• Membrane Journal
• /
• v.23 no.5
• /
• pp.384-391
• /
• 2013

We prepared composite membrane which was made with polysulfone supported hollow fiber membrane coated with Hyflon AD to eliminate $CO_2$ gas from mixed-gases which were generated in DME manufacturing processes. The performance of module about simulated flaring gas was measured by using manufactured composite membrane. 1-stage evaluation result shows $CO_2$ concentration was below 3% at 1.2 MPa and at Stage cut 0.24 above. In addition $CO_2$ removal rate and $CH_4$ recovery rate was 80% respectively at the same condition. 2-stage evaluation result shows, when the $CO_2$ concentration of product gas was fixed at 5%, recycled $CO_2$ at stage cut 0.074 had the same concentration as the feed gas and the recovery rate of $CH_4$ was 99% at the moment.

• Membrane Journal
• /
• v.25 no.2
• /
• pp.99-106
• /
• 2015

Polysulfone (PSF) hollow fiber membrane was prepared to separate $CO_2$ from the flaring gas. Fabricated PSF membrane system was fulfilled under 1 stage, 2 stage membrane process and simulation in order to confirm the operating condition for 99% of $CH_4$ and 1% of $CO_2$ concentration. Also, $25Nm^3/h$ bench scale $CO_2$ separation membrane system was operated under 1% of $CO_2$ concentration during 100 hr, and $CH_4$ recovery ratio was 98%.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.1
• /
• pp.61-72
• /
• 2002

The flaring system of FPSO burns out the byproduct natural gas. The thermal loading due to radiative heat of flaring gas leads to undesirable thermal-stresses on itself. Nowadays it needs to understand the amount of thermal loading of flaring system since the requirement for the safety of the flaring system. However, few studies have been performed on the thermal environment and radiative heat flux on the FPSO flaring system. Present study suggests a procedure to model the thermal environment and a FEA process to analyze the temperature distribution and thermal stresses of FPSO flaring system. In order to get the temperature distribution, the radiative heat conditions and convective heat conditions are included in the heat transfer analysis. By making the use of temperature obtained through heat transfer analysis, the thermal stress analyses are performed. The results of the present study can be used to design the flaring system and determine the heat shield in the flaring system.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.1
• /
• pp.45-53
• /
• 2015

The objective of this study is to develop a gas pro-treatment system for DME synthesis, wherein this system separates $CO_2$ from Flaring gas as Membrane, in order to save raw material ($CH_4$) cost of DME. In this study, hollow fiber membrane is developed, which is able to separate high-pressure gas, supported by polysulfone and coated with amorphous fluorinated polymer. Throughout the evaluation of the membrane's separation characteristics, the membrane is applied to this system. The membrane is designed by 2 stages for over 90% removal rate of $CO_2$ and over 90% recovery rate of $CH_4$. The bench scale of pro-treatment system is developed as $25Nm^3/hr$.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.171-177
• /
• 2007

In external galaxies, the velocity dispersion of the atomic hydrogen gas shows a remarkably flat distribution with the galactocentric radius. This has been a long-standing puzzle because if the gas velocity dispersion is due to turbulence caused by supernova explosions, it should decline with radius. After a discussion on the role of spiral arms and ram pressure in driving interstellar turbulence in the outer parts of galactic disks, we argue that the constant bombardment by tiny high-velocity halo clouds can be a significant source of random motions in the outer disk gas. Recent observations of the flaring of H I in the Galaxy are difficult to explain if the dark halo is nearly spherical as the survival of the streams of tidal debris of Sagittarius dwarf spheroidal galaxy suggests. The radial enhancement of the gas velocity dispersion (at R > 25 kpc) due to accretion of cloudy gas might naturally explain the observed flaring in the Milky Way. Other motivations and implications of this scenario have been highlighted.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.63.1-63.1
• /
• 2013

We present the results of time monitoring observations of $^{28}SiO$ v = 1, 2, J = 1-0, $^{29}SiO$ v = 0, J = 1-0 and $H_2O$ $6_{16}-5_{23}$ maser lines toward radio Source I in Orion KL. The observations have been performed from 2009 June to 2013 April using the 21m single dish radio telescopes of the Korean VLBI Network. Both SiO and $H_2O$ maser lines were simultaneously obtained at 20 epochs. In particular, the third outburst of $H_2O$ maser emission (the first: 1985, the second: 1998) was detected and the flux density variation curve was obtained. The maximum flux density flared up to an order of $10^5$ Jy during 2012 May-July at peak velocity of 7.33 km $s^{-1}$. Hirota et al. (2011) reported that the bursting maser features are located at 8" from Source I and coincident with the interacting region between the outflow from Source I and a dense ambient gas, Orion Compact Ridge. In the case of SiO masers arising from close to the Source I, the peak emission of the v = 1, J = 1-0 maser line appeared in 2010 April. We are investigating the possible relation between this SiO maser peak emission and the third $H_2O$ maser flaring.

• Parasites, Hosts and Diseases
• /
• v.38 no.3
• /
• pp.173-175
• /
• 2000

The present study examined postmetacercarial changes in the excysted metacercariae of Echinostoma caproni maintained in the defined medium Mixture 199 plus 20% calf serum for 7 days at $41^{\circ}C$. The gas phase was atmospheric air. Each culture was inoculated with 25 excysted metacerariae. Cultures were maintained upright in closed 15 ml plastic centrifuge tubes each containing 10 ml of medium plus 200 units of penicillin/ml and $200{\;}\mu\textrm{g}$ of streptomycin/ml. By 4 days in culture, most metacercariae had voided their excretory concretions. Organisms were clumped or solitary at the bottom of the cultures. Many organisms showed flaring of the oral collar and extension of both the collar and tegumentary spines. By 4 days in culture, posterior protuberances or bumps were noted on many of the organisms and some organisms showed abnormal vesicular growths or blebs at their posterior ends. Some mortality was noted in culture by day 5, but most organisms were still alive when the cultures were terminated on day 7.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.11
• /
• pp.589-595
• /
• 2016

This study evaluated the environmental impacts for landfill treatment of the wastewater treatment sludge (WTS) from petrochemical firms by life cycle assessment (LCA) and reviewed the impact reduction by landfill gas (LFG) utilization. The functional unit was 'landfill of 1 ton of WTS', and the system boundary included the process of input and treatment for WTS in landfill site. The impacts were high at landfill process (LP) and leachate treatment process (LTP). Global warming (GWP) and photochemical oxidants creation (POCP) were high at LP, while abiotic depletion (ADP), acidification (AP), eutrophication (EP), ozone depletion (ODP) were high at LTP. The major substances of various impact categories were crude oil (ADP), $NO_X$ (AP, EP), $CH_4$ (GWP, POCP), $Cl_2$ (ODP), respectively. The major factor of ADP, AP, EP was attributed from the generation of electricity used in LTP, and the methane within uncollected LFG was main factor of GWP and POCP. Therefore, electricity consumption reduction is identified to be an impact improvement option, and the flaring system installation or enhanced LFG recovery could be an alternative to reduce impacts. Among the various categories, GWP accounted the highest impact (${\geq}90%$) followed by ADP, POCP. In the avoidance impact resulted from the utilization of LFG, to substitute B-C oil or LNG showed the impact reduction of 32.7% and 12.0%, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.12
• /
• pp.867-876
• /
• 2013

To promote the carbon emission trading scheme and reduce greenhouse gas (GHG) emission as following 'Korean GHG & Energy Target Management System', GHG emissions should be accurately determined in each industrial sector. For the estimation method of GHG emission from waste landfill, there are several error parameters, therefore we reviewed the estimation method and proposed a revised method. Methane generation from landfill must be calculated by the selected method based on methane recovery rate, 0.75. However, this methodology is not considered about uncertainty factor. So it is desirable that $CH_4$ generation is estimated using first order decay model and methane recovery should use field monitoring data. If not, $CH_4$ recovery could be applied from other study results; 0.60 of operational landfill with gas vent and flaring system, 0.65 of operational site with landfill gas recovery system, 0.90 of closed landfill with final cover. Other parameters such as degradable organic carbon (DOC) and fraction of DOC decompose ($DOC_f$) need to derive the default value from studies to reflect a Korean waste status. Proper application of MCF that is selected by operation and management of landfill requires more precise criteria.

• Microbiology and Biotechnology Letters
• /
• v.37 no.4
• /
• pp.293-305
• /
• 2009

Methane, as a greenhouse gas, is some 21~25 times more detrimental to the environmental than carbon dioxide. Landfills generally constitute the most important anthropogenic source, and methane emission from landfill was estimated as 35~73 Tg per year. Biological approaches using biocover (open system) and biofilter (closed system) can be a promising solution for older and/or smaller landfills where the methane production is too low for energy recovery or flaring and installation of a gas extraction system is inefficient. Methanotrophic bacteria, utilizing methane as a sole carbon and energy source, are responsible for the aerobic degradation (oxidation) of methane in the biological systems. Many bench-scale studies have demonstrated a high oxidation capacity in diverse filter bed materials such as soil, compost, earthworm cast and etc. Compost had been most often employed in the biological systems, and the methane oxidation rates in compost biocovers/boifilters ranged from 50 to $700\;g-CH_4\;m^{-2}\;d^{-1}$. Some preliminary field trials have showed the suitability of biocovers/biofilters for practical application and their satisfactory performance in mitigation methane emissions. Since the reduction of landfill methane emissions has been linked to carbon credits and trading schemes, the verified quantification of mitigated emissions through biocovers/biofilters is very important. Therefore, the assessment of in situ biocovers/biofilters performance should be standardized, and the reliable quantification methods of methane reduction is necessary.