• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.10
• /
• pp.1017-1024
• /
• 2001

The optimum shape of header part in a PFHE (parallel-flow heat exchanger) is studied. The optimal values of each geometric parameter are proposed according to their order of influence with varying the four important parameters (the injection angle of working fluid ($\Theta$), the shape of inlet(S), the location of inlet ($y_c/D_{in}$) and the height of the protruding flat tube ( $y_{b/}$ $D_{in}$ )). The optimal geometric parameters are as follows:$\Theta= -21^{\circ}C,\; S=Type\; A \;an\;y_b/D_{in}$/=0. The heat transfer rate of the optimum model, compared to that of the reference model, is increased by about 55%. The optimal geometric parameters ran be applicable to the Reynolds number ranging from 5,000 to 20,000.0.

• Korean Journal of Human Ecology
• /
• v.15 no.5
• /
• pp.811-821
• /
• 2006

The purpose of this report was to study visual effect and functional effect of waist line location of slacks for females in 20'. 1. Differences of visual effect of slacks waist line change to be expressed that mature, sexual and casual slacks waist line were W4 or W5, looks like long leg and mature and formal slacks waist line was W1, slim lower part of the body and flat slacks waist line was W4. 2. Analysis result of functional effect difference with the location variation of slacks waist line were as follows. In all motions(M1, M2, M3, M4) W2 that downed 7cm-6cm-6cm from natural waist line was valued as the most comfortable, W1 and W5 were valued as discomfortable, where waist line was too high or too low.

• Journal of Industrial Technology
• /
• v.23 no.A
• /
• pp.21-27
• /
• 2003

The bio-micro pin is usually used for biochemistry analysis. The capability of manufacturing the micro-pin and array with effective and low-cost way is very important to developers. The micro-pin is composed of "sample channel" putting liquid into already fixed volume, "flat tip" having connection with printing quantity, and "head part" for preventing it from rotation of pin in the holder. We analyzed out printing variation in accordance with shape and tip size of the micro-pin point channel, In this study, we suggested the manufacturing progress and shape demand condition of the micro-pin which could put $0.2{\mu}{\ell}$-biochemistry material into the sample volume, and will be able to produce the micro-pin which can put $10n{\ell}$-biochemistry material into the sample volume in the future.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.2 s.32
• /
• pp.11-17
• /
• 1999

The objective of this paper is to introduce very fast but still stable solution using finite element procedures, and it has been used in an iterative mode for product design applications. A lot of numerical techniques have been developed to deal with the material, geometric and boundary condition non-linearities occurred in the stamping process. One of them, the One-Step FEM is very efficient and useful tool for a design and trouble-shooting in various stamping processes. In this method, the mathod, the material is assumed to deform directly from the initial flat blank to the final configuration without any intermediate steps. The formulation is based on the deformation theory of plasticity and the upper bound theorem. As a result of the calculations, the initial blank shape is obtained, together with the material flow, strains and thickness distribution in the part.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1340-1345
• /
• 2010

FRC(Frame Rate Control) has been applied to the monitor and TV product as part of cost-saving in many flat panel display manufacturers. As FRC can represent the same number of gray scale level with bits of a smaller amount than bits of the input image data, it is widely used. However, FRC causes visual artifacts by using repeatedly pre-designed the FRC unit size of block pattern in display devices. Therefore, this paper analyzes the cause of the visual artifacts. And in order to improve them, it proposed the pattern arrangement of FRC unit blocks through frame rolling method as analytic solution for the first time. So, we could embody causes of FRC noise. Using the proposed structure, more robust pattern to FRC noise will be designed.

• Corrosion Science and Technology
• /
• v.6 no.2
• /
• pp.68-73
• /
• 2007

The toxicity of chromium that is used to impart corrosion resistance to galvanized steel created environmental and health-related concerns and generated a great deal of interest in developing chrome-free treatment coatings. In the present work, organic-inorganic composite coatings were used to coat electrogalvanized steel (EG) sheets for corrosion protection without degrading its weldability property. The new coatings composed of specially modified polyurethane dispersion hybridized with silicate and unique inorganic-organic inhibitors were developed during this work. It was found that about $1{\mu}m$ thickness of coating layer is secure enough in corrosion resistance of flat and formed part even after alkaline degreasing. Overall chemical resistances including fingerprint resistance and paint adhesion property were satisfied with the test specification of Sony technical standard of SS-00260-2002. Therefore, it is concluded that the newly developed chrome-free product can replace the conventional chromated product.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.15 no.1
• /
• pp.59-66
• /
• 1985

The Purpose of this study is to detect morphological changes of the maxilla following the operation of paranasal sinuses in the orthopantomogram. 1) The measurement of the angle set up by two reference lines which represent posterior aspect of the maxilla and skull base was made. 2) The mean angle in the post-operative patients showed significantly smaller than that in the normal subjects. 3) The forms of posterior aspect of maxilla were classified into 5 types. (flat, convex, concave, uneven and obliterated.) 4) In contrast with the convex type in the majority of normal subjects, approximately half of the post-operative patients showed the concave type. 5) These results may suggest that the superior part of the posterior aspect of the maxilla tend to depress following the operation of these paranasal sinuses.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.54 no.3
• /
• pp.125-132
• /
• 2012

Saemangeum development project is the world's largest tidal flat reclamation project. It is currently under construction, and proceeding with phased developments. The construction of agricultural areas within the Saemangeum reclamed lands is also a part of this project. These areas will have multi-functional complexes aiming to produce mainly eco-friendly horticultural crops and livestock products for the purpose of export. The major concern is to obtain sufficient water with appropriate quality to supply to those areas. The objective of this study is therefore to provide available water supply plans for agricultural purpose, especially for horticulture and livestock complexes. Alternative methods for water supply are purifying water from the Saemangenm lake or using water supply services providing by K-water or local governments. This study investigates to find an economical water supply plan through comparisons of these methods. As a result, the water purification method with Saemangeum lake water could be advantageous for given water supply conditions to horticulture and livestock complexes.

• Journal of Power System Engineering
• /
• v.6 no.4
• /
• pp.36-42
• /
• 2002

In the structures of automobiles and ships which have engines for works, the vibration energies generated by the engines are transferred to dissipation parts through the structures which is welded and bolted with beams and plates. The vibration energies generated by resonance frequencies are the reasons of the resonance phenomena. To solve these problems, up to the present, we have studied to avoid the resonance, and add the higher damping characteristics. However, we need to understand the structural energy flows, to design the structures clearly which have the characteristic of welding. The object of this study is to make differences clear in the characteristics of structures which have some welded part on an homogenous flat plate. In this investigation, we study the flows of structural vibration energy experimently, and then, some knowledge for dynamic structural design is obtained.

• Korean Journal of Remote Sensing
• /
• v.2 no.2
• /
• pp.95-105
• /
• 1986

The geomorophology of the tidal near $K\breve{u}$m river estuary on the west coast of Korea was studied using satellite images. There Landsat image of different tidal moment were geometrically corrected to be overlapped one another. Then topographic contours were extracted for the analysis with concept of 3-D. According to the morphological analysis, the tidal flats around $K\breve{u}$m river estuary area can be classified in three morphologically different groups: one is developped in a belt type along the shore; another is a delta type in the estuary; the other is developped between the shore line and islands. The morphological characteristics of the tidal flats in the study area seems to be mainly influenced by the tidal dynamics which are very storg on the weatern coastal zone of Korea. However the waves and human activities seem also to be important in some part of the area.