• Membrane Journal
• /
• v.28 no.1
• /
• pp.37-44
• /
• 2018

Polysulfone composites including graphene were prepared, and their thermal characteristics in membrane states were analyzed by using a custome-made residual stress analyzer and a thermal diffusivity analyzer based on laser flash method. The residual stress analysis was carried out on the polysulfone composite films deposited on Si (100) substrates for 1 cycle of heating and cooling runs. The flat membrane of graphene-embedded polysulfone composites were prepared by the phase transfer method in distilled water and the thermal conductivity was separately measured in the out-of-plane and the in-plane directions. The residual stress of the graphene-embedded polysulfone film was gradually decreased with increasing graphene loading and the out-of-plane thermal conductivity was distinguished from the in-plane thermal conductivity in the flat membranes. These thermal characteristics are caused by the structural uniqueness of graphene and the micro-void structures formed during membrane fabrication.

• KIISE Transactions on Computing Practices
• /
• v.23 no.8
• /
• pp.473-480
• /
• 2017

In recent years, semiconductor-based storage devices such as flash memory (SSDs) have been developed to high performance. In addition, a trend has been observed of optimally utilizing resources such as the central processing unit (CPU) and memory of the internal controller in the storage device according to the needs of the application. This concept is called In-Storage Processing (ISP). In a storage device equipped with the ISP function, it is possible to process part of the operation executed on the host system, thus reducing the load on the host. Moreover, since the data is processed in the storage device, the data transferred to the host are reduced. In this paper, we propose a method to optimize graph query processing by utilizing these ISP functions, and show that the optimized graph processing method improves the performance of the graph 500 benchmark by up to 20%.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.10
• /
• pp.23-31
• /
• 2011

Recently, Solid state disk is mainly used because this device has lower power consumption as well as higher response time. But it features higher price and lower performance at delete and write operations compared with HDD. To compensate this defect, Hybrid hard disk with internal non-volatile flash memory was issued. This NVCache is used as a kind of cache for disk blocks. In this paper, an I/O scheme for H-HDD is proposed for improving low power consumption as well as response time. Our method is to use this NVCache as read cache mainly and write cache when write requests are concentrated. In read cache operation, disk blocks with higher priority determined on basis of time as well as spatial localities are prefetched, which can improve response time. The write operation is conducted only at write peak time as disk spindle up costs higher battery power as well as response time. Experiments results show that the suggested method can improve response time of H-HDD and lower the power consumption.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.45-51
• /
• 2017

Engine oil is a substance used for the lubrication of internal combustion systems. However, in some case, defects in engine systems may contaminate engine oil with fuel. Contaminated engine oil can cause problems in the normal functioning of a vehicle. In this study, we investigate the functional properties of engine oil contaminated with diesel fuel. The test results indicate that the engine oil contaminated with diesel fuel has low flash point, pour point, density, kinematic viscosity and cold cranking simulator value. The contaminated engine oil which has low plash point can cause fire and explosion accident. Furthermore, a four ball test indicates that the contaminated engine oil increases wear scar to poor lubricity. Moreover, we investigate the GC pattern using SIMDIST (simulated distillation) for determination of diesel in engine oil. The SIMDIST analytic result, diesel was detected at earlier retention time than engine oil in chromatogram. Thus the SIMDIST method can define whether engine oil is contaminated by diesel fuel or not. We can use the SIMDIST method for the diagnosis of oil condition instead of analyzing other physical properties that require many analytic instruments, large volume of oil sample and long analysis time.

• Fire Science and Engineering
• /
• v.30 no.3
• /
• pp.16-22
• /
• 2016

Fire fighters rely on fire fighter protective clothing (FFPC) to provide adequate protection in the various hazardous environments. To enhance its protection performance, the FFPC material must be thick and thus it is difficult to achieve weight reduction. One of the methods of overcoming this problem, the addition of phase change material (PCM) to FFPC, is a new technology. In previous studies, the researches was mostly related to the temperature characteristics of the fibers incorporating PCM, but little information is available about its effect on burn injuries. Thus, in this study, the inhibitory effects of adding PCM to FFPC on second degree burns were investigated through numerical calculations. Thermal analyses of biological tissues and FFPC with embedded PCM exposed to several fire conditions causing severe tissue damage were studied by using a finite difference method based on the Pennes bio-heat equation. FFPC with embedded PCM was found to provide significantly greater protection than conventional fire fighting clothing, because the heat of absorption due to the phase change within the material is used to limit the heat conduction of the material.

• Journal of Korea Water Resources Association
• /
• v.50 no.12
• /
• pp.849-862
• /
• 2017

The increased frequency of meteorological disasters has been observed due to increased extreme events such as heavy rainfalls and flash floods. Numerous studies using high-resolution weather radar rainfall data have been carried out on the hydrological effects. In this study, a conditional merging technique is employed, which makes use of geostatistical methods to extract the optimal information from the observed data. In this context, three different techniques such as kriging, inverse distance weighting and spline interpolation methods are applied to conditionally merge radar and ground rainfall data. The results show that the estimated rainfall not only reproduce the spatial pattern of sub-hourly rainfall with a relatively small error, but also provide reliable temporal estimates of radar rainfall. The proposed modeling framework provides feasibility of using conditionally merged rainfall estimation at high spatio-temporal resolution in ungauged areas.

• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.835-844
• /
• 2009

Today, most of all the query processors in the world generally use the 'Pipelining' method to acquire fast response time (first record latency) and less memory usage. Each of the operator nodes in the Query Execution Plan (QEP) provides Open(), Next(), and Close() functions for their interface to facilitate the iterator mechanism. However, the embedded database systems for the mobile devices, based on the FLASH memory, usually require a function like Previous(), which returns the previous records from current position. It is because that, in the embedded environment, the mobile devices cannot fully provide it main memory to store all the query results. So, whenever needed the previously read records the user (program) should re-fetch the previous records using the Previous() function: the BACKWARD data fetch. In this paper, I introduce the 'Direction Switching Problem' caused by the Previous() function and suggest 'Block-wise Skipping' method to fully utilize the benefits of the block-based data transfer mechanism, which is widely accepted by most of the today's relational database management systems.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.10
• /
• pp.947-955
• /
• 2010

Most oil and gas reservoirs, which have some light hydrocarbon components, show sensitive phase behavior in response to changes in the composition of the internal fluid. When evaluating and developing plans for oil and gas fields, flash calculation, PVT analysis, and saturation-property calculation are necessary for analyzing reservoir characteristics and pipeline flows. In general, the determination of saturation properties such as dew point and bubble point is considered a difficult task because of the poor convergence of the calculation methods. In this study, several new initial-value-guessing methods and root-finding methods are proposed; parametric analysis were carried out to verify the improvement in convergence. Finally, these new ideas and methods were successfully applied to the new GUI based multi-phase behavior simulator.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.168-175
• /
• 2013

The delay times due to the propagating of data on PCB depend on the shape and length of interconnection lines when memory controllers and high speed memories are soldered on the PCB. The dependency on the placement and routing on the PCB requires redesign of I/O logic or reconfiguration of the memory controller after the delay time is measured if the controller is programmable. In this paper, we propose architecture of configuring logic for the delay time estimation by writing and reading test patterns while initializing the memories. The configuration logic writes test patterns to the memory and reads them by changing timing until the correct patterns are read. The timing information is stored and the configuration logic configures the memory controller at the end of initialization. The proposed method enables easy design of systems using PCB by solving the problem of the mismatching caused by the variation of placement and routing of components including memories and memory controllers. The proposed method can be applied to high speed SRAM, DRAM, and flash memory.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.1
• /
• pp.113-124
• /
• 2009

Recently, lots of anti-phishing schemes have been developed. Several products identify phishing sites and show the results on the address bar of the internet browser, but they determine only by domain names or IP addresses. Although this kind of method is effective against recent DNS pharming attacks, there is still a possibility that hidden attacks which modifies HTML codes could incapacitate those anti-phishing programs. In this paper, the cognitive approach which compares images to decide phishing or pharming is presented, using system tray and balloon tips that are hard to fake with pop-ups or flash in order for users to compare pictures from connecting sites and system tray. It differs from an old method that a program analyzes IP or domains to judge if it is phishing or pharming, but observes if there were HTML code changing between plug-ins and a server.