• 한국구조물진단유지관리공학회 논문집
• /
• 제26권6호
• /
• pp.222-229
• /
• 2022

외부 긴장재를 사용하는 PSC I 보는 외부긴장재의 복합 거동으로 해석적인 예측이 어렵다. 이러한 점을 고려하여 단면 보강용 외부 긴장강선의 사용으로 인한 휨 성능을 검증하고, 하중으로 인한 외부 강선의 응력증가량 식을 제안하여 식의 검토를 위하여 실험적 연구를 수행하였다. 검증을 위해 외부 강선의 유·무에 따른 두 개의 실험체를 제작하여 정적 하중 재하실험을 실시하였다. 실험의 연구 데이터를 비교 분석한 결과, 단면 보강용 외부 긴장강선의 사용으로 인하여 휨 성능이 증가하였다. 또한, 제안한 외부 강선의 응력증가량식을 사용하여 휨 강도를 산정한 결과값과 실험적 데이터를 비교한 결과 두 값이 거의 일치하였다. 결과적으로 단면 보강용 외부 긴장 강선으로 보강한 PSC I 보 휨 성능의 향상을 입증하였고, 제안된 응력증가량 식이 타당하였다.

• 한국강구조학회 논문집
• /
• 제21권5호
• /
• pp.443-450
• /
• 2009

이 연구는 열하중이 발생하는 구조물에 강판 콘크리트구조를 적용하는 경우, 역학적 특성을 평가하기 위하여 수행하였다. 원자력발전소 구조물 중 사용후 핵연료 저장조 구조물과 같이, 구조물 내부는 지속적인 열 하중을 받고 구조물 외부는 대기에 노출되어 있는 경우, 구조물은내 외부의 온도차이로 인해서 열응력이 발생한다. 본 연구는 이러한 구조물에 강판 콘크리트 구조를 적용할 경우를 가정하여 보 형태의 강판 콘크리트 구조실험체에 온도하중을 재하한 상태에서 휨 내력 및 구조특성을 평가하고 추가적으로 실험체가 항복 시까지 하중을 가력하여 최종 휨내력을 평가하였다.

• Smart Structures and Systems
• /
• 제25권4호
• /
• pp.409-422
• /
• 2020

This article deals with the flexural analysis of anti-symmetric cross-ply laminated plates under nonlinear thermal loading using a refined plate theory with four variables. In this theory, the undetermined integral terms are used and the number of variables is reduced to four, instead of five or more in other higher-order theories. The boundary conditions on the top and the bottom surfaces of the plate are satisfied; hence the use of the transverse shear correction factors is avoided. The principle of virtual work is used to obtain governing equations and boundary conditions. Navier solution for simply supported plates is used to derive analytical solutions. For the validation of the present theory, numerical results for displacements and stresses are compared with those of classical, first-order, higher-order and trigonometric shear theories reported in the literature.

• Structural Engineering and Mechanics
• /
• 제12권1호
• /
• pp.1-16
• /
• 2001

A reliable and accurate method has been developed to predict the flexural deformation response of structural concrete members subject to service load. The method that has been developed relates the extent of concrete cracking, measured as a function of the magnitude of applied moment in a member, to the reduction in the effective moment of inertia of cracked reinforced concrete members under service load conditions. The ratio of the area of the moment diagram where the moment exceeds the cracking moment, to the total area of the moment diagram for any loading, provides the basis for the calculation of the effective moment of inertia. This ratio also represents mathematically a probability of crack occurrence. Verification of this method for the determination of the effective moment of inertia has been achieved from an experimental test program, and has included beam tests with different loading configurations, and shear wall tests subjected to a range of vertical and lateral load levels. Further verification of this method has been made with reference to the experimental investigation of other recently published work.

• 대한토목학회논문집
• /
• 제6권2호
• /
• pp.103-109
• /
• 1986

본(本) 논문(論文)에서는 작용되는 피로하중의 크기에 따른 콘크리트의 피로수명분포를 연구(硏究)하였다. 콘크리트보에 대하여 휨피로 실험을 수행하였으며, 피로응력의 크기는 세 가지로서 정적휨강도의 각각 85%, 75% 및 65%로 하여 피로수명을 측정하였다. 본 연구의 실험결과 피로하중의 크기에 따라 확률분포함수의 형태가 비교적 크게 달라짐을 발견하였으며, 이것은 콘크리트의 피로신뢰해석시 피로하중의 크기에 대한 영향을 고려해야 함을 말해 주고 있다. 분포매개변수의 결정은 도식법, 모멘트법 및 Maximum Likelihood 방법에 의거하였다. 콘크리트의 휨피로수명의 Weibull 분포(分布) 형상매개변수는 하중의 크기에 따라 2.0~4.0의 범위에 있는 것으로 나타났다.

• Structural Engineering and Mechanics
• /
• 제40권6호
• /
• pp.847-866
• /
• 2011

The objective of this study was to experimentally investigate the bond-related tension stiffening behavior of flexural reinforced concrete (RC) beams made with lightweight aggregate concrete (LWAC) under various high-cycle fatigue loading conditions. Based on strain measurements of tensile steel in the RC beams, fatigue-induced degradation of tension stiffening effects was evaluated and was, compared to reinforced normal weight concrete (NWC) beams with equal concrete compressive strengths (40 MPa). According to applied load-mean steel strain relationships, the mean steel strain that developed under loading cycles was divided into elastic and plastic strain components. The experimental results showed that, in the high-cycle fatigue regime, the tension stiffening behavior of LWAC beams was different from that of NWC beams; LWAC beams had a lesser reduction in tension stiffening due to a better bond between steel and concrete. This was reflected in the stability of the elastic mean steel strains and in the higher degree of local plasticity that developed at the primary flexural cracks.

• Structural Engineering and Mechanics
• /
• 제67권2호
• /
• pp.165-173
• /
• 2018

A simple predicted model using a modified Shear-lag method was used to represent the moisture absorption effect on the stiffness degradation for $[0/90]_{2s}$ composite laminates with transverse cracks and under flexural loading. Good agreement is obtained by comparing the prediction model and experimental data published by Smith and Ogin (2000). The material properties of the composite are affected by the variation of temperature and moisture absorption. The transient and non-uniform moisture concentration distribution give rise to the transient elastic moduli of cracked composite laminates. The hygrothermal effect is taken into account to assess the changes in the normalised axial and flexural modulus due to transverse crack. The obtained results represent well the dependence of the stiffness properties degradation on the cracks density, moisture absorption and operational temperature. The composite laminate with transverse crack loaded in axial tension is more affected by the hygrothermal condition than the one under flexural loading. Through this theoretical study, we hope to contribute to the understanding of the moisture absorption on the composite materials with matrix cracking.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권6호
• /
• pp.183-190
• /
• 2006

본 연구는 철근콘크리트 보에 대해 선가력 후 보강재료별로 보강 효과를 파악하기 위하여 휨 실험한 결과, 다음과 같은 결론을 얻었다. 실험결과, CB 보강 실험체가 콘크리트 내부에 매입되어 일체 거동함으로써 휨내력 향상 및 연성능력 면에서 가장 우수한 것으로 나타났으며, 섬유계 보강재인 CFS와 GFS 보강 실험체 또한 우수한 내력을 가지는 것으로 나타났다. GSP 보강실험체의 경우 다른 보강 실험체에 비해 보강재 자체의 내력은 큰데 반해 콘크리트와 부착성이 떨어져 상대적으로 낮은 보강효과를 보였으며 실제 구조체에서는 콘크리트와 부착성이 개선 되어 보다 큰 보강효과를 발휘할 것으로 사료된다.

• Steel and Composite Structures
• /
• 제45권1호
• /
• pp.133-145
• /
• 2022

Steel fiber composite bar (SFCB) is a novel type of reinforcement, which has good ductility and durability performance. Due to the unique pseudo strain hardening tensile behavior of SFCB, different flexural behavior is expected of SFCB reinforced concrete (SFCB-RC) beams from traditional steel bar reinforced concrete (S-RC) beams and FRP bar reinforced concrete (F-RC) beams. To investigate the flexural behavior of SFCB-RC beam, four points bending tests were carried out and different flexural behaviors between S/F/SFCB-RC beams were discussed. An flexural analytical model of SFCB-RC beams is proposed and proved by the current and existing experimental results. Based on the proposed model, the influence of the fiber volume ratio R of the SFCB on the flexural behavior of SFCB-RC beams is discussed. The results show that the proposed model is effective for all S/F/SFCB-RC flexural members. Fiber volume ratio R is a key parameter affecting the flexural behavior of SFCB-RC. By controlling the fiber volume ratio of SFCB reinforcements, the flexural behavior of the SFCB-RC flexural members such as bearing capacity, bending stiffness, ductility and repairability of SFCB-RC structures can be designed.

• Structural Engineering and Mechanics
• /
• 제68권2호
• /
• pp.193-201
• /
• 2018

This paper describes an experimental study on the seismic performance of steel reinforced concrete (SRC) T-shaped columns. The lateral loads were applied along the web of the column with different loading histories, such as monotonic loading, mixed loading of variable amplitude cyclic loading and monotonic loading, constant amplitude cyclic loading and variable amplitude cyclic loading. The failure modes, load-displacement curves, characteristic loads and displacements, ductility, strength and stiffness degradations and energy dissipation capacity of the column were analyzed. The effects of loading history on the seismic performance were focused on. The test results show that the specimens behaved differently in the aspects of the failure mode subject to different loading history, although all the failure modes can be summarized as flexural failure. The hysteretic loops of specimens are plump, and minimum values of the failure drift angles and ductility coefficients are 1/24 and 4.64, respectively, which reflect good seismic performance of SRC T-shaped column. With the increasing numbers of loading cycles, the column reveals lower bearing capacity and ductility. The strength and stiffness of the column with variable amplitude cyclic loading degrades more rapidly than that with constant amplitude cyclic loading, and the total cumulative dissipated energy of the former is less.