• Economic and Environmental Geology
• /
• v.24 no.4
• /
• pp.409-419
• /
• 1991

A gravity survey was conducted in the western Marquette district, Michigan, to delineate the subsurface structure and the relationship of the Proterozoic Marquette Range Supergroup rocks (Precambrian X) and Archean basement (Precambrian W) where the Republic, Michigan River, and Marquette troughs join. In order to accomplish these purposes, three hundred and forty gravity stations were established in the area of $380km^2$. Positive anomalies are associated with the Precambria X, metasedimentary sequence which has a higer density with respect to the Precambrian W, basement rocks. The dominant positive gravity anomalies follow the axes of the three troughs which are filled with Precambrian X rocks. Subsurface structure was modelled by using the Talwani method. Gravity model studies indicate that the Marquette trough is asymetrically shaped and steeply dipping at the north edge except in the eastern part of the study area. The interpretive results obtained from two dimensional model studies suggest that the basement structure of the study area is relatively flat, and that the troughs were formed contemporaneously.

• Journal of Energy Engineering
• /
• v.2 no.2
• /
• pp.179-186
• /
• 1993

Heat pipes. applied to a flat plate solar collector, have a long and slender configuration with relatively low heat flux in the evaporator section. Such a heat pipe has a tendency to build-up a liquid pool at the lower part of the evaporator section. and at this pool occurs such complicated phenomena of evaporation and fluid dynamics as superheat, sudden generation of bubble, its likely explosive growth process and flooding, etc. In the present study. we tried to solve these problems by means of adjusting two principal design parameters, the liquid inventory and the installation region of the wick, using 4 heat pipes and 3 thermospheres. The corresponding results can be summarized as follows$\^$1)/. The effective thermal conductances of the heat pipe was greatly improved by eliminating the wick in the adiabatic and condenser sections$\^$2)/. The liquid inventory should be increased by about 40% larger than what is saturated the wick$\^$3)/. In the evaporator section the wick has a favorable effect to reduce both unstable operation by intermittent occurrence of nucleate boiling and response time at the initial start-up process.

• Journal of Welding and Joining
• /
• v.15 no.3
• /
• pp.88-98
• /
• 1997

Welding defects, such as porosity and spike, have sometimes occurred in deep penetration electron beam welds. These defects are known to be one of the serious problem in electron beam welds. So, effects of active parameters ($a_b$) on bead shape and occurrence of defects in electron beam welds of heavy section 9%Ni steel plates were investigated. Partial penetration welding in flat position, and deep penetration welding of 10 ~ 28mm depth were investigated in this study. It is desirable to select low accelerating voltage and above the surface focus position $a_b$$\geq$1.2 at which a wine-cup shaped bead is obtained to avoid the welding defects such as spike and root porosity. When the accelerating voltage of electron beam was low (90kV), active parameter ($a_b$) did not influence on the bead width, penetration depth and weld defects significantly. However, in case of high voltage ($\geq$120kV), active parameter ($a_b$) was sensitively associated with penetraton depth and weld defects, i.e. when the active parameter (($a_b$) was in the range of 0.6 to 1.0, the depth of penetration was always over the target (23mm), while the depth of penetration was dramatically decreased with further increase of active parameter ($a_b$). The weld defects were decreased with the increase of active parameter $a_b$ resulting in the decrease of energy density of the focused beam in the root part of fusion zone.

• Journal of architectural history
• /
• v.26 no.3
• /
• pp.39-49
• /
• 2017

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

• Journal of the Korea Convergence Society
• /
• v.9 no.10
• /
• pp.229-235
• /
• 2018

The Hanok church is an important cultural heritage that can be considered from a religious point of view of life in the modern age in Korea. We will investigate the bounadaries of the Hanok church built in modern age and the characteristics of Hanok architectural. To do so, we have conducted field trips, interviews, and repair reports of the Gimje Geumsan Church in the Jeollabuk province. The Geumsan Church is present, and the architectural characteristics can be confirmed in detail. In addition, Yugwang School, which was responsible for the education function, was able to guess the location and size through the data. As a result, the boundaries of Geumsan Church is the present fence, the west side has the building, and the east side has the playground. The Geumsan Church's flat form was divided into male and female according to the space configuration of ㄱ-shaped reflecting Confucian thought of the time. And it seems that the Yugwang school was located in the entrance part of the modern church with a two-frame scale, which is suitable for lecture.

• Fashion & Textile Research Journal
• /
• v.7 no.3
• /
• pp.301-308
• /
• 2005

The purpose of this study is to design men's clothing pattern that supplemented the problems of body shapes, by grasping the physical characteristics of middle-aged men and classifying their body shapes through comparing measurements after carrying out the human-body measurement targeting 120 middle-aged men at the age of 35-49 in full. As to the technical-statistic analysis of the measurement items, it could be seen that the middle-aged people who are the research target, have the obese body shapes. As a result of carrying out the factor analysis by the measurement analysis, it was derived the totally five factors such as thickness and width, stature and height, weight and girth, the bust length, and the shoulder shape. The total communality is 78.47%, and as a result of the cluster analysis by the factor score, it was classified into three clusters. Type 1 is the body shape with the great stature, the waist region a little obese, and the biggest thickness, width and girth. It is a flat body shape with the narrow shoulder and the smallest difference between the breast width and the waist width. As type 2 is the body shape that is small stature and is relatively not fat, it is the shape with the biggest difference between the breast width and the waist width and with the wide shoulder. Type 3 is the body shape that belongs to the middle of type 1 and type 2, has the upper-part body longer than other body shapes, and has the developed breast region with the biggest bosom width and bosom thickness.

• Clinical and Experimental Pediatrics
• /
• v.48 no.12
• /
• pp.1389-1389
• /
• 2005

The long arm duplication of chromosome 3 was reported for the first time in 1966 by Falek et al., and Hirschhorn et al. came to identify the duplication of 3q21${\rightarrow}$qter region in 1973. In most cases of duplication 3q syndrome patients, pure duplication of 3qter is believed to be rare and is often reported accompanied with deletion of another segment of the chromosome. Approximately 75 percent of parents of the patient in the meantime have been demonstrated to have unbalanced translocations or inversions of the chromosome. Partial deletion of the distal part of the short arm of chromosome 3 was first reported by Verjaal and De Nef in 1978 and terminal deletion of chromosome 3 (3p25-qter) has been observed in most cases. In karyotyping of chromosomes of immature infants showing the manifestations of flat occiputs, low set ears, hypertelorism, broad nasal roots, thin lips, web necks, hypotonia, hypertrichosis skin, cryptorchidism etc, we experienced a case diagnosed as 46,XY, rec(3)dup(3)(q21)del(3)(p25)inv(3)(p25q21).

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.905-916
• /
• 2004

Self-organizing hierarchical ad hoc network (SOHAN) is a new ad-hoc network architecture designed to improve the scalability properties of conventional 'flat' ad hoc networks. This network architecture consists of three tiers of ad-hoc nodes, i.e.. access points, forwarding nodes and mobile nodes. This paper presents a topology discovery and routing protocol for the self-organization of SOHAN. We propose a cross-layer path metric based on link quality and MAC delay which plays a key role in producing an optimal cluster-based hierarchical topology with high throughput capacity. The topology discovery protocol provides the basis for routing which takes place in layer 2.5 using MAC addresses. The routing protocol is based on AODV with appropriate modifications to take advantage of the hierarchical topology and interact with the discovery protocol. Simulation results are presented which show the improved performance as well as scalability properties of SOHAN in terms of through-put capacity, end-to-end delay, packet delivery ratio and control overhead.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.429-434
• /
• 2006

A CCTV system reduces some number of cameras if we use convex-mirror. In this case, convex-mirror Image distorted, we need transformation to flat images. In the center of mirror images, a transformed image has no distortion, but at near boundary image has plentiful distortion. This distortion is caused by occlusion of angled ray and diffraction. We know that the linear filtering approach cannot separate noise from signal where their Fourier spectra overlap. But using a non-linear discretization method, we shall reduce blurred noise. In this paper, we introduce the backward solution of nonlinear wave equation for reducing blurred noise and biased expansion of equilibrium contour. We propose, after applying the introduced method, and calculate with discretization method. To analysis the experimental result, we investigate to PSNR and get about 4dB better than current method.

• The Journal of the Korea Contents Association
• /
• v.11 no.3
• /
• pp.201-210
• /
• 2011

Discussion on restoration of Yi Sun-sin's Geobukseon used in sea battles of Imjin War continues. This is because no historical records which we can understand external and internal structure of Geobukseon used in Imjin War do not remain until now. The Geobukseon currently restored based on pictures of woodprint of Jella-jwasuyeong and Tongjaeyeong Geobukseon in Yi-chungmugong Jeonseo published by king's command in the 19th year (1795) of King Jeongjo, but two Geobukseons were built 203 years after Imjin war and not the same as that of Imjin War. Geobukseon that was built by Yi Sun-sin in Imjin War and restored now has many problems in terms of its structure and shape since they do not accord with the records of the literature at that time. Yi Deok-hong's Picture of Hexangonal Ship, drawing Geobukseon in 1593 for the first time was not in it in the study of Geobukseon, but it agrees with Imjin War in terms of the time and in analysis of the structure through picture interpretation and the relationship between Panokseon, Jella-jwasuyeong, and Tongjaeyeong Geobukseon, the center of the upper part of the roof cover is flat, and iron spikes are stuck in the front, back, left and right. The structure and shapes of Geobukseon in the records at the time of Imjin War.