• 제목/요약/키워드: Flight Controller

검색결과 290건 처리시간 0.025초

CIFER ® 를 이용한 무인 헬리콥터의 동특성 분석 (III) - 전달함수 해석 - (Flight Dynamic Identification of a Model Helicopter Using CIFER® (III) - Transfer Function Analysis -)

  • 배영환;구영모
    • Journal of Biosystems Engineering
    • /
    • 제37권3호
    • /
    • pp.192-200
    • /
    • 2012
  • Purpose: Aerial application of chemicals with an agricultural helicopter allows for precise and timely spraying and reduces working labor and pollution. An attitude controller for an agricultural helicopter would be helpful to aerial application operator. The objectives of this paper are to determine the transfer function models and to estimate the handling qualities of a bare-airframe model helicopter. Methods: Transfer functions of a model unmanned helicopter were estimated by using NAVFIT and DERIVID modules of the $CIFER^{(R)}$ program to the time history data of frequency sweep flight tests. Control inputs of the transfer functions were elevator, aileron, rudder and collective pitch stick positions and the outputs were resulting on-axis movements of the fuselage. Results: Minimum realization of the transfer functions for pitch rate output to elevator control input and roll rate output to aileron control input produced second order transfer functions with undamped natural frequencies around 3.0 Hz and damping ratios of 0.139 and 0.530, respectively. The equivalent time delays of the transfer functions ranged from 0.16 to 0.44 second. Sensitivity analysis of the proposed parameters allowed derivation of minimal realization of the transfer functions. Conclusions: Handling quality of the model helicopter was addressed based on the eigenvalues of the transfer functions, corresponding undamped natural frequencies with damping ratios. The equivalent time delays of the lateral-directional motion ranged from 0.16 to 0.44 second, longer than the 0.1 to 0.15 second requirement for well-controlled typical manned aerial vehicles.

LiDAR 센서를 이용한 드론 자동 충돌방지 시스템 (An Automatic Collision Avoidance System for Drone using a LiDAR sensor)

  • 정의필;안우진;김연민;이정철
    • 융합신호처리학회논문지
    • /
    • 제19권2호
    • /
    • pp.54-60
    • /
    • 2018
  • 본 논문에서는 쿼드콥터 드론의 충돌방지를 위한 효율적인 자동제어 방법을 제안한다. 일반적인 드론조종 방법은 RC 조종기에서 노브의 움직임을 PWM 신호로 변환하여 전송하면 이를 드론의 무선 수신부에서 수신하여 비행제어(FC) 모듈에 전달하는 방식으로 이루어진다. 드론의 수신기와 FC 모듈 사이에 충돌 회피 모듈을 구현하여 쓰로틀, 피치 및 롤 제어 신호를 모니터링하고 변경하는 방식으로 드론 충돌을 방지한다. 충돌을 방지하기 위해 LiDAR 거리 센서와 서보 모터를 설치하여 주기적으로 비행 방향을 중심으로 -45도에서 +45도 이내의 장애물 거리를 측정한다. 충돌이 예상되면 수신된 PWM 신호를 변경하여 FC 모듈로 전송함으로써 충돌을 방지한다. 우리가 제안한 방법을 쿼드콥터 드론에 적용하여 실험을 통해 검증한 결과, 조종자 부주의 혹은 조종 미숙으로 인해 발생할 수 있는 충돌을 방지할 수 있어 안전성이 향상됨을 보였다.

체감형 배드민턴 게임을 위한 스윙 인식과 셔틀콕 궤적 계산 방법 (Methods for Swing Recognition and Shuttle Cock's Trajectory Calculation in a Tangible Badminton Game)

  • 김상철
    • 한국게임학회 논문지
    • /
    • 제14권2호
    • /
    • pp.67-76
    • /
    • 2014
  • 최근 다양한 모션 센서를 이용해서 실제 사용자의 동작을 인식하는 체감형 스포츠 게임에 대한 관심이 높다. 본 논문에서는 체감형 게임 플레이를 지원하는 배드민턴 게임의 구현에 필요한 핵심 요소 기술인 스윙 모션의 인식과 셔틀콕의 궤적 계산 방법을 제안한다. 사용자가 스마트폰을 손에 쥐고 배드민턴 스윙을 하면, 스마트폰에 내장된 가속도 센서가 발생시키는 모션신호를 다우비시 필터를 이용해서 특징벡터로 변환하고, 이를 k-NN 기반의 인식을 통해서 스윙 타입을 알아낸다. 본 논문에서 제안한 스윙 모션 인식 방법을 이용하면, 상용 모션 콘트롤러를 구입하지 않아도 체감형 배드민턴 게임을 즐길 수 있는 장점이 있다. 배드민턴 셔틀콕은 그 모양의 특징으로 인해 독특한 비행 궤적을 가지고 있기에, 단순한 힘과 속도에 관한 물리 법칙으로는 그 궤적을 표현하기 쉽지 않다. 본 논문에서 우리는 바람의 영향을 고려한 배드민턴 셔틀콕의 비행 궤적 계산 방법을 제안한다.

신경회로망 구조 최적화를 통한 비행제어시스템 설계 (Optimum Design of Neural Networks for Flight Control System)

  • 최규호;최동욱;김유단
    • 한국항공우주학회지
    • /
    • 제31권7호
    • /
    • pp.75-84
    • /
    • 2003
  • 본 논문에서는 모델링 오차나 공력계수의 불확실성이 포함되어 있는 항공기 시스템에 대해서 신경회로망을 이용한 새로운 비선형 제어시스템 설계기법을 제안하였다. 비선형 적응제어법칙을 이용하여 신경회로망의 연결가중치를 변화시켰으며, 슬라이딩 제어법칙을 이용하여 신경회로망의 추정오차를 보상하였다. 제어시스템의 성능을 결정짓는 제어 매개변수들과 신경회로망 구조를 설계하기 위한 방법을 제안하였으며, 유전자 알고리듬을 이용하여 제어 매개변수들과 신경회로망 구조를 최적화하였따. 신경회로망의 구조탐색에 적합하도록 다수의 개체군을 형성하여 개체와 군이 동시에 전화하도록 하였다. 제안된 유전자 알고리듬에 의해 최적화된 구조를 갖는 신경회로망을 이용한 제어시스템을 항공기 종운동 모델에 적용하여 성능을 검증하였다.

안정성 영역(Stability Area) 판별법을 이용한 발사체 자세제어 이득 설계 및 자세 안정성 분석 (A Study of Attitude Control and Stability Analysis Using D-Decomposition Stability Area Technique for Launch Vehicle)

  • 박용규;선병찬;노웅래;오충석
    • 한국항공우주학회지
    • /
    • 제37권6호
    • /
    • pp.537-544
    • /
    • 2009
  • 본 논문에서는 안정성 영역 판별법(stability area) 기반 발사체의 자세제어기 이득결정과정에 대한 내용을 기술하였다. 안정성 영역 판별법은 D-Decomposition 기법으로부터 정의되는 것으로 본 논문에서는 D-Decomposition 기본 이론과 이로부터 산출된 발사체의 자세 안정성 영역을 도시하고, 적용 예로써 일반적인 발사체의 1단 추력 비행구간에서 자세제어기 설계과정을 제시하였다. 제어이득 결정을 위해서 중첩된 안정성 영역을 바탕으로 시스템 파라미터 불확실성을 고려 안정성 영역 경계(stability area boundary)를 설정하고, 선정된 제어이득을 발사체 선형모델에 적용, 자세 안정성 분석 수행 결과를 나타냈다.

산업용드론 재해발생 특성과 원인분석을 통한 재해예방에 관한 연구 (A Study on Accident Prevention through Analysis of Industrial Drone Accidents and Their Causes)

  • 변형식;임종국
    • 한국안전학회지
    • /
    • 제34권6호
    • /
    • pp.88-95
    • /
    • 2019
  • It has been only a few years since drones have been introduced to Korea, and as the use of drones has increased in industrial sites as well as in hobby activities, accidents such as workers' body parts coming into contact with rotating propellers have been occurring since 2016. Industrial accident cases are being filed. In the case of a remote control vehicle, if you release the remote controller in the event of an abnormal situation, it stops in place and no further danger occurs but in case of drones flying over the sky is different. Sudden motor stops during flight, uncontrolled changes in flight posture, loss of radio waves, loose propeller, etc, numerous factors can lead to accidents due to unintentional movements. Therefore, drone operators need safety knowledge as well as high knowledge about drones. However, drones with a weight of less than 12 kg can fly without a pilot's certification, and therefore, a minimum accident prevention measure is required. 10 accidents approved as industrial accidents since 2016, 23 accidents surveyed by general drone operator, 40 accidents surveyed by the Korean Consumer Resources Unfortunately for the purpose of writing this paper, drones are a new species and do not have many parameters for analysis but my experience has shown that the type of disaster does not deviate significantly. In addition, there is no paper that analyzes drone related industrial accidents not only in Korea but also in other countries. However, even if you watch an overseas drone accident video through YouTube, it is not much different from the case that occurs in Korea. I hope that this study will be of little help to all the drone pilots as well as the work safety of industrial drones used in industrial sites.

한국항공대학교 저고도 장기체공 태양광 무인기 개발에 관한 연구 (2) - 태양광 무인기 비행제어 및 유도항법 - (A Study on the Development of Low-Altitude and Long-Endurance Solar-Powered UAV from Korea Aerospace University (2) - Flight Control and Guidance of Solar Powered UAV -)

  • 김태림;김도영;정재백;문석민;김용래;배재성;박상혁
    • 한국항공우주학회지
    • /
    • 제50권7호
    • /
    • pp.479-487
    • /
    • 2022
  • 본 논문에서는 한국항공대학교에서 연구, 개발한 태양광 무인기 KAU-SPUAV의 자동 비행을 위한 제어기 설계 및 유도기법에 관하여 기술했다. 와류격자법을 활용하여 공력계수들을 계산했고 이를 항공기의 6자유도 방정식에 적용했다. 또한 깃요소이론을 활용하여 프로펠러의 추력 및 토크계수를 계산했다. 상승풍을 맞닥뜨렸을 때 효율적으로 활공하기 위하여 추력을 사용한 고도제어기가 KAU-SPUAV에 사용되었다. 또한 태양광 무인기의 장기체공 임무를 위해 운용 중에 발생하는 바람의 영향을 고려하기 위한 바람 추정 기법을 적용하였고, 강한 맞바람에 대처하기 위한 유도기법과 자동 착륙 알고리즘을 구성하였으며 2021년 8월, 56시간 33분의 태양광 장기체공 실험을 통해 제어 및 유도기법의 성능을 검증하였다.

지형 추종을 위한 모델 예측제어와 비선형 외란 관측기를 이용한 백스테핑 슬라이딩 모드 제어기법 설계 (A Design of Model Predictive Control and Nonlinear Disturbance Observer-based Backstepping Sliding Mode Control for Terrain Following)

  • 이동우;홍경우;임철수;방효충;임동주;박대성;송기훈
    • 한국군사과학기술학회지
    • /
    • 제27권4호
    • /
    • pp.495-506
    • /
    • 2024
  • In this study, we propose the terrain following algorithm using model predictive control and nonlinear disturbance observer-based backstepping sliding mode controller for an aircraft system. Terrain following is important for military missions because it helps the aircraft avoid detection by the enemy radar. The model predictive control is used to replace the generating trajectory and guidance with the flight path angle constraint. In addition, the aircraft is affected to the parameter uncertainty and unknown disturbance such as wind near the mountainous terrain. Therefore, we suggest the nonlinear disturbance-based backstepping sliding mode control method for the aircraft that has highly nonlinearity to enhance flight path angle tracking performance. Through the numerical simulation, the proposed method showed the better tracking performance than the traditional backstepping method. Furthermore, the proposed method presented the terrain following maneuver maintaining the desired altitude.

방제드론 전용노즐의 유효살포폭 내 액적분포 및 수치해석 시뮬레이션 (Simulation of The Effective Distribution of Droplets and Numerical Analysis of The Control Drone-Only Nozzle)

  • 임진택;유성구
    • 문화기술의 융합
    • /
    • 제10권2호
    • /
    • pp.531-536
    • /
    • 2024
  • 최근 농업분야의 스마트 농기계로 분류되고 있는 방제드론은 농촌지역의 고령화 시대를 맞이하여 작업 시간 단축과 방제효과를 높이기 위해 하드웨어 및 소프트웨어를 결합하여 스마트 방제 및 자동방제 시스템 구축을 위해 노력하고 있다. 본 논문에서는 관리관제 및 자동방제 시스템 구축을 위한 기초연구로 방제드론 전용노즐의 특성을 분석하였다. 다양한 드론 모델의 종류, 방제사, 바람, 비행속도, 비행고도, 날씨 조건, UAV 농약 종류 등 다양한 변수를 고려하기 위해서는 노즐의 특성파악과 범용성을 고려하여 약제살포 기준 제시가 가능한 관련 연구가 필요하다. 따라서 다양한 변수 고려가 가능하도록 자체 설계노즐을 기반으로 유동해석(CFD) 시뮬레이션을 실시하고 감수지 실험을 통하여 액적분포의 이론값과 실험값을 비교 분석하였다. 추후 드론운용에 따른 다양한 변수를 고려하여 정확한 비산을 산출하고 관리관제 및 자동방제 시스템에 활용하고자 한다.

장애물회피소나 빔 모델링 기반의 국부경로제어 기법 연구 (Study on Local Path Control Method based on Beam Modeling of Obstacle Avoidance Sonar)

  • 김현식
    • 한국지능시스템학회논문지
    • /
    • 제22권2호
    • /
    • pp.218-224
    • /
    • 2012
  • 최근에는, 초소형 AUV(Autonomous Underwater Vehicle)의 개발에 대한 요구가 증가하고 있으므로 그 요소 기술의 확보가 시급하다. 요소 기술의 하나로서 국부경로제어의 기존 연구에서는 주로 전방감시소나(Forward Looking Sonar : FLS)의 정보를 활용하고 있는데, FLS의 크기는 초소형 AUV에 적합하지 않으므로 장애물회피소나(Obstacle Avoidance Sonar : OAS)를 이용하는 것이 바람직하다. 요약하면, 초소형 AUV를 위한 OAS 기반의 국부경로제어 시스템은 다음과 같은 문제점들을 가지고 있다. 즉, OAS는 낮은 방위(bearing) 분해능 및 지역적인 거리(range) 정보를 제공하며, 임무시간을 증대하기 위해서 에너지 소비가 적은 시스템을 필요로 한다. 나아가, 구조 및 파라메터 관점에서 용이한 설계 절차를 요구한다. 이 문제를 해결하기 위해서 OAS 빔 모델링을 기반으로 진화 전략(Evolution Strategy : ES) 및 퍼지논리 제어기(Fuzzy Logic Controller : FLC)를 이용하는 지능형 국부경로제어 기법이 제안되었다. 제안된 기법의 성능을 검증하고 특성을 분석하기 위해서 수중비행체(Underwater Flight Vehicle : UFV)의 수평면 침로(course) 제어가 수행되었다. 시뮬레이션 결과는 제안된 기법에 있어서 실제 적용의 가능성과 추가 연구의 필요성을 보여준다.