• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1352-1358
• /
• 2004

The mechanical spring is one of widely used machine elements. Among various kinds, flat-type spring loaded by a rotating pin was studied. A flat spring was simplified to a cantilever beam, and numerical analysis was attempted. Since the loading pin rotates about a separate axis from the fixed spring or vice versa, the location, direction, and magnitude of the contact force including normal contact and friction loads vary accordingly. Meanwhile, the spring is deformed substantially as the relative motion progresses. Therefore, this problem needs to be formulated taking the follower loading characteristics and geometrical non-linearity into account. Derived nonlinear differential equation was solved to yield the spring deflection, contact force and the torque to rotate the pin, and the result was compared with a finite element solution. Also, the influences of principal design parameters were studied. The proposed methodology is expected to be useful for the design of pin-loaded flat spring and the prevention of mechanical failures in the form of yielding or fatigue failure of spring or severe wear of the components.

• Structural Engineering and Mechanics
• /
• 제53권5호
• /
• pp.1051-1066
• /
• 2015

The study aims on the effect of material dependency in elastic- plastic contact models by contact analysis of sphere and flat contact model and wheel rail contact model by considering the material properties without friction. The various materials are selected for the analysis based on Young's modulus and yield strength ratio (E/Y). The simulation software 'ANSYS' is employed for this study. The sphere and flat contact model is considered as a flattening model, the stress and strain for different materials are estimated. The simulation of wheel-rail contact model is also performed and the results are compared with the flattening model. The comparative study has also been extended for finding out the mean contact pressure for different materials the E/Y values between 150 and 660. The results show that the elastic-plastic contact analysis for materials up to E/Y=296.6 is depend on the nature of material properties and also for this material the mean contact pressure to yield strength reaches 2.65.

• Tribology and Lubricants
• /
• 제14권1호
• /
• pp.54-63
• /
• 1998

In many practical lubricated contacts such as a rough concentrated contact on the sliding of nominally flat surfaces, the fluid may be of molecular (nanometer) scale owing to the asperity interactions on the surfaces. Under this condition, there is insufficient lubricant on the concentrated contact spot to maintain a realistic continuum. Rheological behavior for this kind of concentrated contact has been studied extensively to know whether the application of viscous fluid model is appropriate. The interaction of two rough surfaces is simplified as perfectly flat-rough surfaces contact under certain conditions by "composite topography" and for a nanometer scale fluid film, three kinds of rheological fluid behavior are analyzed in elastohydrodynamic asperity point contact.t contact.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.173-182
• /
• 1997

In many practical lubricated contacts such as a rough concentrated contact on the sliding of nominally flat surfaces, the fluid may be of molecular (nanometer) scale owing to the asperity interactions on the surfaces. Under this condition, there is insufficient lubricant on the concentrated contact spot to maintain a realistic continuum. Rheological behavior for this kind of concentrated contact was studied to know whether the application of viscous fluid model is appropriate. The interaction of two rough surfaces is simplified as perfectly flat-rough surfaces contact under certain conditions by "composite topography" and for a nanometer scale fluid film, three kinds of rheological fluid behavior are analyzed in elastohydrodynamic asperity point contact.t contact.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.554-570
• /
• 1990

본 연구에서는 동적인 상태에서 구름접촉 거동을 좀더 명확히 하기 위해서 마 찰의 발생기구가 탄성이력손실에 기인한다는 이론을 기초로 압축 코일스프링을 이용한 감쇠자유진동시스템으로 구성된 실험장치에 의해서 구의 직경, 수직하중, 평면만의 표 면거칠기를 변화시켜 구름접촉면의 감쇠특성을 검토하고 이로부터 구름마찰력과 대수 감쇠율을 구한 다음 대수감쇠율과 진폭의 관계를 이용해서 실험에 의한 새로운 접촉폭 산출방법을 제시하고 Hertz이론에 의한 접촉폭과 마찰이론의 역학적 해석에 의한 접촉 폭과 비교, 분석해 보았다.

• 한국가스학회지
• /
• 제11권1호
• /
• pp.34-39
• /
• 2007

본 본문에서는 LPG 용기용 밸브의 개폐과정에서 발생하는 밸브패킹과 밸브시트의 상대접촉 마찰작용에 따른 밀봉성에 대한 FEM 해석결과를 제시하고 있다. 개폐용 밸브의 밀봉작용은 나일론-66으로 제조한 디스크 형상의 밸브패킹이 원형 파이프의 밸브시트 단면을 막아 LP 가스의 외부 송출을 차단하면서 완료된다. 밸브패킹은 밸브시트에 대하여 평면으로 접촉밀봉을 하는 경우와 원형홈의 둥근접촉 형상에 대한 밀봉 압착력을 확보하는 두 가지가 있다. FEM 해석 및 실험적 연구결과에 의하면, 밸브패킹을 사용하기 이전의 평면접촉 밀봉 작용력은 4.9 MPa로 높지만, 밸브를 사용한 이후의 원형홈 접촉 밀봉력은 4.4 MPa로 약간 낮게 나타났다. 그러나 이들 최대응력은 나일론 소재의 항복응력 83 MPa에 비하여 대단히 낮은 값이기 때문에 현재의 개폐밸브용 패킹은 과도하게 설계되었다 할 수 있다.

• 소성∙가공
• /
• 제20권2호
• /
• pp.99-103
• /
• 2011

Many parameters influence the frictional behavior of steel sheet during stamping. The contact pressure between a die and a sheet during stamping is one of them. Thus, this parameter is investigated for high strength steel (HSS) sheets, which are widely used for auto body panels due to their potential for weight reduction. Since HSS extend the limits of contact pressure for mild steel, the effect of this parameter on friction cannot be ignored. To investigate the influence of contact pressure on the frictional behavior of steel sheets, a flat type of friction test was conducted on three different steel sheets under various contact pressures. For bare steel sheets, the curve representing the relationship between contact pressure and friction coefficient exhibits a U shape. Coated steel sheets show a similar tendency except at low contact pressure. For these materials, when the contact pressure is very low, the friction coefficient slightly increases with pressure before it starts to decrease. The test results show that the effect of contact pressure on frictional behavior of steel sheet is not negligible even for contact pressures that are lower than the strength of HSS sheet.

• Journal of applied mathematics & informatics
• /
• 제9권1호
• /
• pp.441-447
• /
• 2002

We show that the conharmonical1y flat K-contact find cosymplectic manifolds are local1y Euclidean. Evidently non locally Euclidean conharmonically flat Sasakian manifold does not exist. Moreover we see that conharmonically flat Kenmotsu manifold does not exist and conharmonically flat fibred quasi quasi Sasakian space is locally Euclidean if and only if the scalar curvature of each fibre vanishes identically.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.103-108
• /
• 2009

The droplet impact and merging process on a flat substrate with contact angle hysteresis is numerically studied. The droplet deformation is determined by an improved level-set method employing a sharp-interface technique for the stress condition at the liquid-gas interface and the contact angle condition at the liquid-gas-solid interline. Based on the computations, the droplet impact and merging pattern is investigated to find the optimal condition in manufacturing a micro-line. The effects of dynamic contact angles and droplet spacing on droplet motion are quantified.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.79-83
• /
• 2010

Recently, the flat wiper which is one piece wiper and subjected to a pressing force at a single center point is gaining wide applications on automotive windshields. However, nonuniform reactive pressure distributions takes place, so that wiping is not completed at such locations. The wiping performance of the flat wiper is best when a wiper and a curved windshield have perfect contact without gaps under the specified pressing force of 13 ~ 15 gf/cm. Therefore, it is necessary that the realistic curvature equation of a wiper spring-rail should be obtained. Finite element analysis, CATIA script-macro function, and the least square method were utilized to find out the curvature of a spring-rail for a perfect contact with a windshield under a specified concentrated load. The curvature equation became the third order polynomial.