• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.695-696
• /
• 2007

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.56-62
• /
• 2013

The laser cutting process which is flexible and rapid usually provides a better result in cutting of flexible printed circuit boards (FPCB). However, circuit-short by the re-deposition of debris from laser ablation or its heat affect zone (HAZ) on the cutting surfaces can be a problem. A laser cutting process of FPCB in the presence of liquid can minimize these negative effects. The temperature distribution of copper and polymer parts of FPCB was analyzed with numerical simulation and the experimental results were presented to evaluate this process. Generally, laser cutting under liquid has advantages of less re-deposition of carbides and less HAZ on the cutting edges. However, bubble generation and laser beam control through the liquid media should be considered carefully to obtain a successful result.

• Transactions on Electrical and Electronic Materials
• /
• 제13권3호
• /
• pp.129-135
• /
• 2012

A number of surface mount technology (SMT) process variables including land design are considered for minimizing tombstone defect in flexible printed circuit assembly in high volume manufacturing. As SMT chip components have been reduced over the past years with their weights in milligrams, the torque that once helped self-centering of chips, gears to tombstone defects. In this paper, we have investigated the correlation of the assembly process variables with respect to the tombstone defect by employing statistically designed experiment. After the statistical analysis is performed, we have setup hypotheses for the root causes of tombstone defect and derived main effects and interactions of the process parameters affecting the hypothesis. Based on the designed experiments, statistical analysis was performed to investigate significant process variable for the purpose of process control in flexible printed circuit manufacturing area. Finally, we provide beneficial suggestions for find-pitch PCB design, screen printing process, chip-mounting process, and reflow process to minimize the tombstone defects.

• 한국정밀공학회지
• /
• 제27권2호
• /
• pp.20-24
• /
• 2010

High speed cutting processes of rigid flexible printed circuit board by making use of high power UV laser with nano-second pulse width have been proposed and investigated experimentally. Also robust laser cutting system has been designed and developed in order to obtain a good cutting quality of rigid and flexible PCB with multi-layers (2-6 layers). Power controller module developed for ourselves is adapted to control the laser output power in the range less than 1%. The systems show the good performance of cutting speed, cutting width and cutting accuracy, respectively. Especially we have confirmed that the short circuit problem due to the carbonized contamination occurred in cross section of multi-layers by thermal effect of high power laser has been improved largely by using multi-pass cutting process with low power and high speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.1069-1070
• /
• 2013

• 센서학회지
• /
• 제18권5호
• /
• pp.359-364
• /
• 2009

This paper presents flexible electrocardiography(ECG) sensors using micro electro mechanical systems(MEMS) and flexible printed circuit(FPC) technology. By using FPC technology, ECG sensors which consisted of an outer hook-shaped electrode and an inner circular-shaped electrode were fabricated on the polyimide substrate. Thereafter, the bipolar ECG sensor was miniaturized using MEMS technology. The ECG measurement capability was examined by attaching the sensor to the human chest and wrist. Performance of the proposed sensors was then compared with ECG measured by commercial Ag/AgCl electrodes. It was verified that ECG could be measured using proposed sensors at only single body.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1992년도 춘계공동학술대회 발표논문 및 초록집; 울산대학교, 울산; 01월 02일 May 1992
• /
• pp.159-168
• /
• 1992

생산라인의 line balancing이 흐름생산에 있어서 일관된 생산을 하기 위한 필수조건이다. 여러 다양한 제품을 생산하는 printed circuit board(PCB) 공장에서의 line balancing을 얻기 위해서는 mixed model line balancing절차를 설명하고자 한다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.61-66
• /
• 2012

Linear motors has been developed for factory automation, transportation applications, among other applications. As the trend toward compact sizes in micro electronic products progresses, the required motor drives in these applications need to be downsized with increased power densities. It appears that the winding of miniature linear motors is the most awkward part to be scaled down from conventional motor designs when miniaturizing. This paper presents an alternative design for slotless linear motors. A novel flexible printed circuit winding has been applied to obtain a simplified but qualified result. Having explained the prototyping and inspection, a discussion is given to examine the achievement of this study.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1491-1494
• /
• 2008

Typically internal mobile LCD display modules are connected to the mobile product baseband PCB with flexible printed circuit board equipped with board-to-board connector. This solution has a drawback of limiting the product concept work to certain solutions that are based on connector size, location, flexible PCB length, bending, etc. in the display module. Also flexible printed circuit board based solutions are not completely optimized from reliability point of view, causing flex circuit board breakings. For the external displays in the PC or Home entertainment market, the cable solution is too expensive and resource demanding. The wireless solution has obvious advantages over reliability, low cost and flexibility. This paper describes a wireless audio-visual interface solution.

• 한국전자파학회논문지
• /
• 제19권1호
• /
• pp.61-70
• /
• 2008

본 논문에서는 멤스 기술의 하나인 연성 인쇄 회로 기판을 이용하여 임의의 형태로 변형이 가능한 초고주파 멤스 송신기를 제안하였다. 연성 인쇄 회로 기판은 그 무게가 가볍고 두께가 얇아 경량 소형화 모듈을 만드는데 유리한 장점이 있다. 또한, 연성 인쇄 회로 기판은 종이와 같이 유연한 특성을 가지고 있어 평면이 아닌 임의의 곡면 등에 실장할 수 있는 장정을 가지고 있다. 본 논문에서는 근거리 센서 네트워크 구성을 위한 직교 주파수 분할 다중 전송 방식을 위한 선형 무선 송신기를 설계 제작하였다. 송신 모듈의 능동 회로는 전력효율이 높고 선형성이 우수하여 전력 증폭기에 많이 사용되고 있는 InGaP/GaAs HBT 공정을 사용하여 설계 및 제작하였으며, 매칭 회로 및 필터 등의 수동 회로는 연성 인쇄 회로 기판에 직접 집적화 하여 제작하였다. 제작된 멤스 송신기는 EVM 특성을 통하여 시스템 성능을 분석하였다.