• 정보과학회 논문지
• /
• 제42권6호
• /
• pp.755-763
• /
• 2015

버그 정정 활동은 소프트웨어 개발과 유지보수 작업에서 많은 비중을 차지하므로, 버그 정정활동에 소요되는 시간을 미리 추정할 수 있다면 소프트웨어 프로젝트 작업 계획에 큰 도움이 될 것이다. 따라서 본 연구에서는 버그 리포트를 이용하여 버그 정정 시간을 추정하는 방법을 제안한다. 본 방법에서는 먼저, 버그 리포트가 제공하는 버그 메타 필드에 k-NN 방법을 적용하여 과거 버그 리포트들을 분류한다. 다음으로, 버그 리포트의 텍스트 정보를 활용하여 과거 버그와 새로운 버그 사이의 유사도를 계산하고, 유사한 버그의 정정 시간을 활용하여 새로운 버그의 정정 시간을 추정한다. 마지막으로, 오픈 소스 프로젝트에 본 방법을 적용한 실험을 통하여 효과적으로 버그 정정 시간을 추정한다는 것을 보인다.

• 한국의류산업학회지
• /
• 제12권2호
• /
• pp.240-245
• /
• 2010

The effects of monazite and fixing agents on cotton fabric dyed with Perilla frutescens var. acuta extract were investigated. The proper monazite treatment concentration, temperature and time were 10%(o.w.b.), $50^{\circ}C$ and 60minutes. By various fixing agent treatment, $FeSO_4$ showed a relatively high K/S value and the order of K/S value decreased as follows, cation surface active agents, soybean and NaCl. And the monazite and $FeSO_4$ fixing agent showed higher anion emissity than those of untreated cotton and other fixing agents. The cotton fabrics showed improved color fastness by monazite and fixing agents treatments with the exception of light fastness. And the cotton fabrics fixed with fixing agents were showed effective bacterial reduction with the exception of NaCl.

• 대한치과보철학회지
• /
• 제46권3호
• /
• pp.261-268
• /
• 2008

STATEMENT OF PROBLEM: Detachment of the magnetic assembly from the denture base has been a problem in magnetic overdenture patients. PURPOSE: The objectives of this study were to compare the dislodging force by the fixing materials and the designs of the magnetic assembly, and to compare the effect between the fixing materials and the designs of the magnetic assembly. MATERIAL AND METHODS: Two fixing materials, Jet denture repair $acrylic^{(R)}$ and Super-$Bond^{(R)}$ C&$B^{(R)}$ and two types of magnetic assembly designed with or without wing were used. Each magnetic assembly was fixed in the chamber of the denture base resin block ($Lucitone^{(R)}$199) with each fixing material respectively. These specimens were thermocycled 2,000 cycles in the water held at $4^{\circ}C$ and $60^{\circ}C$ with a dwell time of 1 min each time. Each specimen was seated in a testing jig and then a push-out test was performed with a universal testing machine at a cross head speed of 0.5 mm/min to measure the maximum dislodging forces. RESULTS: Comparing the fixing materials, Super-Bond C&$B^{(R)}$ showed superior dislodging force than Jet denture repair $acrylic^{(R)}$. Comparing the design of the magnetic assemblies, the wing design magnetic assembly showed better dislodging force. Combination of the Super-Bond C&$B^{(R)}$ as a fixing material and wing design magnetic assembly revealed a greatest dislodging force. The kind of fixing material was more influential than the type of magnetic assembly. CONCLUSION: The dislodging force of Super-Bond C&$B^{(R)}$ was significantly higher than Jet denture repair $acrylic^{(R)}$. And the dislodging force of magnetic assembly which have wing design was significantly higher than magnetic assembly which have no wing design.

• Journal of Pharmaceutical Investigation
• /
• 제23권1호
• /
• pp.51-53
• /
• 1993

Mucoadhesive tablets containing hydroxypropylcellulose-H (HPC) and carbopol 934 (CP) were prepared from direct compression. Their adhesive forces and water absorptions were investigated by using mouse peritoneal membrane and 1.5% agar plate, respectively. Adhesive force was significantly improved with increasing CP concentration, but was not affected by compression force and addition of disintegrants. And adhesive force to mouse peritioneal membrane was increased as fixing time increased. In conclusion, adequate adhesive force can be obtained by control of CP/HPC ratio and fixing time.

• 한국건설관리학회논문집
• /
• 제25권2호
• /
• pp.69-80
• /
• 2024

Currently rebar spacing inspection is carried out by human inspectors who heavily rely on their individual experience, lacking a guarantee of objectivity and accuracy in the inspection process. In addition, if incorrectly placed rebars are identified, the inspector need to correct them. Recently, laser scanning and AR technologies have been widely used because of their merits of measurement accuracy and visualization. This study proposes a technology for rebar spacing inspection and fixing by combining laser scanning and AR technology. First, scan data acquisition of rebar layers is performed and the raw scan data is processed. Second, AR-based visualization and fixing are performed by comparing the design model with the model generated from the scan data. To verify the developed technique, performance comparison test is conducted by comparing with existing drawing-based method in terms of inspection time, error detection rate, cognitive load, and situational awareness ability. It is found from the result of the experiment that the AR-based rebar inspection and fixing technology is faster than the drawing-based method, but there was no significant difference between the two groups in error identification rate, cognitive load, and situational awareness ability. Based on the experimental results, the proposed AR-based rebar spacing inspection and fixing technology is expected to be highly useful throughout the construction industry.

• 전자공학회논문지SC
• /
• 제41권4호
• /
• pp.39-43
• /
• 2004

능동적인 비전 시스템의 전형적인 한 테마는 카메라의 시선 고정 문제이다. 여기서 카메라의 시선 고정이란 동적인 물체 상의 지정된 한 점이 항시 이미지의 중앙부에 놓이도록 카메라의 자세를 조정하는 것으로서, 이를 위해서는 카메라에 비친 영상정보를 분석하는 기능과 카메라의 자세를 제어하는 두 가지 기능이 결합되어야 한다. 본 논문에서는 영상분석과 자세제어가 한 개의 프레임 하에서 설계되는 카메라의 시선 고정을 위한 알고리즘을 제안한다. 이 때 제작시의 어려움을 피하고 실시간 응용을 위해서 본 알고리즘은 카메라의 calibration이나 3차원 거리 정보의 복원을 필요로 하지 않도록, 그리고 닫힌 형태(closed-form)가 되도록 설계된다.

• 치과방사선
• /
• 제22권1호
• /
• pp.128-136
• /
• 1992

This study was undertakened to investigate the change of image characteristics on dental films according to the process of using time of processing solution in automatic processor. Base + fog density, film density and subject contrast were measured with the digital densitometer, the pH of developing and fixing solution were measured with Digital pH / ION Meter. The following results were obtained: 1. Base + fog density was increased with the process of using time of the processing solution and was over the maximum permissible base + fog density 0.25 from the 3rd day. 2. Film density was increased with the process of using time of the processing solution. 3. Subject contrast was decreased with the process of using time of the processing solution. 4. The pH of the developing solution was decreased with the process of using time, the pH of the fixing solution was increased.

• Journal of Microbiology and Biotechnology
• /
• 제21권6호
• /
• pp.590-598
• /
• 2011

Bacterial assimilation of $CO_2$ into stable biomolecules using electrochemical reducing power may be an effective method to reduce atmospheric $CO_2$ without fossil fuel combustion. For the enrichment of the $CO_2$-fixing bacteria using electrochemical reducing power as an energy source, a cylinder-type electrochemical bioreactor with a built-in anode compartment was developed. A graphite felt cathode modified with neutral red (NR-graphite cathode) was used as a solid electron mediator to induce bacterial cells to fix $CO_2$ using electrochemical reducing power. Bacterial $CO_2$ consumption was calculated based on the variation in the ratio of $CO_2$ to $N_2$ in the gas reservoir. $CO_2$ consumed by the bacteria grown in the electrochemical bioreactor (2,000 ml) reached a maximum of approximately 1,500 ml per week. Time-coursed variations in the bacterial community grown with the electrochemical reducing power and $CO_2$ in the mineral-based medium were analyzed via temperature gradient gel electrophoresis (TGGE) of the 16S rDNA variable region. Some of the bacterial community constituents noted at the initial time disappeared completely, but some of them observed as DNA signs at the initial time were clearly enriched in the electrochemical bioreactor during 24 weeks of incubation. Finally, Alcaligenes sp. and Achromobacter sp., which are capable of autotrophically fixing $CO_2$, were enriched to major constituents of the bacterial community in the electrochemical bioreactor.

• 디지털융복합연구
• /
• 제12권11호
• /
• pp.373-378
• /
• 2014

방위탐지기술은 위치표정 정확도를 높이기 위해서 매우 중요하다. 도착시간차(TDOA) 방위탐지 방식은 정확도가 매우 높은 기술이며 1990년대부터 고주파신호 방위탐지에 사용되었다. TDOA 방식은 송신기에서 송신된 신호가 거리가 다른 위치에 있는 두 개의 수신기에 도착하는 시간차를 이용하여 송신기의 방위를 측정하는 방식으로서 수신신호의 신호대잡음비(SNR)와 안테나 기준선이 방위탐지 정확도에 매우 큰 영향을 미치며, 본 논문에서는 SNR과 안테나 기준선에 대한 방위각 정확도와 위치표정 정확도를 모사하였다. 기준선의 길이가 50m이고 SNR이 40dB 이상이면, 입사방위각 $0^{\circ}$에서 약 $0.51^{\circ}$의 방위탐지 정확도를 얻었다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.613-616
• /
• 2000

This paper considers the problem of subway crew scheduling. Crew scheduling is concerned with finding a minimum number of assignments of crews to a given timetable satisfying various restrictions. Traditionally, crew scheduling problem has been formulated as a set covering or set partitioning problem possessing exponentially many variables, but even the LP relaxation of the problem is hard to solve due to the exponential number of variables. In this paper, we propose two basic techniques that solve the problem in a reasonable time, though the optimality of the solution is not guaranteed. To reduce the number of variables, we adopt column-generation technique. We could develop an algorithm that solves column-generation problem in polynomial time. In addition, the integrality of the solution is accomplished by variable-fixing technique. Computational results show column-generation makes the problem of treatable size, and variable fixing enables us to solve LP relaxation in shorter time without a considerable increase in the optimal value. Finally, we were able to obtain an integer optimal solution of a real instance within a reasonable time.