• Korean Institute of Interior Design Journal
• /
• v.18 no.5
• /
• pp.175-182
• /
• 2009

Korea Protestant slower growth and social church's changes in the environment of the traditional worship center for the sermon to a variety of changes was required, because of this period reflects the availability of a new type of worship was to appear. These changes in the type of worship in the form of the worship space, and space configuration is affecting many more. This study was the type of church korea today, the type is classified as a traditional worship and contemporary worship, and to characterize the category by a change in the type of church worship space in the configuration that affects cases throughout the analysis was to investigate, study follows. Traditional worship the center of the altar, the altar placed platform form, a vertical elevation of the platform sheet form, the installation of the cross, place the side of the choir seats, church chair type attribute appears tradition and in part compressed pulpit appears symbolism. Contemporary worship to the exclusion of the symbolic elements of the platform open, flat sheet form and the platform was the preferred form of minor elevations of the flat, multi-purpose space used for worship to sermon platform placed around the altar of the adjustable type, the choir seats placed in scheelite, preferred form of scheelite was an individual chair. However, the characteristics of traditional and contemporary worship space features a mix of worship space, quite a lot of cases that have been found. Integrated and consistent element of the worship space, the worship of the discrepancy in the form of systematic theological depth analysis did not come true without lust about contemporary culture is changing rapidly to accommodate sprawl is judged. Therefore, the characteristics of the type of worship and prayer to understand the changes in the church building is a prerequisite to be a very important aspect.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1378-1388
• /
• 2004

This paper proposes method to improve the image quality degradation that show when reconstructing compressed images at low bit rate by using wavelet transform. The image quality distortion is blocking artifacts and noise in DCT's compression but blocking artifacts of wavelet transform does not appear and ringing artifacts was appeared near the edge. This proposed technique is classified to part which is ringing artifacts of the edge vicinity appears which is not, apply adaptive filter to each region improved image. A edge region which is harsh to the eye is applied by Canny mask and finding strong edge region, search the neighborhood classify the flat region and the texture region, and apply to each region suitable filter, As experiment result, PSNR value of method that is proposed in that low bit rate compression image that ringing artifact appears became low about 0.05db, but 0.023db degree rose strong edge region and nat region's image. Also, showed picture quality improved more than ringing artifacts in nat region when see from subjective viewpoint of human.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.27-35
• /
• 2017

Human activity such as agriculture, industrial development and urban sprawl has been the major threat to wetlands ecosystem, which have caused the greatest losses of coastal wetlands. The Garorim bay provides one of the most important wetland habitate and Ministry of Oceans and Fisheries designated Garorim bay to marine ecosystem protected area in July 2016. The purpose of this research is to analysis the spatial pattern of Garorim bay using Landsat 5 (TM), Landsat 7 (ETM+), Landsat 8 (OLI & TIRS). The surface temperature and NDVI of Garorim bay were processed with spatial analysis method and time series analysis were applied to 25 years Landsat satellite 19 images. The results of time series distribution map compared with the several wetland habitate on remotely sensed images. Landsat images showed the change area of wetland vegetation distribution from 1988 to 2014. The southern part habitate of Garorim bay have been changed with vegetation patterns on coastal wetland which were covered with tidal flat.

• The Korean Journal of Malacology
• /
• v.14 no.2
• /
• pp.121-130
• /
• 1998

Studies on the distribution and growth of the mud mussel, Musculista senhousia, were carried out in the mud-tidal flat near Mokpo from August 1996 to July 1997. The patch distribution of the mussel was observed in the middle part of the tidalflat during the study period. Annual mean density was 8,215${\pm}$1,394 ind./m2 and annual mean biomass was 1,966.43${\pm}$668.49 g TWwt/m2 in total wet weight, 760.04${\pm}$279.13 gMWwt/m2 in meat wet weight, 209.93 ${\pm}$ 49.41 gMDwt/m2 in meat dry weight, and 109.66${\pm}$58.78 gAFDW/m2 in ash-free dry weight. The monthly mean size of shell length varied from 11.00 mm to 16.97 mm. Relationship between shell length (SL) and shell height (SH) showed a positively significant regression (SH=0.482SL+0.791, R2=0.940, P<0.001). Regressions of total wet weight (TWwt) (TWwt=7.601${\times}$10-5SL3.052, R2=0.905, P<0.001), and meat wet weight (MWwt) (MWwt=1.127${\times}$10-5${\times}$SL3.404, R2=0.784, P<0.001) on shell length were positively allometric, with highly significant correlation coefficient. The relationships between SL and meat dry weight (MDwt), and AFDW were MDwt=9.813${\times}$10-6${\times}$SL2.928 (R2=0.421), and AFDW=1.015${\times}$10-5${\times}$SL2.922(R2=0.810), respectively. The condition factor of the mussel has been increased from March and formed a peak in July and August. It was sharply dropped in September. These results suggest that the gonadal development of the species commenced to be occurred in spring and that main spawning occurred between August and September.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.913-918
• /
• 2005

It is expected that the inkjet technology offers prospect for reliable and low cost manufacturing of FPD (Flat Panel Display). This inkjet technology also offers a more simplified manufacturing process for various part of the FPD than conventional process. For example, recently the novel manufacturing processes of color filter (C/F) in LCD, or RGB patterning in OLED by inkjet printing method have been developed. This elaborates will be considered as the precious point of manufacturing process for the mass production of enlarged-display panel with a low price. On this point of view, we would like to review the status of inkjet technology in FPD, with some results on forming micro line by inkjet patterning of suspension type silver nano ink as below. We have studied the inkjet patterning of synthesized aqueous silver nano-sol on interface-controlled ITO glass substrate. Furthermore, we designed the conductive ink for direct inkjet patterning on bare ITO glass substrate. The first, the highly concentrated polymeric dispersant-assisted silver nano sol was prepared. The high concentration of batch-synthesized silver nano sol was possible to 40 wt%. At the same time the particle size of silver nanoparticles was below $10{\sim}20nm$. The second, the synthesized silver nano sol was inkjet - patterned on ITO glass substrate. The connectivity and width of fine line depended largely on the wettability of silver nano sol on ITO glass substrate, which was controlled by surfactant. The relationship was understood by wetting angle. The line of silver electrode as fine as $50{\sim}100\;{\mu}m$ was successfully formed on ITO glass substrate. The last, the direct inkjet-patternable silver nano sol on bare ITO glass substrate was designed also.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.154-163
• /
• 2013

Adhesive bonding and plastic welding have been widely used to join two plastic materials together. The goal of this paper is to determine a proper joining technology of a pair of flat panel (FP) photobioreactor (PBR) case. The material of the FP PBR case is polycarbonate (PC) plate. Two types of adhesion, including acryl adhesive and two-part epoxy adhesive, as well as two types of plastic welding technology, including ultrasonic welding and thermal welding, are employed for joining of PC plates. In order to influence of the adhesion and welding conditions on the joining characteristics of the PC plates in operational conditions of the FP PBR case, the morphology in the vicinity of the joined region as well as the water and pressure resistance characteristic are investigated. In addition, the variation of the bonding strength of the joined region and deformation behaviors in the vicinity of the joined region according to the adhesion and welding conditions is examined via the lap-shear test. From the results of basic experiments, proper joining technologies are chosen. Using the chosen joining technologies, the FP PBR case are fabricated to perform full-scale durability experiment. The results of the full-scale durability experiment have been shown that the chosen joining technologies can be applicable to fabricate the FP PBR case.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.1
• /
• pp.58.3-58.3
• /
• 2017

In a ${\Lambda}CDM$ universe, galaxies are believed to evolve by mergers and accretions. The debris resulting from such processes remains as diffuse, low-surface brightness structures, such as outer disks, stellar halos, and faint companions. These structures will give us fruitful insight into the recent mass assembly history of galaxies, but it is challenging to observe them due to their low surface brightness. In order to explore the structural properties of outskirts of nearby galaxies, we conduct deep wide-field imaging survey with KMTNet. Here we present a progress report of data reduction for the images of NGC 1291, a lenticular barred galaxy with outer rings. To achieve accurate flat fielding, we use dark sky flat and remove the sky gradient of each exposure with a polynomial fit. As a result, we are able to reach 1 sigma depth of ${\mu}_R{\sim}29.6\;mag\;arcsec^{-2}$. We expect to investigate the surface brightness profile of NGC 1291 in 1-D profile, and color-gradient in the outer part of the galaxy using the B- and R-band images.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.3
• /
• pp.339-344
• /
• 2016

This study is conducted for analysis of distribution of macrobenthic by using satellite image and in-situ data in the intertidal zone of Suncheon bay. The satellite images on low tide on July 7, 2010 and high tide on Sept. 25, 2010, respectively, are classified into sea water, tidal flat and land. It is to extract for intertidal zone overlaying at low tide and high tide image from previously classified image. Total number of species emergence are 196 species in the intertidal zone, and most species are emergence in the right part of the subtidal zone. The Sigambra tentaculata is the dominant species and emergence the Mediomastus californiensis, Magelona japonica, etc. It is noticed that many kind of macrobenthic distribution in the subtidal zone more than the supralittoral zone. It find out that contamination due to organic through the macrobenthic distribution with a strong resistance to organic in the subtidal zone of Suncheon Bay.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.191-195
• /
• 2020

In this work, tensile tests, one of the most common test method to assess the condition of a corroded pipe, were conducted. According to ASTM E8 method, the use of flat or curved uni-axial tension test is allowed under the recommendation with the usage of grips corresponding to a curvature of the pipe. However, this method is not for corroded specimen. Furthermore, in the case of performing the multiple tensile tests with various curvatures, it is desirable not to produce zigs that fit each curvatures, if merely processing the specimen grip with curvature into the flat grip can show almost identical tensile behavior. Therefore, various tension simulations were conducted first to check if there exist any differences. Also, experiments on corroded tensile specimen were conducted and compared with the FEM simulation that reflects the actual geometry acquired from the 3D scanner.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.1-6
• /
• 1999

European spruce and maple were to be estimated as raw material of violin family instruments with linear modal analysis to provide the information data for the design of their bodies. Wood specimens cut in different direction were excited by impact hammer to measure the resonant frequency with typical vibrational modes. In spite of lower density than maple, European spruce showed the excellent acoustical properties with higher resonant frequency. And edge-grained spruce had more even frequencies than flat-grained ones to be more acceptable as front plate of violin. Resonant frequency was positively correlated with wood density of each specimen and the coefficients of edge-grained specimens were higher than those of flat-grained specimens of both wood species.