• 한국표면공학회지
• /
• 제47권3호
• /
• pp.99-103
• /
• 2014

The encapsulation method of flexible organic light emitting devices (OLEDs) was investigated for the structure of ITO / 2-TNATA / NPB / $Alq_3$ : Rubrene (1 vol.%) / $Alq_3$ / LiF / Al / $Alq_3$ / LiF / Al (OLED #1), on which $SiN_x$ thin film was deposited and metal film was attached to protect the damage of OLED from oxygen and moisture. The $SiN_x$ thin film was deposited by plasma enhanced chemical vapor deposition (PECVD) method using $SiH_4$ of 20 sccm and $N_2$ of 15~35 sccm as reactor gases. The optimum $SiN_x$ deposition condition was found to be 20 sccm $SiH_4$ and 20 sccm $N_2$ from the Ca test of the fabricated $SiN_x$ thin film. The life time of OLED #1, OLED #1 / $SiN_x$ 200 nm, OLED #1 / $SiN_x$ 400 nm and OLED #1 / $SiN_x$ 400 nm / metal film was 7, 12, 25, and 45 hours, respectively. In conclusion, it has been shown that the lifetime of OLEDs can be improved more than 6 times by $SiN_x$ film and a metal film encapsulation.

• Journal of Information Display
• /
• 제7권3호
• /
• pp.13-18
• /
• 2006

Currently, the flexible organic light emitting devices (OLEDs) are investigated. They are very vulnerable to moisture, and thus have been found to show some problems. Thus, an effective barrier layer is needed to protect from moisture in air. We deposited thin films with magnesium oxide (MgO) and silicon oxide $(SiO_{2})$ compounds mixed at various mixture ratios on flexible polyether sulfone (PES) substrates by an electron-beam evaporator to investigate their applizability for transparent barrier applications. In this study, we found that as the MgO fraction increased, thin films comprised of MgO and $(SiO_{2})$ compounds became more amorphous and their surface morphologies become smoother and denser. In addition, zirconium oxide $(ZrO_{2})$ was added to the above-mentioned compound mixtures. $ZrO_{2}$ made thin mixture films more amorphous and made the surface morphology denser and more uniform. The water vapor transmission rates (WVTRs) of the whole films decreased rapidly. The best WVTR was obtained by depositing thin films of Mg-Si-Zr-O compound among the whole thin films. As the thin mixture films became more amorphous, and the surface morphology become denser and more uniform, the WVTRs decreased. Therefore, the thin mixture films became more suitable for flexible OLED applications as transparent passivation layers against moisture in air.

• 접착 및 계면
• /
• 제24권3호
• /
• pp.86-94
• /
• 2023

OLED 소자를 용액공정으로 제작함에 있어 음극 전극의 용액공정화가 기술적인 난제이므로 별도의 기판에 음극 전극을 형성하고 PEI 층을 접합층으로 사용하여 이를 다른 기판의 소자와 물리적, 전기적으로 연결하는 연구를 진행하였다. PEI 용액의 농도, PEI 층의 두께 및 첨가제 혼합 등을 변수로 하였으며 접착력 측정기와 EOD 소자 제작을 통하여 특성을 확인한 결과는 다음과 같다. PEI 용액의 농도가 높을수록 접착강도가 증가하였으나 막 두께의 증가로 전류 밀도가 감소하였다. 0.1 wt% PEI 용액에 첨가제로서 조비톨과 PEG를 혼합한 결과 PEG를 0.5 wt%의 농도로 혼합한 조건에서 900 mA/cm² 의 최대 전류 밀도를 얻었으며 양호한 접착 상태와 소자의 점등도 확인되었다.

• 마이크로전자및패키징학회지
• /
• 제23권1호
• /
• pp.11-15
• /
• 2016

유기발광다이오드(orgianic light emitting diodes, OLEDs)는 대형 유연 디스플레이와 발광원으로서 사물인터넷 (IoT)의 하드웨어 기기 등 다양한 분야에서 연구가 진행되고 있다. 그러나 낮은 일함수의 금속 및 쉽게 반응하는 유기재료 자체의 특성으로 인하여 외부환경에 매우 취약한 단점을 가지고 있으며 특히, 수분과 산소에 민감하여 외부와의 접촉 시 성능이 급속도로 저하되는 현상을 나타내게 된다. 이를 방지하기 위해 PVD, CVD, ALD 와 같은 방법으로 보호막 형성 연구를 진행 중에 있지만 복잡한 공정 및 높은 비용의 문제점 등이 있다. 그러므로 외부 환경에 의한 성능 저하를 차단해주는 저렴하고 단순한 공정의 페시베이션(passivation) 박막 기술 개발이 매우 중요하다. 본 연구에서는 유기발광다이오드의 수명 향상을 위하여 스핀코팅(spin-coating) 방법으로 녹색 유기발광다이오드 소자 위에 조성비에 따른 페시베이션 박막을 형성한 후 녹색 유기발광다이오드의 휘도특성 변화를 조사하였다. 페시베이션 용액은 poly vinyl alcohol (PVA)를 기반으로 sodium alginate (SA)를 0, 10, 20, 40 wt%의 조성비로 제조하였으며, 40 wt%의 조성비에서 가장 좋은 배리어 보호 특성을 나타내었다. 최종적으로 PVA + SA 용액의 최적화된 페시베이션 보호막을 제작할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.111.2-111.2
• /
• 2015

Typical electrodes (metal or indium tin oxide (ITO)), which were used in conventional organic light emitting devices (OLEDs) structure, have transparency and conductivity, but, it is not suitable as the electrode of the flexible OLEDs (f-OLEDs) due to its brittle property. Although Graphene is the most well-known alternative material for conventional electrode because of present electrode properties as well as flexibility, its carrier injection barrier is comparatively high to use as electrode. In this work, we performed plasma treatment on the graphene surface and alkali metal doping in the organic materials to study for its possibility as anode and cathode, respectively. By using Ultraviolet Photoemission Spectroscopy (UPS), we investigated the interfaces of modified graphene. The plasma treatment is generated by various gas types such as O2 and Ar, to increase the work function of the graphene film. Also, for co-deposition of organic film to do alkali metal doping, we used three different organic materials which are BMPYPB (1,3-Bis(3,5-di-pyrid-3-yl-phenyl)benzene), TMPYPB (1,3,5-Tri[(3-pyridyl)-phen-3-yl]benzene), and 3TPYMB (Tris(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane)). They are well known for ETL materials in OLEDs. From these results, we found that graphene work function can be tuned to overcome the weakness of graphene induced carrier injection barrier, when the interface was treated with plasma (alkali metal) through the value of hole (electron) injection barrier is reduced about 1 eV.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.314-314
• /
• 2009

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.171-174
• /
• 2008

We present results demonstrating that low power consumption phosphorescent AMOLED displays can be fabricated on ultra-thin ($25{\mu}m$) stainless steel substrates, combining an amorphous silicon backplane with a top emission phosphorescent OLED frontplane. We will present preliminary results of flexibility testing on these displays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.641-643
• /
• 2006

Add-Vision has developed a low-cost print technology for P-OLED displays on flexible substrates that meets several essentials for a new technology including: (1) Functionality including low DC voltage and wide color gamut; (2) Utilization of inexpensive tools; (3) Performance matching entry applications and markets. AVI's process is based on large-area printing of a combination of doped emissive and air-stable cathode inks utilizing truly low-cost tools to create printed P-OLEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.58-61
• /
• 2007

We present simulations and results to demonstrate the viability of stainless steel foil as a substrate for low power consumption, flexible AMOLED displays. Using organic planarization layers, we achieve very smooth surface properties, resulting in excellent TFT performance, that can be repetitively flexed without significantly affecting device performance. The use of phosphorescent OLEDs enables the design of low power consumption 40" AMOLED displays.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.314-316
• /
• 2006

In this paper, the plastic organic thin-film transistors (OTFTs) with $32{\ast}32$ array are presented. Flexible organic light emitting diodes (OLEDs) operated by OTFTs are fabricated with a novel lamination method and the results are also presented. OTFT pixels defined by photolithography, and pentacene deposited by thermal evaporation. Fabrication method and the performances of green PHOLEDs with high efficiency, stability, and electrical performance are discussed.