• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.57-64
• /
• 2008

In this paper, we propose a system-level simulator for the performance analysis of a Solid-State Disk (SSD) in PC environment by using TLM (Transaction Level Modeling) method. Our method provides quantitative analysis for a variety of architectural choices of PC system as well as SSD. Also, it drastically reduces the analysis time compared to the conventional RTL (Register Transfer Level) modeling method. To show the effectiveness of the proposed simulator, we performed several explorations of PC architecture as well as SSD. More specifically, we measured the performance impact of the hit rate of a cache buffer which temporarily stores the data from PC. Also, we analyzed the performance variation of SSD for various NAND Flash memories which show different response time with our simulator. These experimental results show that our simulator can be effectively utilized for the architecture exploration of SSD as well as PC.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.1-7
• /
• 2017

Currently, flammable liquids account for more than 87 wt% of the hazardous materials in circulation in Korea, and paint products are the most commonly used mixed hazardous materials. Therefore, one of the most urgent and important issues is that we have to secure the safety for manufacturing, storage and transport of paint products. In this study we investigated and analyzed the domestic hazardous materials safety management method, the international GHS test method and so forth. We tested risks for a variety of oil paints and found a relation between the results. Furthermore, the risk test method and criteria adapted for domestic situation was presented. Paints were classified as hazardous or non-hazardous according to the results of the flash point test, the amount of flammable liquid or the UN-combustion persistence test. It was revealed from the test results of 6 kind of oil-based paints using different resins that they were hazardous materials with very high risks and belonged to the Category 1 or the Category 2.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.593-598
• /
• 2022

Recently, data production has seen explosive growth, and the storage systems to store these big data safely and quickly is evolving in various ways. A typical configuration of storage systems is the use of SSDs with fast data processing speed as a RAID group that can maintain reliable data. However, since NAND flash memory, which composes SSD, has the feature that deterioration if writes more than a certain number of times are repeated, can increase the likelihood of simultaneous failure on multiple SSDs in a RAID group. And this can result in serious reliability problems that data cannot be recovered. Thus, in order to solve this problem, we propose a method of throttling IOs so that each SSD within a RAID group leads to a different life-end. The technique proposed in this paper utilizes SMART to control the state of each SSD and the number of IOs allocated according to the data pattern used step by step. In addition, this method has the advantage of preventing large amounts of concurrency defects in RAID because it induces differential lifetime finishes of SSDs.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.1
• /
• pp.5-11
• /
• 1978

Si-ZnSe n-n heterojunction was made by growing ZnSe thin film on the Si single crystal (111) surface with Bash evaporating method in vacuum. This heterojunction was found to be a useful device for frequency meter in the visible wave-length from the measuring of the photovoltaic effect of the heterojunction.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.6
• /
• pp.39-42
• /
• 1978

Orthorhombic yellow PbO thin films were prepared by evaporating PbO powder in vacuum and annealed in air. The evaporation was carried out by Hashing method. The energy gap, the type of electric conduction and the grain size of these films were 2.63eV, f type, and 670 nm respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.4
• /
• pp.477-482
• /
• 1983

섬광법의 응용범위를 증대하기 위하여 시편 저, 후면에서 복사와 대류 열손실이 있고, 전면에 임 의 열원이 가해지는 3층 복합재료의 열확산 방정식을 Green 함수를 도입하여 해석하였다. 본 해 석결과는 고체 재료를 1층 재료로 표면처리를 실시한 얇은 층 또는 코오팅 재료를 2층재료로, 용 기내에 들어있는 액체나 기체를 3층 재료로 하여 저온으로부터 고온에 이르기까지 광범위한 온 도에 걸쳐 열확산 계수를 구하는데 응용될 수 있다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06a
• /
• pp.11-12
• /
• 2008

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1019-1022
• /
• 2003

This paper has proposed a 4- bit 20MHz Flash A/D converter design available analog signal processing and realized its intergrated circuit. The parallel comparison method A/D converter quantized analog signals swiftly using various converters. Also this theme has designed economic power dissipation circuit using a preamplifier of low volt & power CMOS comparator. Also the system was fabricated by Hynix 0.35um CMOS process.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.107-110
• /
• 2002

Soft masks mean that part or all of the program code for operating system or applications are located in the EEPROM or flash ROM. Since Soft masks allow errors to be corrected and programs to be modified quickly and at minimal cost, they are used primarily during testing and in the field trials. This paper introduces a hardware architecture of IC card for soft masks. We suggest a new down loading scheme for soft-mask ROM connected by an I/O interface. This scheme saves the new IC card development cost and time.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10a
• /
• pp.32-33
• /
• 2007