• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.88.1-88.1
• /
• 2015

In recent printed electronics technology, Photo-Sintering, a technique for sintering materials using a light source, has attracted attention as an alternative to time-consuming high-temperature thermal processes. The key principle of this technique is the selective heating of a strongly absorbent thin film, while preventing the heating of the transparent substrate by the light source. Many recent studies have used a flash lamp as the light source, and investigated the material-dependent effect of the width or intensity of the pulsed light. However, the flash lamp for sintering is not suitable for industry yet, because of needing too high power to sinter for a large scale. In energy-saving and large-scale sintering, LED technologies would be very useful in the near future. In this work, we investigated a sintering process for silver nanoparticles using UV-LED array. Silver nanoparticles in ink were inkjet-printed on a $1{\times}1cm$ area of a PET film and photo-sintered by 365 nm UV-LED module. A sheet resistance value as low as $72.6m{\Omega}/sq$ (2.3 - 4.5 times that of bulk silver) was obtained from the UV-LED sintering at 300 mW/cm2 for 50 min.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.223-230
• /
• 2009

For pulse trigger way and the energy injection rate according to PET ($Pause^{10-90}$ $Energy^{20-40}$ $Trigger^{1-7}$) function, indeed, human body condition, period of dormancy in this research about this back correctly adjustment possible and designed harmless micro carrying along style hair exclusion so that can design and manufacture and run special quality examination and Xenon flash lamp to crawl in human body. Because creating individual's skin model to do stable treatment by light transmission way by skin impedance and measure, must embody treatment special quality of most suitable that draw skin color, energy, wave length, approximately, transmission time, pulse delay etc. and want. Specially, saved standard of war treatment pulse modeling by skin impedance, and manufacture pulse modeling system of most suitable by skin subordinate, and embody suitable treatment pulse. Specially, embody as could do root of a hair exclusion being emitted in pulse form using multi wave length of 560nm, 590nm, 640nm, 755nm and embodied clinical data. If become research repletion furthermore little more, is seen that can approximate in commercialization.

• 한국정보통신학회논문지
• /
• 제16권5호
• /
• pp.885-891
• /
• 2012

해상용 등명기의 동기 점멸은 해상에서 선박이 운항할 때, 다른 위험 표시기의 점등 패턴과 구분하여 선박의 안전한 운항을 지원한다. 일반적인 해상용 등명기의 점등기법은 낮과 밤을 감지하여 정해진 점등 규약에 따라 점등하는 방식으로 시간이 지남에 따라 등명기들의 시간 오차가 발생하여 등명기 전체의 동기 점멸이 이루어지지 못하고 있다. 이러한 문제를 해결하기 위하여 본 연구에서는 GPS의 위성시간을 기준으로 하여 모든 등명기들이 개별적으로 동기시간을 일정하게 맞추는 동기식 점등기법을 사용한 정전류방식의 해상용 LED 등명기를 설계하였으며, LED등명기 내부의 제한되고 밀폐된 공간에서 효율적인 방열성능을 갖는 방열방법을 제시하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.107-109
• /
• 2007

LED is expected as an environmentally friendly light source with its good reliability and long lifetime. A few ten mW white LED can substitute for the indicator light source, and it is required to study several watt multi-chip semiconductor light sources in order to replace the light sources for general illumination such as incandescent lights and fluorescent lamps. Since the optical technology used for several mW white LED light source uses only 30% to 50% of the light, it is required to develop the design technology of optical system and lens to improve the efficiency more than 80% for insuring the high power of white LED. In this paper, we designed and fabricated new structure reflector to increase the efficiency.

• 한국전기전자재료학회논문지
• /
• 제36권5호
• /
• pp.454-462
• /
• 2023

금속 나노 입자의 플래시 램프 어닐링 공정은 빠른 가공 속도(밀리초 단위), 저온 공정, 롤투롤 공정과의 호환성 등 이유로 유연한 기판 위에 고성능 전극을 제조하기 위한 강력한 솔루션으로 제공되어 왔다. 그러나 금속 나노 입자[예를 들면, 금(Au), 은(Ag), 구리(Cu) 등]는 저온 공정을 위한 미세 금속 나노 입자(직경 10 nm 미만)의 제조가 어렵고, 고가이며, 잉크보관 및 플래시 램프 어닐링 과정에서 산화가 발생하는 등의 한계가 존재했다. 이러한 이유로 유기금속화합물 잉크는 금속 나노 입자를 대체할 수 있는 재료로서 저렴한 가격(기존 금속 나노 잉크 대비 1/100의 가격)과 저온 공정성, 높은 재료 안정성으로 인해 제안되었다. 하지만 이러한 장점에도 불구하고, 유기금속화합물의 플래시 램프 어닐링 처리를 통한 유연한 전극의 제조는 광범위하게 연구되지 않고 있다. 본 논문에서는 사전 경험 없이 은 유기금속화합물을 플래시 램프 어닐링하는 과정에서 발생할 수 있는 어려움을 최소화하기 위해 재료 매개변수와 플래시광 처리 매개변수(에너지 밀도, 펄스 지속시간 등)를 고려하여 유연 기판에 전극을 제조하기 위한 최적의 조건을 결정하는 방법을 실험적으로 가이드하고자 한다.

• 대한전자공학회논문지
• /
• 제5권3호
• /
• pp.25-30
• /
• 1968

세논 섬광관의 방전회로에 관한 특성을 상세히 논했다. 섬광관은 전류에 비전형적이므로 방전회로에 관한 의 비선형 미분방정식을 유도하여 해를 상이형전자 계산기로 구했다. 또한 더욱이 임의의 섬광관에 대한 입력에너지 펄스지속시간 및 모양, 인덕턴스, 콘덴서 그리고 동작전압에 대해 완전히 고찰했다. 아울러 본 해석결과를 이용하면 성광관 방전계통회로를 정확히 설계할 수 있음을 제시했다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.167-170
• /
• 2004

A high light lantern system using LEDs is composed of power supply, flash controller, and daylight controller and proper case considering work condition. The performance of developed LED lantern is better than that of the existing marine lantern using an incandescent electric lamp and that of foreign products(Vega LED lantern made in New Zealand, Tideland system made in America). The electric consumption of our products is 30% compared with that of existing marine lantern using an incandescent electric lamp, and the luminous Intensity of them is 200% to 400% compared with that of existing marine lantern and foreign LED lantern. In addition, our LED lantern system is easy to repairing something wrong and changing the LED module and other controllers on the sea when they are in accident.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.1018-1021
• /
• 2009

여기시켜 고출력, 고안정화 레이저 빔 특성을 실험적으로 분석 및 고찰하였다. 실험적 결과 완전한 형태의 선형적인 레이저 빔 특성을 얻을 수는 없었으나 레이저 특성인 거의 선형적인 모양의 그래프 특성이 나타남을 확인할 수 있었다.

• 상하수도학회지
• /
• 제26권5호
• /
• pp.685-692
• /
• 2012

UV technology is widely used in water and wastewater treatment. Many researches have been conducted on microbial disinfection and micro pollutant reduction with UV treatment. However, the study on NOM with UV has limited because low/medium pressure UV lamp is not sufficient to affect refractory organics such as NOM. Pulsed UV treatment using UV flash lamp can be operated in the pulsed mode with much greater peak intensity. The pulse duration is typically in microseconds, whereas the interval between pulses is in the order of milliseconds. The high intensity of pulsed UV would mineralize NOM itself as well as change the characteristics of NOM. Chlorine demand and DBPs formation is affected on the changed amounts and properties of NOM. The objective of this study is to investigate the effect on NOM, chlorine residual, and chlorinated DBPs formation with pulsed UV treatment.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제3C권4호
• /
• pp.155-160
• /
• 2003

In this study, an Alexandrite laser system for hair removal adopting a multi-discharge method in which three flash lamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. Specifically, this study demonstrates a technology that makes it possible to formulate various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a PIC (program integrated circuit) one-chip microprocessor. With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and real-time control is possible with an external keyboard, enabling an assortment of pulse shapes. In addition, longer pulses can be more widely used for industrial processing as well as for numerous medical purposes.