• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.963-966
• /
• 2002

This paper presents a new generic Petri net model for design and performance evaluation of a flexible assembly system with dual kanban. The architectural design of the model is derived from a generic bill of materials and the combination of FMS and FAS concepts. Two approaches for analysis and performance evaluation of the new model base on the theory of invariant analysis and linear programming are also introduced. Finally, the effect of different processing times between FMS-FAS on the number of kanban cards is investigated.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.04a
• /
• pp.115-118
• /
• 2001

An image processing method was applied to characterize a shape of the flexible grinding disk. A disk surface image was taken by CCD camera. Depth of cut was changed to be 2 and 4mm. Circles marked on the disk were captured to extract the key features of the deflection. Notable correlation has been observed between the intervals and the process conditions. Same methodology has been applied to check the symmetry of the human face. Tentative results revealed that symmetry could be checked using the filtered face image.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.508-513
• /
• 1990

오늘날, 생산성 증대와 품질 향상을 목적으로 산업용 로봇의 사용이 증대되면서 다양한 생산현장에서의 유연성과 적응성이 크게 요구되고 있는 실정이다. 그러나, 현재의 산업용 로봇은 end-effector의 dexterity의 부족으로 그 사용에 제한을 받고 있다. 이를 해결하기 위해 다지(multi-fingered), 다관절(articulated) 로봇손(robotic hands)의 도입이 필요하게 되었는데 이는 전체 로봇시스템의 능력과 유연성을 증가시킬 수 있을 것이다. 현재의 Flexible Manufacturing Workcell은 보통 한 대의 로봇팔과 많은 특수 용도의 고가의 tool로 구성되어 있으나 일반적인 모든 작업에 제한없이 모두 적용하기는 매우 어렵다. 그러므로, 다지, 다관절 로봇손의 개발 및 그 지능 제어의 실현은 작업에 따르는 불필요한 tool의 교환을 방지하여 비용과 시간을 절약함으로써 생산성을 극대화시킬 수 있다. 따라서, 본 연구에서는 Flexible Automation을 위한 다지, 다관절 로봇손의 설계 및 제작에 관한 방법을 제시하고자 한다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.309-314
• /
• 2004

A flexible disk grinding system process has been introduced that utilized varying disk orientation with respect to workpiece along with the applied feed speed. Various process conditions including cutting speed, maximum feed speed and orientation angles could applied to observe process outcomes. Even though continuous and constant feed speed has been applied to the process, the results from the trapezoidal input velocity profiles would be observed and compared. Based on the control strategies including neural network methodologies, several output results were compared to find the optimum process condition. Two axis control results were displayed showing better performance with higher trajectory error for larger training epoch.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.365-370
• /
• 2003

The problem of brake judder is typically caused by quality defects in manufacturing. This quality problem, however, can't be controlled deterministically and requires analyses and designs considering uncertainties. This paper presents a method for dynamic analysis of a brake judder considering uncertainties. Firstly, quality defects, which come from the uncertainties, are determined by examination of symptoms of the brake judder quality problem. Effective quality defects are selected by investigation of process capability and comparison of sensitivity of each quality defects and noise levels of the effective quality defects are determined. Secondly, flexible multibody dynamic analysis and finite element analysis according to the proposed method are carried out. Finally, The analysis results are compared with the test results with noise levels of the effective quality defects.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.616-619
• /
• 2005

OLED display are extremely sensitive to water and oxygen. Developing a thin film encapsulation for this technology has for a long time been elusive. Vitex has developed a multilayer barrier consisting of alternating inorganic and organic layers which can meet the requirements for a successful protection for such displays. In this paper we will discuss the basic process, the model, the results on top and bottom emission OLED displays as well as the application of Barix layers on plastic to create flexible OLED displays. We will show that for displays all the requirement for the telecommunication industry can be met and that the we can scale up to a mass manufacturing process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.673-675
• /
• 2005

Ink jet printheads are now widely used in manufacturing processes that require precise dispensing of materials. Today, Dimatix manufactures a variety of drop-on-demand ink jet printheads for the industrial printing market, but emerging opportunities present fresh challenges to our technology. In response to requirements for digitally printing on flexible substrates and dispensing novel electronic fluids, we are developing next generation jetting technology based on our three-dimensional silicon MEMS technology with a piezo-driven pumping chamber integrated into the chip structure. This presentation will address the functional and physical design features and properties of Dimatix's MEMS process, its characteristics, reliability and usability. Examples of opportunities and applications for digitally printing electronic fluids on flexible substrates with MEMS-based ink jet technology will be presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.632-632
• /
• 2013

We generated single-crystal organic nanowire arrays using a direct printing method (liquidbridge- mediated nanotransfer molding) that enables the simultaneous synthesis, alignment and patterning of nanowires from molecular ink solutions. Using this method, single-crystal organic nanowires can easily be synthesized by self-assembly and crystallization of organic molecules within the nanoscale channels of molds, and these nanowires can then be directly transferred to specific positions on substrates to generate nanowire arrays by a direct printing process. The position of the nanowires on complex structures is easy to adjust, because the mold is movable on the substrates before the polar liquid layer, which acts as an adhesive lubricant, is dried. Repeated application of the direct printing process can be used to produce organic nanowire-integrated electronics with twoor three-dimensional complex structures on large-area flexible substrates. This efficient manufacturing method is used to fabricate all-organic nanowire field-effect transistors that are integrated into device arrays and inverters on flexible plastic substrates.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.249-263
• /
• 1997

This paper addresses the parts route selection and economic design in flexible manufactuirng system (FMS). Parts are processed through several stage workstations according to operation sequences. The machine of each workstation can do multiple operation functions. And the operation stage of a part can be processed in several workstations, which are non-identical in functional performance. The objective of this paper is to determine the processing routes of parts, number of machine at each workstation, number of vehicle and makespan time. Two models are suggested. One is assumed that the operation stage of parts can be processed at the only one among several available workstations. Other is assumed that the operation stage of parts is allowed to be processed at several workstations. Parts are transported by automated guided vehicles (AGVs). The decision criteria is to minimize the sum of processing cost, travel cost, setup cost and overhead cost. The formulation of models is represented. A solution algorithm is suggested, and a numerical example is shown.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.275-285
• /
• 1995

In recent years there has been increasing interest in the issue of process centering in manufacturing process, The traditional process capability indices Cp, Cpk and Cpu are used to provide measure of process performance, but these indices do not represent the issue of process centering. A new measure of the process capability index Cpm is proposed that takes into account the proximity to the target value as well as the process variation when assessing process performance. However, Cpm only considers acceptance cost for deviation from target value within specification limits, do not includes economic consideration for rejected items. This paper proposes flexible process performance measures that considered quadratic loss function caused by quality deviation within specification limits, rejection cost associated with the disposition of rejected items, and inspection cost. In this model disposition of rejected items are considered under perfect corrective procedures and the absence of perfect corrective procedures.