• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.20 no.1
• /
• pp.11-16
• /
• 2009

OPD based laryngeal procedures offers a new avenue to the modern laryngologist, incorporating new technology in the office setting. With the development of flexible fiberoptic endoscopes, compact video system, and short acting anesthetics and sedatives allow these procedures. The success or failure of procedures are depend on excellent topical anesthesia. An inadequately anesthetized patient is apt to be uncomfortable, anxious and hyperresponsive and therefore unlikely to tolerate the procedure. On the other hand, a patient who is well informed, reassured, and thoroughly anesthetized can complete procedures. Therefore, optimal anesthesia is obligatory for excellent surgical results. The phonosurgeon should choose the anesthetic and sedative agents based on duration of action, time of onset of action, and any medical contraindications that the patient may have. And should be familiar with the properties and interaction of the agents used, as well as the signs of toxicity.

• Korean Medical Education Review
• /
• v.13 no.1
• /
• pp.3-11
• /
• 2011

Every medical school aims to provide better education, and it sometimes requires changing the current education system. However, an attempt for a change may not always be successful. In many cases, it is so not because an intended change was not properly directed but because conflicts in the process of adopting the change were not properly handled. This paper suggests seven points for how to successfully bring a change in medical education. First, the medical education should not simply focus on the pass rate of the national medical examination but also on the cultivation of creative leaders. Second, the faculty of medical school should be creative, self-motivated, and passionate. Third, people in charge of an intended change should have a good understanding of complicated dynamics between the dean's office, medical education experts, professors, and students. Fourth, people who are leading the change should also grasp the possibility that a well-intended change might not be well-received by professors, students, and dean due to their tendency to be complacent with the current system. Fifth, a successful introduction of a change requires good teamwork of a thinker, an actor, and a coordinator. Sixth, a change takes time as it takes place through a step-by-step process. Seventh, an attempt for a change accompanies a negotiation with professors with different thoughts and views regarding education, and people who want a change need to be flexible in that negotiation. In addition to these seven points, people who are responsible for a change should be consistent and consider the renown of the school.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.619-627
• /
• 2020

This study measures the relationship between labor productivity and national competitiveness. Through the shift- share analysis method, the paper has separated labor productivity into three factors: static shift effect, dynamic shift effect and endogeneous effect. Next, in combination with the Granger causality test, the paper examines the relationship between the factors constituting labor productivity and competitiveness during the period from 2005 to 2017. Research data is collected from General Statistics Office and annual global competitiveness reports. The results show that the interaction between labor productivity with global competitiveness index (GCI) in Vietnam has similar variation. Nevertheless, when separating labor productivity into three effects, this relationship shows more clearly that the impact of labor productivity on GCI scores is mainly caused by endogeneous effect, not by static shift effect or dynamic shift effect. Therefore, in order to improve its competitiveness, Vietnam should focus on a number of solutions: reforming the education system towards developing thinking capacity and creative capacity; fostering industrial manners to create dynamic and flexible workers; building the State with sufficient capacity to implement consistent and transparent policies; formulating policies to attract all economic sectors so that they actively participate in the field of human resource training for the country.

• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.125-139
• /
• 2012

Machine-to-Machine(M2M) refers to technologies allowing both wireless and wired systems to communicate with other devices. The enhancement of wireless technologies and the reduced cost of wireless connection have contributed toward the development of M2M market. M2M market currently focuses on public sector services, As M2M can offer scalable and flexible services, M2M services are expected to be applied in various fields. However there are still some doubts on whether the demand for M2M services will be increased. This study investigates the feasibility of M2M services from the perspective of operators. Operators evaluate that M2M services will show high marketability but low profitability in general. In addition, operators predict that M2M services will show both marketability and profitability in the area of car maintenance, insurance, telematics, home and office security, shop floor maintenance, and real-time locating services for children protection. This study may offer some ideas of M2M business models based on empirical feasibility studies.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.1
• /
• pp.43-50
• /
• 2015

Lightweight Foamed Soil (LWFS) is a useful material for underground pipe backfill because of reusability of excavated soil and no compaction effect. In this research, a pilot test is carried out and monitoring results are analyzed to investigate behaviors of a flexible pipe, when LWFS is applied as a backfill material. Simultaneously, they are compared with another test case which is backfilled with Saemangeum dredged soil. As a result, the vertical earth pressure of the case backfilled with LWFS slurry presents that decreases as much as 25.6% in comparison with dredged soil and it is only within 10% after solidification. In case backfilled with dredged soil, the horizontal earth pressure is more than 3.6 times of the case used by LWFS and the vertical and horizontal deformation is more than 3.2 and 2.6 times of the case, respectively. It presents excellent effects on earth pressure and deformation reduction of LWFS. The stresses measured at the upper side of the pipe generally present compressive aspects in case backfilled with dredged soil. However, they present tensile aspects in case of LWFS. It is because of negative moment occurred at the center of the pipe due to the buoyancy from LWFS slurry. Conclusively, LWFS using Saemangeum dredged soil is very excellent material to use near the area in comparison with the dredged soil. However, the countermeasure to prevent the buoyancy is required.

• Journal of the HCI Society of Korea
• /
• v.10 no.2
• /
• pp.13-19
• /
• 2015

Display technology has recently made enormous progress. In particular, display companies are competing each other to develop flexible display. Curved display, as a precursor of flexible display, are now used for smart phones and TVs. Curved monitors have been just introduced in the market, and are used for office work or entertainment. The aim of the current study was to investigate whether the curvature of a 42" multi-monitor affects postural control when it is used for entertainment purpose. The current study used two curvature levels (flat and 600mm). Ten college students [mean(SD) age = 20.9 (1.5)] with at least 20/25 visual acuity, and without color blindness and musculoskeletal disorders participated in this study. In a typical VDT environment, each participant played a car racing video game using a steering wheel and pedals for 30 minutes at each curvature level. During the video game, a pressure mat on the seat pan measured the participant's COP (Center of Pressure), and from which four measures (Mean Velocity, Median Power Frequency, Root-Mean-Square Distance, and 95% Confidence Ellipse Area) were derived. A larger AP (Anterior-Posterior) RMS distance was observed in the flat condition, indicating more forward-backward upper body movements. It can be partly due to more variability in visual distance across display, and hence longer ocular accommodation time in the case of the flat display. In addition, a different level of presence or attention between two curvature conditions can lead to such a difference. Any potential effect of such a behavioral change by display curvature on musculoskeletal disorders should be further investigated.

• Journal of Family Resource Management and Policy Review
• /
• v.26 no.3
• /
• pp.87-106
• /
• 2022

This study compared working arrangements, interest in rural migration, and life satisfaction in Japan in two periods: immediately after the COVID-19 (2019 coronavirus disease) pandemic and two years after the global outbreak. The comparison was based on data from the "Survey on Changes in Attitudes and Behaviors in Daily Life under the Influence of Novel Coronavirus Infection, 2020, 2021", which was conducted four times by the Japanese Cabinet Office directly after the COVID crisis (May 2020 and September 2021). The respondents who participated in both the first and fourth surveys were employed individuals aged 20 years or older. The results are as follows. First, the proportion of Tokyo residents engaging in telework immediately after the COVID-19 pandemic was 36.1%, which is higher than the levels observed nationwide. Second, individuals involved in telework and those working under flexible arrangements were more highly interested in moving to rural areas than those who commute to work. Third, among people engaged in telework, life satisfaction diminished immediately after the COVID-19 pandemic compared with the period before this crisis. After two years of the pandemic, however, life satisfaction among this group improved. Changes in working arrangements due to the pandemic can be expected to promote migration, as well as help revitalize regions and encourage the discovery of new lifestyles.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.19-24
• /
• 1998

The main goal of this paper is to propose and to test a radio protocol based CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) for the purpose of enhancing the existing medical information system. The feature of the new medical information system, Medical Application Radio System(MARS), which operating in real time is the transmission of medical information in bi-direction between the hospital control office and patients mobile stations. MARS monitors patients linked to the network by radio and provides quick alarm, flexible documentation capabilities, asnd fast treatment for the analysis of collected medical data. The existing medical information system, radio telemetry system which transfers the message of patients to the CAP(Central Access Point) unit in one way at the speed of 9.6Kbps and operates a channel frequency bandwidth. To verify the Performance of the proposed system, we have performed the numerical analysis and have implemented a test system which consists of the 2.4Ghz radio transceiver and personal computer.

• The Journal of Information Systems
• /
• v.29 no.3
• /
• pp.179-195
• /
• 2020

Purpose & Design/methodology/approach Amidst the COVID-19 spread, interest in telework has been increasing as a way to respond to environmental changes and improve organizational performance. In this study, causal loop diagram, thinking process, and four principles of TRIZ were used to find various ways to achieve work-life balance for workers and firms in teleworking environment. Findings The result of the causal loop diagram shows that keeping work-life balance is needed to provide free extra time for workers and achieve the firm's performance through efficient coordination between departments in teleworking environment. Using thinking process of TOC, we proposed a evaporating cloud for work-life balance and reviewed assumptions and premises to maintain extra free time for workers and achieve firm's performance paradoxically, and suggested solutions through the breakdown of the assumptions and premises. Resolving the contradiction(RC) by spatial separation is to divide working spaces into home, smart center, and mobile work types, to find both ways to achieve the organizational performance, and to provide extra time for workers. RC by temporal separation is to divide working time into various unit time, and to find ways to achieve organizational performance through doing work at office or home periodically or shiftly according to a predetermined schedule and time setting. RC by situational separation is to give options of flexible methods of performing work according to the conditions of the company or the worker. RC by separation between part and a whole is to find ways to organize and do the work so that the entire work can be completed efficiently even if each work is performed separately in teleworking way. This study is meaningful in that it provides basic thinking framework for achieving work-life balance in teleworking environment and proposes ways to resolve conflict from various perspectives, but it is limited in that it has not been tested empirically.

• Architectural research
• /
• v.22 no.2
• /
• pp.41-52
• /
• 2020

Laboratory buildings with specialized equipment and ventilation systems pose challenges in terms of efficient energy use and initial construction costs. Additionally, lab spaces should have flexible and efficient layouts and provide a comfortable indoor research environment. Therefore, this study aims to identify the correlation between the facade of a building and its interior layout from case studies of energy-efficient research labs and to propose passive energy design strategies for the establishment of an optimal research environment. The case studies in this paper were selected from the American Institute of Architects Committee on the Environment Top Ten Projects and Leadership in Energy and Environmental Design (LEED) certified research lab projects. In this paper, the passive design strategies of space zoning, façade design devices to control heating and cooling loads were analyzed. Additionally, the relationships between these strategies and the interior lab layouts, lab support spaces, offices, and circulation areas were examined. The following four conclusions were drawn from the analysis of various cases: 1) space zoning for grouping areas with similar energy requirements is performed to concentrate similar heating and cooling demands to simplify the HVAC loads. 2) Public areas such as corridor, atrium, or courtyard can serve as buffer zones that employ passive solar design to minimize the mechanical energy load. 3) A balanced window-to-wall ratio (WWR), exterior shading devices, and natural ventilation systems are applied according to the space programming energy requirements to minimize the dependence on mechanical service. 4) Lastly, typical laboratory space zoning categories can be revised, reversed, and even reconfigured to minimize the energy load and adjust to the site context. This study can provide deep insights into various design strategies employed for construction of green laboratories along with intuitive arrangement of various building components such as laboratory spaces, lab support spaces, office spaces, and common public areas. The key findings of this study can contribute towards creating improved designs of laboratory facilities with reduced carbon footprint and greenhouse emissions.