• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.107-112
• /
• 2011

FFV(Flexible Fuel Vehicle) is the vehicle that can be used liberally from gasoline to E100(Ethanol 100%) for fuel. Recently, interest in the bio-fuel is increased by the environmental factors like exhaustion of the fossil fuel and ruduction of greenhouse gases. For the reason, adopting of FFV is activated in the world including North and South America. In general, bio-ethanol has highly corrosive substance in compare with gasoline. In the part of fuel system, corrosion can make a safety problem in case of fuel leakage and engine starting problem. So the fuel system of FFV have to be made of high corrosion-resistant materials. This study examined the effect of bio-ethanol on the durability properties according to component materials in FFV fuel pump motor and regulator using the High Temperature Fuel Circulation Test.

• 오토저널
• /
• 제14권6호
• /
• pp.67-73
• /
• 1992

This paper describes Hyundai's research and development work on a flexible fuel vehicle (FFV). The work on FFV has been conducted to evaluate its potential as an alternative to the conventional gasoline vehicle. Hyundai FFV described here can be operated on M85, gasoline, or any of their combinations, in which the methanol concentration is measured by an electrostatic type fuel sensor. For that operation, a special FFV ECU(Eletronic Control Unit) has been developed and incorporated in the FFV. The characteristics affecting FFV operation, such as FFV ECU control strategy and injector flow rate, have been investigated and optimized through the experiment. And various development tests have been performed in view of engine performance, durability, cold startability, and exhaust emissions reduction. The exhaust gas aftertreatment system consisting of manifold type catalyst and secondary air injection system shows good emission reduction performance including formaldehyde, and finally, the possibility of the FFVs as the low emission vehicles is evaluated by presenting NMOG(Non-Methane Organic Gases) levels with respect to M0 and M85. With these results, it is concluded that FFV can be a candidate for the low emission vehicles, but more works on its durability improvement is required.

• 오토저널
• /
• 제13권5호
• /
• pp.89-94
• /
• 1991

In the quantitative analysis of oxygenated exhaust emissions (unburned methanol, formal- dehyde) from methanol fueled vehicles, the oxygen contained in oxygenated exhaust gases lowers the FID (Flame Ionization Detector) response factor of conventional THC analyzer and leads to erroneous HC reading. For correct measurement of various HCs including oxygenated HCs emitted from FFV(Flexible Fuel Vehicle), first of all, the measurement technique of real HC emissions should be established. GC and HPLC-DNPH measuring methods specified by the EPA are used in this paper to analyze unburned methanol and formaldehyde components in the exhaust emissions. In emission test of FFV, unburned methanol and formaldehyde are emitted mostly during cold transient period, and it is shown that formaldehyde emission level is proportional to engine displacements. In view of the HC emission level, vehicle using M85 has 40% advantage over gasoline-fueled vehicle in OMHCE and has a good potential of a low emission vehicle.

• 오토저널
• /
• 제14권3호
• /
• pp.71-79
• /
• 1992

Recently, air pollution and energy security problems have necessitated the development of alternative fuel vehicles. As an alternative fuel vehicle FFV(Flexible Fuel Vehicle) which can be operated by and mixture between gasoline and M85(methanol 85% and gasoline 15% by vol. percent) has been drawing great attention. But poor cold startability of high methanol- content fuel which is characteristic of lower fuel volatility and higher latent heat of vaporization than gasoline is one of the major problems to be solved for the development of FFV. In this paper, important factors influencing cold startability of general S.I. engines are described. And, so-me cost-effective and practical methods were investigated in view of the optimization of fuel-ing parameters and ignition system for M85 fuel. The test results showed good startability up to (-22)-(-23).deg.C.

• 한국도로학회논문집
• /
• 제19권4호
• /
• pp.1-7
• /
• 2017

PURPOSES : This study aims to improve complex modeling of multivariable, nonlinear, and overdispersion data with an artificial neural network that has been a problem in the civil and transport sectors. METHODS: Deep learning, which is a technique employing artificial neural networks, was applied for developing a large bus fuel consumption model as a case study. Estimation characteristics and accuracy were compared with the results of conventional multiple regression modeling. RESULTS : The deep learning model remarkably improved estimation accuracy of regression modeling, from R-sq. 18.76% to 72.22%. In addition, it was very flexible in reflecting large variance and complex relationships between dependent and independent variables. CONCLUSIONS : Deep learning could be a new alternative that solves general problems inherent in conventional statistical methods and it is highly promising in planning and optimizing issues in the civil and transport sectors. Extended applications to other fields, such as pavement management, structure safety, operation of intelligent transport systems, and traffic noise estimation are highly recommended.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.283-290
• /
• 2019

In global competition manufacturing companies have to produce modern, new constructions from advanced materials in order to increase competitiveness. The aim of my research was to develop a new composite cellular plate structure, which can be primarily used for structural elements of road, rail, water and air transport vehicles (e.g. vehicle bodies, ship floors). The new structure is novel and innovative, because all materials of the components of the newly developed structure are composites (laminated Carbon Fiber Reinforced Plastic (CFRP) deck plates with pultruded Glass Fiber Reinforced Plastic (GFRP) stiffeners), furthermore combines the characteristics of sandwich and cellular plate structures. The material of the structure is much more advantageous than traditional steel materials, due mainly to its low density, resulting in weight savings, causing lower fuel consumption and less environmental damage. In the study the optimal construction of a given geometry of a structural element of a road truck trailer body was defined by single- and multi-objective optimization (minimal cost and weight). During the single-objective optimization the Flexible Tolerance Optimization method, while during the multi-objective optimization the Particle Swarm Optimization method were used. Seven design constraints were considered: maximum deflection of the structure, buckling of the composite plates, buckling of the stiffeners, stress in the composite plates, stress in the stiffeners, eigenfrequency of the structure, size constraint for design variables. It was confirmed that the developed structure can be used principally as structural elements of transport vehicles and unit load devices (containers) and can be applied also in building construction.

• 마이크로전자및패키징학회지
• /
• 제25권2호
• /
• pp.25-30
• /
• 2018

Sn-Pb솔더는 그동안 자동차 전장품에서 많이 사용되어 왔다. 그러나 최근에 환경과 인체에 대한 유해성 때문에 end-of-life vehicle (ELV)과 같은 국제 환경 규제로 인하여 Pb의 사용이 금지되었다. 이러한 이유로 자동차 전장품을 위한 Pb-free 솔더링에 관한 많은 연구들이 보고 되어 왔다. 한편, 자동차의 연료 효율성과 공간 활용을 위하여 유연성과 경량의 특성을 가지는 플렉시블 기판이 자동차 전장품에 사용되고 있다. 자동차 전장품에 대한 Pb-free 솔더 접합부 특성에 관한 연구들이 많이 진행되었음에도 불구하고 자동차의 사용 환경을 고려한 플렉시블 기판 솔더 접합부에 대한 신뢰성 특성에 관한 연구는 아직 부족한 실정이다. 본 연구에서는 organic solderability preservative (OSP) 및 electroless nickel immersion gold (ENIG) 표면처리 된 플렉시블 기판 위 Sn3.0Ag0.5Cu, Sn0.7Cu, Sn0.5Cu0.01Al(Si) 세 가지 Pb-free 솔더 접합부에 대한 특성을 보고 하였다. 솔더 조성과 기판 표면처리에 따른 접합부의 특성 및 신뢰성을 비교 평가 하기 위하여 인장 강도 시험, 열 충격 시험과 반복 굽힘 시험을 진행 하고 그 결과를 분석하였다. OSP 표면처리 된 기판 접합부에 대한 반복 굽힘 시험 결과 세 종류의 솔더 접합부 모두 파괴는 솔더 내부에서 일어 났으며 Sn3.0Ag0.5Cu 솔더의 접합부에서 반복 굽힘 수명이 가장 길게 나타났다.

• 자원ㆍ환경경제연구
• /
• 제30권2호
• /
• pp.237-268
• /
• 2021

에너지전환 정책의 가속화로 변동성 재생에너지가 가파르게 증가하면서 계통수용비용이 빠르게 상승하고 있다. 변동성 재생에너지 증가는 기존 전통적 발전자원의 이용률을 하락시켜서 전력공급에 비효율성을 가중시키는데 이에 대한 해결책으로 수요자원이 주목받고 있다. 본 연구에서는 수요자원 중 큰 잠재력을 가지고 있는 전기차 수요가 재생발전에 대한 유연성 자원으로 활용될 경우 전력공급비용을 얼마나 경감시킬 수 있는지 9차 전력수급계획을 반영하여 분석하였다. 분석모형으로 재생발전의 확률적 특성을 사실적으로 반영할 수 있는 확률적 전력시스템 최적화 모형을 적용해서 재생에너지가 유발하는 비용과 전기차 수요자원의 편익을 분석하였다. 분석결과 계시별 요금제보다 가상발전소 기반의 직접제어방식이 편익이 더 높고, 발전구성에서 재생에너지의 비중이 높아질수록 편익이 더 높아지는 것으로 나타났다. 전기차 수요자원의 구현비용인 중개사업자 수수료와 배터리마모비용을 고려한 순편익 추정결과, 충방전이 가능한 가상발전소 방식의 경우 월평균 운행비용의 67~85% 수준으로 나타났다. 이러한 수요자원 순편익이 소비자에게 효과적으로 분배되는 요금체계가 적용될 경우 시장참여유인이 높을 것으로 추정된다.