• 에너지공학
• /
• 제10권4호
• /
• pp.379-386
• /
• 2001

본 연구는 산업용 고부하 버너연소에서의 NO$_{x}$ 저감에 관한 실험적 연구이다. 본 연구에서는 NO$_{x}$의 정량적 농도 분포 측정을 위하여 레이저 유동 형광법을 사용하였다. XeCL 엑시머 레이저를 사용하여 NO A-X (0, 0) 진동밴드를 226 nm로 여기하였다. 또한 P$_{21}$+Q$_1$(14.5)/R$_{12}$+Q$_2$(20.5)/P$_1$(23.5) 전이를 여기라인으로 하였으며 다른 간섭의 영향을 최소화 하였다. 본 실험에서 이중선회 확산화염에서의 NO 농도 분포를 측정하였으며, 이 스월버너에서의 화염의 후류에 있어서 NO 농도는 1차/2차 공기비가 증가할 때 감소함을 알수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제29권5호
• /
• pp.512-522
• /
• 2018

This study was conducted to investigate on the combustion characteristic with the effects of mat thickness and fuel kinds in a metal-fiber burner. The mode transition point is confirmed by the K value, which was defined as the rate of flow velocity and laminar burning velocity. The ($T^4_{sur}-T^4_{\infty}$) is highest at methane flame with 3 T thickness. Through the measurement of the unburned mixture temperature, the possibility of submerged flame in surface combustion burner was confirmed. The rapid emission of CO occurs nearby limit blow out (LBO) because of the increase of flow velocity. In case of NOx, the trend is similar with surface temperature. However, it also considered that the NOx emission is affected by residence time with flame position.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.94-97
• /
• 2002

BSCCO (2223) compound which has the highest temperature of transition to the superconducting state in the homologous series considered is synthesized by SHS. The method exploits self-sustaining solid-flame combustion reactions which develop very high internal material temperatures over short periods. This report introduces the SHS method and its advantages and discusses its application in the synthesis of superconducting materials.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.156-161
• /
• 2000

In this study, quantitative nitric oxide concentration distributions are investigated in the post-flame zone of laminar premixed $CH_4/O_2/N_2$, flames by laser-induced fluorescence (LIF). The measurements are taken in flames for different equivalence ratios varying from $0.8{\sim}1.4$, and flow rate is fixed as 5slpm. The NO A-X (0,0) vibrational band around 226 nm is excited using a XeCl excimer-pumped dye laser. Selecting an appropriate NO transition minimizes interferences from Rayleigh scattering and $O_2$ fluorescence. NO concentration is rised when equivalence ratios increase at different vertical distances form nozzle tip. In any case, the maximum NO concentration reaches the maximum in reaction zone.

• 대한기계학회논문집B
• /
• 제33권3호
• /
• pp.186-193
• /
• 2009

In this article, the effect of silica addition on the phase transformation characteristics of $TiO_2$ nanoparticles synthesized by using an $O_2$-enriched coflow, hydrogen, diffusion flame was investigated. TTIP(titanium tetra-isopropoxide) and TEOS(tetraethyl-orthosilicate) were used as precursors for $TiO_2$ and $SiO_2$ nanoparticles, respectively. Based on the results from TEM and XRD analysis, it is believed that the silica addition on the flame synthesis of $TiO_2$ nanoparticles reduces the particle size distribution and raises the temperature of the phase transition from anatase to rutile. But the reduced sizes of the synthesized particles due to the silica addition made the sintering and phase transformation of particles more easily.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1989-1998
• /
• 1995

Characteristics of the flame propagation for normal and abnormal combustion in hydrogen premixture in a cylindrical constant-volume combustion chamber are studied numerically. A detailed hydrogen oxidation kinetic mechanism, mixture transport properties and a model describing spark ignition process are used. The calculated pressure-time history of the stable deflagration wave propagation agrees well with the experiment. The ignition of the premixture in the unburned gas, initiated by the hot spot, causes a transition from deflagration to detonation under some initial temperature and pressure. Under the initial conditions with high temperature and pressure, excessive ignition energy initiates a strong blast wave and a detonation wave that follows. The chemical reaction in the detonation wave is much more vigorous than that in the deflagration wave and the peak pressure in the detonation wave is much higher than the equilibrium value.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.231-235
• /
• 2002

A theoretical and experimental study on the combustion process in a constant volume micro combustor is described. Unlike in a macro scale constant volume combustor, the heat loss to the wall plays a major role in flame propagation in a micro micro combustor. In order to analyze the effect of heat loss on combustion phenomena, pressure transition from ignition was measured. A number of cylindrical micro combustors with different diameter and depth were used for experiment to study the effect of length scales and shape factor. The diameter of combustor ranged from 7.5mm to 22.5 mm and the height of cylinder was from 1mm to 4mm. Initial pressure was also varied for the experiment. The diagnostic methods were severely limited due to the size of the apparatus and uncertainties of certain quantities to be measured in a small-scale environment. An analytical method to derive physical quantities that are essential for performance prediction from the pressure measurements is described.

• Macromolecular Research
• /
• 제13권1호
• /
• pp.8-13
• /
• 2005

A novel silicon-containing epoxy resin, the diglycidylether of bisphenol A-silicon (DGEBA-Si), was synthesized and characterized. The properties of the DGEBA-Si epoxy resin cured with 4,4-diaminodiphenyl methane (DDM), including its cure behavior, glass transition temperature, thermal stability, and mechanical strength were investigated. The char yield of the DGEBA-Si/DDM system was higher than that of a commercial DGEBA/DDM system, indicating that the DGEBA-Si epoxy resin showed good flame-retardance. The cured DGEBA-Si/DDM specimens possessed lower glass transition temperatures and higher mechanical properties than DGEBA/DDM specimens. These features were attributed to the introduction of siloxane groups into the main chain of the epoxy resin, which resulted in the improved flexibility of the cured DGEBA-Si/DDM system.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2005년도 춘계학술강연 및 발표대회강연 및 발표논문 초록집
• /
• pp.68-69
• /
• 2005

• 한국추진공학회지
• /
• 제15권6호
• /
• pp.98-106
• /
• 2011

본 논문에서는 많은 가스터빈 산업체 및 연구기관에서 연소불안정 현상과 관련된 변수들을 예측하기 위해 가장 보편적으로 이루어지고 있는 열음향 해석 모델에 대한 기술 소개 및 최근의 연구 동향을 분석하였다. 선형 시스템 해석을 통하여 연소 불안정이 발생하는 고유 주파수 및 불안정 초기 성장률의 예측이 가능하다. 이를 위하여 정의된 시스템에서의 음향파와 열발생율 섭동간의 선형 관계식을 선형 음향 이론으로부터 유도할 수 있고, 이 관계식의 해를 구하기 위해서 가장 중요한 부분은 화염 전달 함수로부터 n-${\tau}$ 함수를 구하여 열발생율 섭동 결과에 대한 정보를 얻는 것이다. 현재까지의 연구 결과로부터 선형 특성 해석에는 상당한 진보가 이루어져 왔고, 실제 가스터빈 연소기에 적용하는 노력이 있었으나, 한계 진폭과 과도기 현상 예측을 위해서 요구되는 비선형 동적 특성 모델링 기술 개발은 현재 간단한 연소기와 버너의 적용에 머물러 있는 실정이다. 실제 복잡한 가스터빈과 같은 연소 시스템에 적용되기 위해서는 비선형 경계 조건을 고려한 시스템 동적 특성 연구와 화염의 비선형 거동을 더욱 정확히 설명할 수 있는 전달 함수에 대한 예측 기술이 선행되어야 한다.