• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.17-20
• /
• 2008

As a part of a research program to study the shear reinforcement of flat plate system, this investigation aimed to determine the effect of shear reinforcement type on punching shear strength of monolithic slab-column connection. A total of 5 specimens were fabrication and tested. The dimension of the slab were $2.63{\ast}2.725{\ast}0.18m$, with a centrally located column $0.6{\ast}0.8m$ in cross section. Experimental results showed that the CFS shear reinforcement was not effective because of lack of proper bond with concrete. 3 shear reinforcement except of CFS showed high effectiveness, which resulted in a considerable increment of the punching shear resistance of the connection.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.

• The KIPS Transactions:PartB
• /
• v.16B no.1
• /
• pp.1-6
• /
• 2009

It is very difficult to restore the images degraded by motion blur and additive noise. In conventional methods, regularization usually applies to all the images without considering local characteristics of the images. As a result, ringing artifacts appear in the edge regions and noise amplification is in the flat regions, as well. To solve these problems, we propose an adaptive iterative regularization method, using the way of regularization operator considering edge directions. In addition, we suggest an adaptive regularization parameter and an relaxation parameter. In conclusion, We have verified that the new method shows the suppression of the noise amplification in the flat regions, also does less ringing artifacts in the edge regions. Furthermore, it offers better images and improves the quality of ISNR, comparing with those of conventional methods.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.348-357
• /
• 2017

In this study, we examined the physical properties of cement mortar by replacing a part of the amount of fine aggregate in moist mud flat. I analyzed the possibilities of using bricks. Flow measurement results show that the flow value increases as the mixing ratio of cement and fine aggregate increases and the flow value decreased as the replacement ratio of moist mud flats decreased. Chloride contents were also found to decrease with decreasing substitution rate of moist mud flats. As a result of the compressive strength measurement, the compressive strength increased in inverse proportion as the displacement ratio of moist mud flats decreased in most mixing ratio. As a result of tensile strength measurement, the tendency was similar to compressive strength and the intensity increased as the replacement ratio of moist mud flats decreased.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.6
• /
• pp.185-192
• /
• 2021

In this study, Full-scale hollow slab Mock-up with VPS(Void Plywood Slab System) was produced. Through Mock-up, the safety of the flat plate hollow slab against short-term sagging and long-term sagging is to be evaluated. The hollow rate of the mock-up specimen to which the hollow core slab was applied was designed to be 24%. When loading through concrete blocks, the most central part of the slab was deflection 8.88mm when loading. However, it shows a safe value compared to the reference value (l_n/240=17.93mm) for short-term deflection. As a result of 3 months of measurement of the mock-up experiment, the deflection at the center of the slab increased by 6.792mm from the initial deflection. In addition, it was found that the reference value by the load used suggested by KBC2016 was satisfied.

• Journal of The Geomorphological Association of Korea
• /
• v.23 no.1
• /
• pp.17-33
• /
• 2016

Samples from newly exposed outcrop of sedimentary layers forming Jeongdongjin coastal terrace in Gangreung area are collected and analyzed to find the sedimentary environment. The site are located at the gentle hillslope of the terrace surface area. The height of the outcrop is about 8m and the altitude of it's highest part is 68~73m MSL. The lowest part of this out crop is the partly consolidated sand layer with gravel veneer within it. It is found that this part is not in-situ weathered sand stone through the OSL method. This sand layer is overlain by the gravel layer with sand matrix. The shapes of the gravels from this part are mainly 'platy', 'elongated', and 'bladed' by the index of Sneed and Folk(1958). In addition, mean roundness is not so high. It is sceptical to regard this part as marine sediments which are continuously exposed to erosional processes. The boundary between the lowest sand layer and gravel layer showing the abrupt change in forming material without any mixture or transitional zone, so gravels are seemed to deposited after some degree of consolidation of the lowest sand layer. In addition, the hight of the boundary between layers are changed by the place, so the surface of the partly consolidated sand layer is not flat and has irregularity on topography when it buried by gravels. Main part of this out crop is the poorly sorted coarse gravel(22.4mm) with sand matrix($1.36{\phi}$) layer with at least 2m thick covering the relatively fine gravels discussed above. Over 20% of particles have 'very platy', 'very elongated' and 'very bladed' shape and only less than 5% of particles have 'compact' shape, So this particles are also very hard to be regard as marine gravels which are abraded by marine processes. It can be concluded that this gravel layer formed by fluvial processes rather than coastal processes base on the form of the clast and sedimentary structure. The gravel layer is covered by fine($3{\sim}4{\phi}$) material layers of psudo-gleization which showing inter-bedding of red and white layers. Chemical composition of matrix and other fine materials should be analyzed in further studies. It is attempted to fine the burial ages of the sediment using OSL method, but failed by the saturation. So it can be assumed that these sediments have be buried over 120ka.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.4
• /
• pp.267-285
• /
• 2002

Dok Island, a Pliocene volcano, lies in the southwestern part of the East Sea. Most the work to date have focused primarily on the petrolography of the island, and as a result, the morphological characteristics and internal structure of the volcanic edifices of the Dok Island remain poorly understood. To provide better constraints on these features, bathymetric data with multibeam echo sounder, 32-channel seismic and 3D gravity modeling were used in this study. Three positive topographic highs are present in the study area, and these highs satisfy the seamount criteria. They are named as Dokdo, Tamhae, and Donghae seamounts. 32-channel seismic survey was conducted to investigate the sediment thickness of the area, which shows that there are no sediments near the summit of seamounts. Away from the seamounts, however, sediment becomes thick(>2000 m) toward the western part of the study area, and sediments in the northern and southern parts are about 1000 m thick. Free-Air gravity anomalies in this study generally follow the bathymetric feature with less than -20 mGal at the western part, but increase towards the seamounts. In the summit of the Dokdo Seamount, anomalies reach over 120 mGal, and in Tamhae and Donghae seamounts, the peak anomaly shows 90 and 70 mGals, respectively. All seamounts have an isolated volcanic conduit in their centre and show regional compensation root with 0.5～1.5 km thickness. The flat-topped summit of the seamounts is probably caused by wave truncation, indicating the sea level at the time of formation of the flat-topped geometry. Comparison between the present-day sea level and subsidence level during the opening of the East Sea suggests that the seamounts in the study area have subsided by 200～300 m after the formation. Furthermore, it implies that the seamounts formed over 12～10 Ma.

• Journal of Sasang Constitutional Medicine
• /
• v.8 no.1
• /
• pp.101-186
• /
• 1996

The clinical application of constitutional Diagnosis is the most important part of Sasang constitutional medicine. It has been studied in various way. However, the study of morphologic characteristics on the face is applied for the first time. For quantitative analysis of the correlation between the sasang constitution and the shape of the face, the head-facial part of 170 cases were measured by Martin's measurement and analysis of a) the measurement value of height and the component ratio from the Gnathion to each part of face by constitution. b) the measurement value of depth and the component ratio from T-projected to each part of the face by constitution. c) the measurement value of breadth and component ratio between each parts of the facial breadth by constitution. d) the ratio of square on every part of face by constitution. e) the characteristics on each part of the face by constitution. f) the contour line of the forehead. g) the result of discriminant analysis about the constitution. Authors obtained the results from the study as follows; 1. The characteristics of Taeum-IN (1) The measurement value of Height, Breadth, T-Projected had a tendency to maximum value in general. (2) The value of lower opthal height and the square of lower opthal part was maximum. (3) The value of Pronasal T-projected length and Subnasal T-projected length was minimum, so Taeum-In has characteristics of depression in middle face, nasal part. (4) In the ratio of Breadth, T-Projected, T-Projected was minimum. (5) It was maximum that the square of nose, Alare, Middle face, Lower face and it was minimum that the square of eye. The square of nose, Alare, Middle facc, Lower face was maximum and the square of eye was minimum. (6) The curvature of the eyebrow was minimum. (7) The projection of jaw (Pogonion T-projection length) was maximum. (8) The breadth of eye was minimum. (9) There was a tendency that the projection of the forehead to the right in general. 2. The characteristics of Soeum-In (1) In all cases of projected length the measurement value was minimum. (2) The value of lower opthal height and the square of lower opthal part was minimum. (3) By the Pupulare T-projected length, the value of Pronasal T-projected length and Subnasal T-projected length was minimum, so the Soeum In's face shape is flat. (4) The square of eye, mouth, forehead was maximum and the square of nose, Alare, Middle face, Lower face was minimum. (5) The curvature of the eyebrow was maximum. (6) The projection of mouth was minimum. (7) The jaw was flat. (8) The breadth of eye was maximum. (9) There was a tendency that the projection of the forehead to the left in general. 3. The characteristics of Soyang-In. (1) In most cases of 고경 length the measurement value was minimum. (2) By the Pupulare T-projected length, each ratio of projected length was maximum, so the Soyang-In's face shape has many protrusions (3) In the ratio of Breadth, T-Projected, T-Projected was maximum. (4) The square of mouth was minimum. (5) The inclination of the forehead was minimum. (6) The projection of mouth was maximum. (7) The breadth of eye was minimum. (8) There was a tendency that the projection of the forehead to the left in general. (9) The middle face was protruded. 4. Discriminant about the constitution. According to the result of discriminant, the accuracy probability of discriminant was 85.58% in total and Taeum-In was 90.5%, Soeum-In was 70.8%, Soyang-In was 89.5%. The accuracy probability of discriminant about 3 constitutional group increased by 49.03% than the accident probility 36.55% 5. Suggestion (1) The study which gather and analysis the data should be continued. (2) The study which subdivide the characteristics of each part of the face by the constitution should be continued. (3) The analysis method about Moire should be supplement. (4) The study about the morphologic characteristics of the whole body should be continued. (5) Computer program of constitution diagnosis should be developed. (6) To increase utility of this method, the measurement should be automation.

• Journal of Fashion Business
• /
• v.14 no.1
• /
• pp.57-75
• /
• 2010

This study is done in Shanghai area by sample survey of female college students in their lower 20s. Through direct contact survey, this study collected and analyzed information on figure to understand feature of breasts and measurements of body to provide base information to improve product of brassiere for adult female in China. Data was analyzed by using SPSSWIN 13.0 Program and SAS 9.0. 1. From a result of factor analysis on 40 items of measures to derive the components of the shape of the breast, 6 factors were derived such as the factors to show the obesity of the bust, to show the ratio of the upper and lower area of the lower bust, droop and volume, to show the internal shape and broadness of the bust, to show the location and vertical size of the bust, to show the protrusion of the bust and the eternal shape of the bust. 2. From a result of classification on the shape of the breast of the Chinese women in their early 20s, 4 types were selected. Type 1 is the protrusion type that a woman has a broad drooped breast due to the development in the upper and lower parts of the chest as well as the highest height, a high degree of obesity in the bust part, big volume and much protrusion. Type 2 is the hemisphere type that the degree of obesity in the breast is second to Type 1 and a breast is located at a region higher than Type 1 as the degree of obesity in the breast is secondly highest, the lower part of the bust is bigger than the Type 1 and the degree of being broad and drooped is second to Type 1. Type 3 is the cone type with a breast of being drooped and broad a little bit and a certain degree of a volume. Type 4 is the flat type with the smallest value in the item that shows the obesity of the bust area and with the smallest value in the R$\ddot{o}$hrer index to have the small and slender body type for the bust area, which is somewhat flat due to a low slope at the internal side of the bust.

• Fashion & Textile Research Journal
• /
• v.9 no.2
• /
• pp.176-187
• /
• 2007

Buddhist paintings in the late Joseon dynasty are characterized by diversification and subdivision of subject matters. Buddhist paintings rapidly declined since 19th century, being miniaturized and showing complicated composition. Figures that identified the shape of shoes in Buddhist paintings of late Joseon dynasty included sacheonwang that were placed in the left and right bottom of Buddhist paintings, sinjung, gwiwang and pan-gwan of siwangtaeng. Sacheonwang, an Indian folk god, was depicted as a noble person in "ahamgyeong", an early sutra, but was depicted as an armored warrior in Mahayana Buddhism world. The style of shoes sacheonwang in Korea were different depending on the times. The shoes of the sacheonwang sculpture in Seogguram of Shilla dynasty are sandal type. The sacheonwang that was drawn on Jijangbosaldo in Goryeo dynasty wears non-showy armor and red yi(履). The sacheonwang that was expressed on Buddhist paintings in Joseon dynasty wears showy armor and decorated hwa. Comparing the yi of Goryeo Jijangbosaldo sacheonwang with the yi of Bodhisattva on the Dunhuang yeolbanbyeonsangdo, Jijangbosaldo sacheonwang's shoes are Korean style in which the sole is flat and the front part has no decoration, but in the shoes of Bodhisattva on the Dunhuang yeolbanbyeonsangdo the sole is not flat, the front part is lifted. The style of shoes of pan-gwan, who is depicted on Siwangtaeng, is hwa. However, unlike the decorative hwa of sacheonwang, its front is not lifted and it has no decoration. It is assumed that the shoes of sacheonwang or pan-gwan represented obangsaek based on the idea of eumyang-ohaeng. Depiction of shoes shown in Buddhist paintings reflected the phases of the social life. In addition, the sandals of Shilla sacheonwang implies that sourthern culture in addition to Buddhism was introduced. Having expressed the shoes of Goryeo sacheonwang with conventional yi implies that Buddhism governed the inner world of the people, and the shape and material of the shoes reveals aristocracy. It is assumed that that an armored warrior wore yi, not hwa implies that the then society was stable. Also, it is assumed that that the shoes of sacheonwang on Buddhist paintings in Joseon dynasty were hwa implies that the role of tutelary god was stressed in the disordered society.