• Korea Journal of Hospital Management
• /
• v.12 no.1
• /
• pp.75-99
• /
• 2007

The purpose of this study was to provide basic materials needed to enhance quality of organizational life by identifying the improvements of labor union management in the perspective of general hospital organization management. The subjects of this study were 428 employees in 8 Hospitals in Metro Capital including Seoul. Materials were collected from administrators, nurses and medical technicians in target hospitals from November 10 to November 30, 2006 through survey questionnaires. The main results of this study were as follows: 1. The commitment level of the subjects according to their characteristics was higher in older employees than the younger ones, large family to support than small family to support and those who had higher positions in labor union. 2. The commitment level of the subjects according to the Job and role related variables were higher those who had higher satisfaction level to their job, role conflict in all hospitals. 3. The commitment level of the subjects according to union related variables, variables jointly controlled by union and employer was statistically significant positive correlation. 4. The results of multiple regression analysis shows that formal and informal socialization, satisfaction with the labor union's were all found as important antecedents of labor union commitment. 5. The results of AMOS shows that structure characteristics of hospital, Job and manager satisfaction, socialization were statistically significant labor union satisfaction. The satisfaction level of labor union was statistically significant labor union commitment To summarize study results, the level of commitment in labor union depends on job satisfaction, managers' attitudes, union satisfaction factors, their colleagues attitudes toward union. Therefore hospital managers should have democratic and flexible attitudes toward labor union. Additionally, as formal and informal socialization is important determinant in union commitment, hospital managers should have countermeasures to enhance the colleague attitude and job satisfaction level of hospital employees. Moreover, as managerial factors of the principal of hospital influence union commitment directly, the attitudes of hospital managers toward union and transparency of hospital management should be improved.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.544-549
• /
• 2015

Since LEDs (light emitting diodes) have many advantages as a light source in vehicle headlamp, such as good reliability, energy and space saving, and flexible headlamp design. On the other hand, the dependence of its performance and life on temperature have great influence on its practical use. In this study, design and fabrication of heat sink for vehicle LED headlamp were performed using thermally-conductive plastics. This study focused on the effective heat sink structure with limited space in the vehicle LED headlamp. We designed two different prototype of heat sink by thermal simulation using SolidWorks program, which had excellent temperature characteristics. The two different prototype of heat sink were fabricated by injection molding with thermally-conductive plastics. The results showed that LED $T_j$ (junction temperature) of sample B (model 1) and sample C (model 1, 2) was below then $165^{\circ}C$ when applying the thermally-conductive plastics in heat sink of vehicle LED headlamp.

• BMB Reports
• /
• v.43 no.3
• /
• pp.176-181
• /
• 2010

The primary sigma factor ($\sigma^{A}$) of Staphylococcus aureus, a potential drug target, was little investigated at the structural level. Using an N-terminal histidine-tagged $\sigma^{A}$ (His-$\sigma^{A}$), here we have demonstrated that it exits as a monomer in solution, possesses multiple domains, harbors primarily $\alpha$-helix and efficiently binds to a S. aureus promoter DNA in the presence of core RNA polymerase. While both N- and C-terminal ends of His-$\sigma^{A}$ are flexible in nature, two Trp residues in its DNA binding region are buried. Upon increasing the incubation temperature from 25$^{\circ}$ to 40$^{\circ}C$, $\sim$60% of the input His-$\sigma^{A}$ was cleaved by thermolysin. Aggregation of His-$\sigma^{A}$ was also initiated rapidly at 45$^{\circ}C$. From the equilibrium unfolding experiment, the Gibbs free energy of stabilization of His-$\sigma^{A}$ was estimated to be +0.70 kcal $mol^{-1}$. The data together suggest that primary sigma factor of S. aureus is an unstable protein. Core RNA polymerase however stabilized $\sigma^{A}$ appreciably.

• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1863-1872
• /
• 2006

In FMS (Flexible Manufacturing System) and CIM (Computer Integrated Manufacturing), machine-tools have been the target of integration in the last three decades. The conventional concept of integration is being changed into the autonomous manufacturing device based on the knowledge evolution by applying advanced information technology in which an open architecture controller, high-speed network and internet technology are included. In the advanced environment, the machine-tools is not the target of integration anymore, but has been the key subject of cooperation. In the near future, machine-tools will be more improved in the form of a knowledge-evolutionary intelligent device. The final goal of this study is to develop an intelligent machine having knowledge-evolution capability and a management system based on internet operability. The knowledge-evolutionary intelligent machine-tools is expected to gather knowledge autonomically, by producing knowledge, understanding knowledge, reasoning knowledge, making a new decision, dialoguing with other machines, etc. The concept of the knowledge-evolutionary intelligent machine is originated from the machine control being operated by human experts' sense, dialogue and decision. The structure of knowledge evolution in M2M (Machine to Machine) and the scheme for a dialogue agent among agent-based modules such as a sensory agent, a dialogue agent and an expert system (decision support agent) are presented in this paper, with intent to develop the knowledge-evolutionary machine-tools. The dialogue agent functions as an interface for inter-machine cooperation. To design the dialogue agent module in an M2M environment, FIPA (Foundation of Intelligent Physical Agent) standard platform and the ping agent based on FIPA are analyzed in this study. In addition, the dialogue agent is designed and applied to recommend cutting conditions and thermal error compensation in a tapping machine. The knowledge-evolutionary machine-tools are expected easily implemented on the basis of this study and shows a good assistance to sensory and decision support agents.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1381-1388
• /
• 1993

This paper presents a method for the simultaneous optimal design of structural and control systems. Sensitivities of performance index with respect to structural design variables are analyzed. The structural design variables are optimized to minimize the performance index by use of conjugate gradient method. The method is applied to a half model of an active vehicle suspension system with elastic body moving on a randomly profiled road. The suspension control force of an optimally controlled system in the presence of measurement errors are calculated by use of linear quadratic Gaussian control theory and Kalman filter theory. The performance index contains ride comfort, road holding and working space of suspension. The structural design variables taken are stiffness, daming properties and the position of the suspension system. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of an optimal simultaneous structure/control system is compared with that of an optimal controlled system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9A
• /
• pp.837-843
• /
• 2006

IEEE802.15.3 and IEEE802.15.4 have defined the hybrid MAC protocols based on TDMA and CSMA where a multi-frame TDMA structure is employed so that multiple data frames can be transmitted within one timeslot to guarantee minimum delay bounds of isochroous traffic. However, TDMA has an intrinsic problem that cannot dynamically allocate optimal length of timeslot to each station. Therefore the idle timeslot can be produced by stations when each transmission queue is instantaneously empty during its timeslot, which would waste lots of timeslots especially in the multi-frame TDMA systems. In this paper, we propose a more flexible multiple-access scheme for the multi-frame TDMA system based on the concept of virtual slot which is accessible by every station with the highest priority for slot owner and lower priority for other stations. Finally, our simulation results from various environments show that proposed scheme can achieve magnitude improvement of total system throughput and average message delay by maximizing channel utilization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.527-536
• /
• 2004

A novel hybrid multiple access system, TD-BCDMA, where Binary CDMA that maintains a constant amplitude by clipping the summation of input signals multiplied by the orthogonal codes is transmitted over a TDMA frame structure, was Nosed. In every time slot of TDMA, binary CDMA modulated multiple channel signals are transmitted with the same waveform of TDMA. TD-BCDMA has all the advantages of TDMA. Flexible adjustment of the data transmission rate In demand is possible by adjusting the number of codes and time slots assigned to each user. This property was used to show an example of Ad Hoc network applications. To obtain a proper synchronization scheme for TD-BCDMA, the Receiver Operating Characteristics performance and the false alarm probability and false dismissal probability under various channel environment of two different schemes, a preamble scheme as in TDMA and a synchronization channel scheme as in CDMA were compared. It was proved that the preamble scheme is more practical and suitable than the synchronization channel scheme for the hybrid multiple access system.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.2S
• /
• pp.721-732
• /
• 2000

Multimedia communication systems require not only high-performance computer hardwares and high-speed networks, but also a buffer management mechanism to process many data efficiently. Two buffer handling methods, Push and Pull, are commonly used. In the Push method, a server controls the flow of dat to a client, while in the Pull method, a client controls the flow of data from a server. Those buffering schemes can be applied to the data transfer between the packet receiving buffer, which receives media data from a network server, and media playout devices, which play the recived media data. However, the buffer management mechanism in client-sides mainly support either one of the Push or the Pull method. Consequently, they have some limitations to support various media playout devices. Futhermore, even though some of them support both methods, it is difficult to use since they can't provide a unified structure. To resolved these problems, in this paper, we propose an efficient and flexible Push/Pull buffer management mechanism at client-side. The proposed buffer management scheme supports both Push and Pull method to provide various media playout devices and to support buffering function to absorb network jitter. The proposed scheme can support the various media playback devices using a single buffer space which in consequence, saves memory space compared to the case that a client keeps tow types of buffers. Moreover, it facilitates the single buffer as a mechanism for the absorbing network jitter effectively and efficiently. The proposed scheme has been implemented in an existing multimedia communication system, so called ISSA (Integrated Streaming Service Architecture), and it shows a good performance result compared to the conventional buffering methods in multimedia communication environments.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.541-549
• /
• 2015

A large volume of continuously growing BGP data files can raise two technical challenges regarding scalability and manageability. Due to the recent development of the open-source distributed computing infrastructure, Hadoop, it becomes feasible to handle a large amount of data in a scalable manner. In this paper, we present a new Hadoop-based BGP tool (BGPdoop) that provides the scale-out performance as well as the extensible and agile analysis capability. In particular, BGPdoop realizes a query-based BGP record exploration function using Hive on the partitioned BGP data structure, which enables flexible and versatile analytics of BGP archive files. From the experiments for the scalability with a Hadoop cluster of 20 nodes, we demonstrate that BGPdoop achieves 5 times higher performance and the user-defined analysis capability by expressing diverse BGP routing analytics in Hive queries.

• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.115-125
• /
• 2005

This paper discusses how to effectively design a next-generation wireless communication system that can possibly provide very high data-rate transmissions and versatile quality services. In order to accommodate the sophisticated user requirements and diversified user environments of the next-generation systems, it should be designed to take an efficient and flexible structure for multiple access and resource allocation. In addition, the design should be optimized for cost-effective usage of resources and for efficient operation in a multi-cell environment. As orthogonal frequency division multiple access (OFDMA) has turned out in recent researches to be one of the most promising multiple access techniques that can possibly meet all those requirements through efficient radio spectrum utilization, we take OFDMA as the basic framework in the next-generation wireless communications system design. So, in this paper, we focus on introducing an OFDMA-based downlink system design that employs the techniques of hybrid multiple access (HMA) and frequency group (FG) in conjunction with intra-frequency group averaging (IFGA). The HMA technique combines various multiple access schemes on the basis of OFDMA system, adopting the multiple access scheme that best fits to the given user condition in terms of mobility, service, and environment. The FG concept and IFGA technique help to reduce the feedback overhead of OFDMA system and the other-cell interference (OCI) problem by grouping the sub-carriers based on coherence band-widths and by harmonizing the channel condition and OCI of the grouped sub-carriers.