• 대한기계학회논문집
• /
• 제8권1호
• /
• pp.1-9
• /
• 1984

In the utilization of solar energy most often a flat solar collector is used for solar heating, system. Since solar energy is absorbed through this solar collector, it is considered to be a most important part in the whole solar heating system. The purpose of the present investigation is to evaluate the influence of varying design parameters for thermal performances of flat-plate solar collector. By analysing these parameters, optimum design of solar collector would become possible. Specification of the existing solar collector are utilized in calculation as a starting point. Analysis is carried out numerically for "Unit Solar Collector" which is composed of fin and tube. Among design parameters. such parameters as mass flow rate per unit area, tube spacing and fin thickness are selected as variables in the computer simulation model. Results are presented for thermal performances of flat-plate solar collector for each important design parameters, so that predictions become possible through numerical analysis without performing experiments whenever it is required. required.

• 한국생활과학회지
• /
• 제8권2호
• /
• pp.289-299
• /
• 1999

The purpose of this study was to develop slacks pattern for obesity women through comparing the flat pattern with the draping pattern. The results were as follows: 1. In the result of the comparative investigation on pattern and sensory evaluation, it was found that the draping pattern had better comfort and appearance. Especially, as the lower part of the body is more obese and the expansion ratio of the body is higher, the draping pattern was superior to the flat pattern in the sensory evaluation. 2. In the result of sensory evaluation, it was found that the proper ease of total crotch length was $2{\sim}3%$ of actual total crotch length.

• 대한전자공학회논문지TC
• /
• 제41권2호
• /
• pp.41-51
• /
• 2004

본 논문에서는 IMT-2000 기지국용 빔 조향 다이폴 위상배열 안테나 시스템을 설계하였다. 본 논문에서 설계한 빔 조향 다이폴 위상배열 안테나 시스템은 크게 안테나부와 빔 조향 제어부로 구성된다. 안테나부는 광대역 특성을 위해 기본 복사소자로 평판형 다이폴을 제안하고, 설계하였으며, 지향성 복사패턴을 위해 평판형 다이폴을 8×8로 배열하였다. 또한 다이폴 수직배열 8소자 전력분포를 위한 수직 전력 분배기를 설계하였다. 빔 조향 제어부에서는 다이폴 수평배열 8소자 전력분포를 위한 수평 전력 분배기와, 수평방향(7방향)에 빔 틸트를 위한 4비트 위상 변위기와 구동회로를 설계하였다. 설계된 안테나 시스템의 성능을 평가하기 위해 실제 제작하고 복사특성을 측정하였다. 측정견과 각 제어신호에 따라 수평 빔 틸트가 일어남을 확인할 수 있었으며, 측정된 복사특성은 설계목표에 거의 근접한 것으로 나타났다.

• Design & Manufacturing
• /
• 제6권1호
• /
• pp.67-72
• /
• 2012

Most of the plastics products have been manufactured by injection molding. Molding trouble in injection-molded parts is caused by changing a molding product and molding process condition, etc. In this study, warpage in the injection molded part have been studied. Specimens are rectangular flat shape with and without ribs. Non-crystalline resins (ABS+GF30%, PC+GF30%) and crystalline resins (PP+GF30%, PA66+GF30%) were used for material. Flat shape ribs showed higher warpage than flat shape without rib by 10 to 41%. the specimens with ribs that are located parallel to flow direction has higher warpage than the specimens with rib that are located perpendicular to flow direction by 11 to 50%. crystalline resins have higher warpage than non-crystalline resins by 22 to 78%. Warpage decreases as packing time increases as injection temperature increases.

• 복식
• /
• 제56권2호
• /
• pp.101-111
• /
• 2006

The purpose of this research is to define body shapes of Plus-sized women at ages between 21 and 69 whose satisfied the Plus-sized judgment criteria took part in this study. This research also classifies different body types, and provides basic data for designing prototypes according to each body type. Based on factor analysis of the measured data, nine key factors are grouped. And four different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall and characterized by 'Y' body shape when looked from the front. Looking from the side, this type is comparatively balanced obese type which has flat breast and abdomen, and which has a jutting back and buttocks. Type 2 refers to those who are the shortest of all the obese with 'X' front. This type is Sway-back shape which has jutting back and abdomen but flat buttocks when looked from the side. Type 3 is characterized by 'H' body shape when looked from the front. This type is Pway-back shape which has flat back, abdomen and buttocks when looked from the side. The prominent breast part of this type is the most outstanding figure. Type 4 is characterized by 'X' when looked from the front. This type has a jutting waist and prominent buttocks when looked from the side.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.21.1-21.3
• /
• 2019

Background: Treatment planning the correction of a transverse maxillary occlusal plane cant often involves a degree of qualitative "eyeballing", with the attendant possibility of error in the estimated judgement. A simple chair side technique permits quantification of the extent of asymmetry and thereby quantitative measurements for the correction of the occlusal plane cant. Methods: A measuring instrument may be constructed by soldering the edge of a stainless steel dental ruler at 90° to the flat surface of a similar ruler. With the patient either standing in natural head position, or alternatively seated upright in the dental chair, and a dental photographic retractor in situ, the flat under-surface of the horizontal part of this measuring instrument is placed on a unilateral segment of a bilateral structure, e.g. the higher maxillary canine orthodontic bracket hook. The vertical ruler is held next to the contralateral canine tooth, and the vertical distance measured directly from the canine bracket to the flat under-surface of the horizontal part of the measuring instrument. Results: This vertical distance quantifies the overall extent of movement required to level the maxillary occlusal plane. Conclusions: This measuring instrument and simple chair side technique helps to quantify the overall extent of surgical levelling required and may be a useful additional technique in our clinical diagnostic armamentarium.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권1호
• /
• pp.195-211
• /
• 2015

Flat plate friction lines have been used in the process to estimate speed performance of full-scale ships in model tests. The results of the previous studies showed considerable differences in determining form factors depending on changes in plate friction lines and Reynolds numbers. These differences had a great influence on estimation of speed performance of full-scale ships. This study was conducted in two parts. In the first part, the scale effect of the form factor depending on change in the Reynolds number was studied based on CFD, in connection with three kinds of friction resistance curves: the ITTC-1957, the curve proposed by Grigson (1993; 1996), and the curve developed by Katsui et al. (2005). In the second part, change in the form factor by three kinds of friction resistance curves was investtigated based on model tests, and then the brake power and the revolution that were finally determined by expansion processes of full-scale ships. When three kinds of friction resistance curves were applied to each kind of ships, these were investigated: differences between resistance and self-propulsion components induced in the expansion processes of full-scale ships, correlation of effects between these components, and tendency of each kind of ships. Finally, what friction resistance curve was well consistent with results of test operation was examined per each kind of ships.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.996-1002
• /
• 2013

This study addresses the development of a full duplex robotic system for transferring flat-panel display glass. We propose to accomplish this using a bidirectional linear transfer mechanism in place of the conventional rotary transfer mechanism. The developed full duplex robot comprises a driving part that carries the glass panel laterally, vertical part that can be moved up and down by means of a ball screw and linear motion guide arrangement, and hand part that slides by the cylinder of the driving part along the guide rail with a V-guide bearing attached to the bottom of the support. In addition, an alignment part prevents the hand part from derailing and holds the hand part while the driving part moves horizontally. The full duplex robot lifts and drives a glass panel directly while transferring it to the buffer and does not require rotational motion. Therefore, both transferring and stacking are realized with a single device. This device can be used in existing industrial facilities as an alternative to existing industrial robots in current as well as future process lines. The proposed full duplex robot is expected to save considerable amounts of time and space, and increase product throughput.

• 한국습지학회지
• /
• 제14권3호
• /
• pp.375-384
• /
• 2012

강화 갯벌의 퇴적작용은 주변의 대규모 건설로 인하여 지난 20여년 동안 변화되어 왔다. 강화 갯벌 동부와 염하수로 하류에 위치한 동검 갯벌의 퇴적환경은 조류와 하구 순환의 변화에 의하여 영향을 받았다. 그 결과 동검 갯벌에 급격한 퇴적이 일어났다. 두 개의 코어 퇴적물 상부에 나타나는 실트-점토 호층 엽리 실트 퇴적상은 동검 갯벌에서 상대적으로 많은 퇴적이 있었음을 나타냈다. $^{210}Pb$ 분석에 의한 두 개 코어 시료의 퇴적률은 정점3에서 3.25cm/year와 정점 5에서 3.47cm/year 였다. 그러나 2010년부터 2012년까지의 단기 퇴적률은 대부분 1cm/year 미만으로 상대적으로 낮은 비율의 퇴적을 나타내고 있었다. 결과적으로, 동검 갯벌의 퇴적물은 2000년대에 인공구조물 건설에 의하여 급격히 퇴적되었다. 현재 동검 갯벌의 고도 증가는 계절 변화를 가진 상대적으로 낮은 퇴적률을 보여 주고 있다.

• 한국지형학회지
• /
• 제25권1호
• /
• pp.31-45
• /
• 2018

This study investigated the characteristics of sedimentary environment changes across a tidal flat in Gagyeongju of Anmyeondo Island. We performed a spatio-temporal analysis on the grain sizes composition of sediments and micro-landform changes during the winter from 2013 to 2016. The results showed that erosion was a dominant processthroughout the study flat, reducing the surface elevation even by 1 m around the upper sand flat. As a consequence, headlands have formed in the entire region of Gagyeongju village. In addition, erosion quickly progressed along the low-lying subtidal zone and tide way and, in contrast, sedimentation progressed in the mid-elevation tidal flat. We posit that a jetty, which had been constructed as a pier facility on the eastern part of the study area, interfered with the flow of tidal current, thereby enhancing these erosional processes. This is because such interference can block the supply of fine-textured sediments from the nearby Cheonsu Bay and therefore reduce surface elevation. According to the surface sediment analysis, the sediments were categorized into 7 sedimentary facies, and generally displayed a high ratio of silt and clay. The result of time-series analysis (2012-2013) showed that the sediments on the tidal flat became fine-grained, and that sorting became worse. However, the sediments on the subtidal zone, embayment and along inside of the jetty tended to be coarse-grained. In conclusion, the tidal flat microlandform change in the study area was caused by a disruption in the seawater circulation due to the jittery construction within the tidal flat, which had a direct effect on erosional and sedimentary environment processes.