• 비파괴검사학회지
• /
• 제28권5호
• /
• pp.416-420
• /
• 2008

전자기음향변환기 분야에서는 나선형 RF 코일이 솔레노이드 코일보다 훨씬 널리 사용되고 있다. 그러나 실린더 구조물의 원거리 초음파검사용 자왜 스트립 도파변환기 분야에서는 솔레노이드 코일이 주로 사용되어왔다. 이는 아마도 낮은 주파수의(즉, 치수가 큰) 나선형 코일의 제작의 어려움에 기인하는 것 같다. 본 논문에서는 FFC(flexible flat cable)로 나선형 코일 자왜 스트립 도파변환기를 제작하는 방법을 기술한다. 기존의 솔레노이드 코일 변환기와의 비교실험을 통하여 나선형 코일 변환기가 훨씬 우수한 성능(감도, 신호-대-잡음 비, 도파방향조정능력)을 갖는다는 것을 실증한다.

• 한국항행학회논문지
• /
• 제22권2호
• /
• pp.148-153
• /
• 2018

본 논문에서는 복수 수신기에 전력을 전송하기 위한 SIMO (single-input multiple-output) 자기공진방식 무선전력전송 시스템을 제안하고, 이에 따른 시뮬레이션 및 측정결과를 제시하였다. 지름 600 mm 의 송신 단일루프 및 송신 헬리컬 공진 코일, 외경 900 mm 스파이럴 수신 공진 코일을 사용하고, $80{\times}60mm^2$ 평판 사각 코일을 수신으로 활용하여 600mm 떨어진 테이블 형태 구조로 무선전력전송 시스템을 구성하였다. 최적의 특성을 위해 무선전력전송 코일을 설계하고 3차원 전자계해석 및 등가회로 해석 시뮬레이션을 진행하고 이를 제작하여 전송 특성을 측정하였다. 스파이럴 공진코일의 중심부에서 거리에 따른 효율변화를 해석하였으며, 구성한 시스템의 측정결과 수신기가 1개일 경우의 효율은 57 % 이며, 2개로 수신될 경우 각각 37 %의 전송 효율을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1154-1156
• /
• 1999

This paper presents the novel fabrication of an electromagnetic micro actuator with a corrugated diaphragm and a flat one. The actuator consists of a Parylene diaphragm with a spiral copper coil and a permanent magnet. The cower coil is fabricated by electroplating and patterning. As the further works, the frequency response of the actuator are obtained by using a laser vibrometer and the static deflection of the actuator diaphragm are measure by using laser displacement meter. The corrugated diaphragm is expected to be better than the flat one with respect to the actuator performance.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.78-83
• /
• 2019

In this study, we analyze the structure of the transceiver coil in the inductive power transfer (IPT) system. In the IPT system, the transceiver coil design needs to have the highest magnetic coupling possible because of the relatively low magnetic coupling due to the large gap of distance without the core. The transmitting coil may be formed as a multi-layer type according to the distance between the transmitting and receiving coils if the receiving coil is configured as a multi-layer type on the inner structure of the receiving apparatus, thereby improving the magnetic coupling and system efficiency. We compare and analyze the coil magnetic coupling, and system efficiency according to the layer structure of the transmitting and receiving coils and verify the analysis by JMAG simulation. Experimental results show that the layer structure of the transceiver should be considered according to the inner space of the receiving device and the spacing distance.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.73-80
• /
• 2020

The 3D printing of electronics has been a major application topics in additive manufacturing technology for a decade. In this paper, wireless power transfer (WPT) technology for 3D electronics is studied to supply electric power to its inner circuit. The principle of WPT is that electric power is induced at the recipient antenna coil under an alternating magnetic field. Importantly, the efficiency of WPT does rely on the design of the antenna coil shape. In 3D printed electronics, a flat antenna that can be placed on the printed plane within a layer of a 3D printed part is used, but provided a different antenna response compared to that of a conventional PCB antenna for NFC. This paper investigates the WPT response characteristics of a WPT antenna for 3D printed electronics associated with changes in its design elements. The effects of changing the antenna curvature and the gap between the wires were analyzed through experimental tests.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.809-810
• /
• 2006

Reduction of AC losses is very important for realizing HTS cable and it had been reported that the same layer current controlled by twisting pitch and direction could reduce the AC losses effectively. During the long-term development of HTS cables, the superconductor AC losses will need to be reduced to a level determined by the economics of each installation and the efficiency of the refrigeration. Theoretical models have been developed to predict the magnitude of the losses in cables composed of several layers of flat HTS tapes. This paper is manufactured mini-model HTS cable and voltage signal line to spiral shape. Mini-model HTS cable is composed of 13 HTS tape. We measured to critical current and AC loss and compared used lock-in-amp to cancel coil. This data is useful to HTS cable of DAPAS program.