• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.8
• /
• pp.1242-1252
• /
• 2006

Many applications in computer graphics require complex, highly detailed models. However, to control processing time, it is often desirable to use approximations in place of excessively detailed models. Therefore, we have developed the notion of an optimal matrix to simplify the model surface which can then rapidly obtain high quality 2D patterns by flattening the 3D surface. Firstly, the woman's 3D body was modeled based on Size Korea data. Secondly, the 3D model was divided by shell and block for the pattern draft. Thirdly, each block was flattened by the grid and bridge method. Finally, we select the optimal matrix and demonstrate it's efficiency and quality. The proposed approach accommodates surfaces with darts, which are commonly utilized in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. This can facilitate much better approximations, in both efficiency and exactness.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.23 no.4
• /
• pp.351-365
• /
• 2019

This article presents a new approach for conformal flattening with optimal cone singularity. The algorithm here takes an optimal control for selecting optimal cones and uses the Ricci flow to force the flattening. This work is considered as a modification to the work of Soliman et al. [1] in the sense that they make use of the Yamabe equation for the flattening, which is an approximation of the Ricci flow. We present a numerical algorithm based on the optimal control with the mathematical background. Several numerical results validate that our method is optimal in total cone angle and usage of the Ricci flow ensures the conformal flattening while selecting optimal cones.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.310-314
• /
• 2002

The exact pitch (fundamental frequency) extraction is important in speech signal processing like speech recognition, speech analysis and synthesis. However the exact pitch extraction from speech signal is very difficult due to the effect of formant and transitional amplitude. So in this paper, the pitch is detected after the elimination of formant ingredients by flattening the spectrum in frequency region. The effect of the transition and change of phoneme is low in frequency region. In this paper we proposed the new flattening method of log spectrum and the performance was compared with LPC method and Cepstrum method. The results show the proposed method is better than conventional method.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.665-670
• /
• 2002

The most common form of pre-emphasis is y(n)=s(n)-As(n-1), where A typically lies between 0.9 and 1.0 in voiced signal. Also, this value reflects the degree of pre-emphasis and equals R(1)/R(0) in conventional method. This paper proposes a new flattening method to compensate the weaked high frequency components that occur by vocal cord characteristic. We used interval information of LSP to estimate formant frequency, After obtaining the value of slope and inverse slope using linear interpolation among formant frequency, flattening process is followed. Experimental results show that the proposed method flattened the weaked high frequency components effectively. That is, we could improve the flattening characteristics by using interval information of LSP as flattening factor at the process that compensates weaked high frequency components.

• Speech Sciences
• /
• v.12 no.4
• /
• pp.43-52
• /
• 2005

The common form of pre-emphasis filter is $H(z)\;=\;1\;- az^{-1}$, where a typically lies between 0.9 and 1.0 in voiced signal. Also, this value reflects the degree of filter and equals R(1)/R(0) in Auto-correlation method. This paper proposes a new flattening algorithm to compensate the weaked high frequency components that occur by vocal cord characteristic. We used interval information of LSP to estimate formant frequency. After obtaining the value of slope and inverse slope using linear interpolation among formant frequency, flattening process is followed. Experimental results show that the proposed algorithm flattened the weaked high frequency components effectively. That is, we could improve the flattened characteristics by using interval information of LSP as flattening factor at the process that compensates weaked high frequency components.

• KSTLE International Journal
• /
• v.6 no.1
• /
• pp.21-27
• /
• 2005

A technique for a wear volume calculation is improved and verified in this research. The wear profile data measured by a surface roughness tester is used. The present technique uses a data flattening, the FFT and the windowing procedure, which is used for a general signal processing. The measured value of an average roughness of an unworn surfnce is used for the baseline of the integration for the volume calculation. The improvements from the previous technique are the procedures of the data flattening and the determination of a baseline. It is found that the flattening procedure efnciently manipulates the raw data when the levels of it are not horizontal, which enables us to calculate the volume reasonably well and readily. By comparing it with the weight loss method by using artificial dents, the present method reveals more volume by aroung 3~10%. It is attributed to the protruded region of the specimen and the inaccuracy and data averaging during the weght loss measurement. From a thorough investigation, it is concluded that the present technique can provide an accurate wear volume.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3558-3562
• /
• 2010

The exact fundamental frequency (pitch) extraction is important in speech signal processing. However the exact pitch extraction from speech signal is very difficult due to the effect of formant and transitional amplitude. So in this paper, the pitch is detected after flattening the spectrum in frequency region by proposed algorithm for minimized harmonics variance value. Experimental result showed the proposed method appeared an outstanding performance in compared with LPC, Cepstrum. Also, the results show the proposed method is better than conventional method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.5
• /
• pp.907-912
• /
• 2006

Pre-emphasizing the speech compensates for falloff at high frequencies. The most common form of pre-emphasis is y(n)=s(n)-A${\cdot}$s(n-1), where A typically lies between 0.9 and 1.0 in voiced signal. And, this value reflects the degree of pre-emphasis and equals R(1)/R(0) in conventional method. This paper proposes a new flattening method to compensate the weaked high frequency components that occur by vocal cord characteristic. We used QMF(Quardrature Mirror Filter) to minimize the output signal distortion. After using the QMF to compensate high frequency components, flattening process is followed by R(1)/R(0) at each frame. Experimental results show that the proposed method flattened the weaked high frequency components effectively than auto correlation method. Therefore, the flattening algorithm will apply in speech signal processing like speech recognition, speech analysis and synthesis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.12
• /
• pp.1825-1836
• /
• 2008

Many applications in computer graphics require complex and highly detailed models. However it is often desirable to use approximations in place of excessively detailed models in order to control the processing time. Thus, we aim to develop a notion of optimal matrix to simplify surface which can rapidly obtain the high quality 2D patterns flattening 3D surface as follows. Firstly, two 3D bodies are modeled based on existing Size Korea data. Secondly, each model is divided by shell and block for its pattern draft. Thirdly, each block is flattened by grid and bridge method. Finally, we selected the optimal matrix and demonstrated the efficiency and quality of the proposed method. This proposed approach accommodates surfaces with darts, which are commonly used in the clothing industry to reduce the deformation of surface forming and flattening. The resulting optimal matrix could be an initiation of standardization for pattern flattening. It is expected that this method could facilitate much better approximation in both efficiency and precision.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1C
• /
• pp.9-17
• /
• 2004

We present a performance improvement of Binary CDMA by flattening the correlation values. A Binary CDMA system, in which multi-leveled transmission signal of multi-code CDMA is clipped into a binary value, is cost-efficient since the strict linearity of the power amplifier is relieved. However, a loss of orthogonality among user channels due to the clipping causes the correlation values at the receiver to have a random distribution. If the correlation value for even a single channel goes too low, the average BER drops considerably. We developed a method of correlation flattening, where the binary chip pattern at the transmitter is adjusted so that the correlation values have averaged magnitude. Experimental results on several spreading codes show that the correlation flattening method increases the number of available channels at reduced BER.