should be close to the erect posture for higher body flight.

도마 Ropez동작의 운동학적 분석 (Kinematical Analysis of Ropez Motion in Horse Vault)

  • 백진호;이순호;최규정;문영진;김동민;박종훈
    • 한국운동역학회지
    • /
    • 제15권2호
    • /
    • pp.119-127
    • /
    • 2005
  • The purpose of this research helps to make full use for perfect performance by grasping the defects of Ropez motion performed by athlete CSM who was under the training for the 28th 2004 Athene Olympic Garnes, and by presenting complementary methods. For the better Ropez motion which had been performed by CSM for the 1st dispatch selection test and the final for the 28th Athene Olympic Game was analyzed with 3-dimensional cinematographic method. Here are the conclusions: 1. During the board contact phase, powerful kicking and rapid forward flexion motion of upper body make increasing vertical velocity of C. O. G and enlarging body angle. 2. It was indicated that rapid forward flexion motion of upper body during the board contact phase get a large body angle in horse take-off. 3. rapid forward flexion motion of upper body during the board contact phase makes a longer time at horse contacting phase. It showed that this result increased velocity of horse take-off causing by powerful blocking motion. 4. Increasing of air-borne height during pre- flight phase, makes a higher C. O. G; and larger angle of hip, angle of knee and body angle in the landing phase. And it revealed that these results have a stable landing.

드론 촬영 기반 사진 스캐닝 기술을 활용한 3D 모델링데이터 생성방법에 관한 연구 (The 3D Modeling Data Production Method Using Drones Photographic Scanning Technology)

  • 이준상;이임건
    • 한국정보통신학회논문지
    • /
    • 제22권6호
    • /
    • pp.874-880
    • /
    • 2018
  • 3D 모델링은 건축, 기계, 제품 및 영화영상의 다양한 콘텐츠 제작 등에 폭넓게 활용되고 있으며 첨단 제작기술들이 적용되고 있다. 모델링은 시간이 많이 소요되는 작업으로 이러한 단점을 보완하기 위해서 최근 3D스캐닝 기술을 적용하여 제작기간을 단축시키려는 시도가 활발하다. 소형 오브젝트에 대한 3D스캐닝은 레이저나 광학을 이용하여 직접 데이터를 얻지만 대형의 건물이나 조형물은 고가의 장비가 필요하므로 직접적이 데이터 취득이 힘들다. 본 연구에서는 포토메트리를 이용하여 대형 오브젝트에 대한 3차원 모델링 데이터를 획득한다. 영상 데이터를 획득하기위해 드론을 이용하였으며 조형물과 드론의 일정한 간격유지와 비행 동선에 대한 측정방법을 제시하였다. 또한 획득된 3차원 점군 데이터를 애니메이션에 활용할 수 있는 제작환경과 렌더링 된 애니메이션 결과물을 제시하여 다양한 환경에서 제작할 수 있는 방안을 모색하였다.

플라잉 상태에서 바지형태의 하네스에 대한 하중압력 분포 측정 및 가상착의 적용 (Investigation of the body distribution of load pressure and virtual wear design of short pants harnesses in flying condition)

  • 권미연
    • 한국의상디자인학회지
    • /
    • 제23권3호
    • /
    • pp.11-21
    • /
    • 2021
  • Virtual reality is currently mainly used in games, but is starting to be applied as a variety of media fields, such as broadcasting and film. Virtual reality provides more fun than reality, and can provide new experiences in areas that cannot be experienced in reality due to the constraints of time, space, and environment. In particular, as the social non-contact arena has increased due to COVID-19, it is being applied to education, health, and medical industries. The contents are further expanding into design and military fields. Therefore, the purpose of this study was to observe the change in distribution of load and pressure felt by the body in the flying state while wearing a short pants harness, which are mainly used in the game and entertainment industry. In the experiment, the average pressure in the flying state was measured by attaching a pressure sensor to the back and front of a human mannequin. As a result, it was confirmed that the load concentrated on the waist in the flying state was 44 N, with a pressure of 1353 kPa. The pressure distribution was concentrated in front of the center of gravity, and was measured was at 98% by the pressure sensors, with an average pressure value of approximately 15 kPa, and a pressure value of approximately 12 kPa at the back, which was measured at 67% by the pressure sensor. The results of the load and pressure distribution measurement are presented as fundamental data to improve the wearability and comfort of harnesses in the future, and are compared to actual measured pressure values by analyzing the clothing pressure in flight through virtual wear of harnesses through the CLO 3D program.

평행봉 Belle 기술동작의 운동학적 분석 (A Kinematical Analysis of Belle Motion on Parallel Bars)

  • 공태웅
    • 한국운동역학회지
    • /
    • 제15권4호
    • /
    • pp.43-53
    • /
    • 2005
  • This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.