• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.6
• /
• pp.109-116
• /
• 2005

Recently, images/videos have been preferred as the communication media because of their information-implication and easy recognizability. But the amount of their data is so large that it has been the major research area to compress their data. This paper is related to optimization in th image data format, which can make a great effect in performance of data compression and is based on the wavelet transform and JPEG2000. This paper established a criterion to decide the data format to be used in wavelet transform, which is on the bases of the data errors in frequency transform and quantization. This criterion has been used to extract the optimal data format experimentally. The result were(1, 9) of 10-bit fixed-point format for filter coefficients and (9, 7) of 16-bit fixed-point data dormat for wavelet coefficients and their optimality was confirmed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.38-39
• /
• 2019

Optimal route planning is the route planning to minimize voyage time or fuel consumption in a given ocean environment. Unlike the previous studies on weather routing, this study proposes an optimization method for the route planning to avoid the grounding risk in the coast. The route way-points were searched using Dijkstra algorithm, and then the optimization was performed to minimize fuel consumption by setting the optimization design parameter to the engine rpm. To set the engine rpm, a method to use the fixed rpm from the departure point to the destination point, and a method to use the rpm for each section by dividing the route were used. The ocean environmental factors considered for route planning were wind, wave, and current, and the depth information was utilized to compute grounding risk. The proposed method was applied to the ship passing between Mokpo and Jeju, and then it was confirmed that fuel consumption was reduced by comparing the optimum route and the past navigated route.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7C
• /
• pp.962-970
• /
• 2004

This paper presents an efficient implementation of the 2.4 kbps EHSX(Enhanced Harmonic Stochastic Excitation) speech coder on a TMS320C6701$^{TM}$ floating-point digital signal processor. The EHSX speech codec is based on a harmonic and CELP(Code Excited Linear Prediction) modeling of the excitation signal respectively according to the frame characteristic such as a voiced speech and an unvoiced speech. In this paper, we represent the optimization methods to reduce the complexity for real-time implementation. The complexity in the filtering of a CELP algorithm that is the main part for the EHSX algorithm complexity can be reduced by converting program using floating-point variable to program using fixed-point variable. We also present the efficient optimization methods including the code allocation considering a DSP architecture and the low complexity algorithm of harmonic/pitch search in encoder part. Finally, we obtained the subjective quality of MOS 3.28 from speech quality test using the PESQ(perceptual evaluation of speech quality), ITU-T Recommendation P.862 and could get a goal of realtime operation of the EHSX codec.c.

• Journal of Korea Water Resources Association
• /
• v.33 no.6
• /
• pp.783-791
• /
• 2000

A multidimensional representation for precipitation, given In the theory proposed by E. Waymire et al. (1984), is used for simulating rainfall in space and time. The model produces moving storms with realistic meso-scale meteorological features in time and space. The first- and second-order statistics derived from observed JX)int gauge data were used to estimate the model parameters based on the Nelder-Mead algorithm of optimization. Then twelve-year traces of rainfall intensities at fixed gage stations were generated at intervals of 1 hours. First- and second-order statistics are evaluated from the above series, which are used for estimating the parameters of one dimensional model of temporal rainfall at a point. As a result from the comparisons of one dimensional model parameters used observed and generated data from multidimensional model, we found that the multidimensional rainfall model generated visually realistic spatial patterns of rainfall as well as realistic temporal hyetographs of rainfall at a point. point.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.3
• /
• pp.149-155
• /
• 2007

In this paper, we propose an real-time implementation of JPEG2000 codec on the ARM9 processor. The implemented codec is designed to separate control codes from data management codes in order to use effectively the system resources such as processor and memory. Especially, in embedded situations like cellular phones it is very important to provide good services using limited processor and internal memory. Since ARM9 series processors do not provide floating-point, large amount of computational time is required to perform the operation which needs highly repetitive floating-point computations like DWT(discrete wavelet transform). The proposed codec was programed using fixed-point to overcome this weakness. Also code optimization considering cache memory was applied to further improve the computational speed.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.19-23
• /
• 2001

DSP-based implementation is pervasive in wireless communication parts for systems and handsets according to developing high-speed and low-power programmable Digital Signal Processor (DSP). In this paper, we present a real-time implementation of multi-channel Adaptive Multi-rate (AMR) speech coder. The real-time implementation of an AMR algorithm is achieved using 32-bit fixed-point TMS320C6202 DSP chip that operates at 250 MHz. We performed cross compile, linear assembly optimization and TMS320C62xx assembly optimization for real-time implementation. Furthermore, speech data input/output function and communication function with external CPU is included in an AMR speech coder. The AMR Speech coder developed using DSP EVM board was evaluated in ETRI IMT-2000 Test-bed system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.32-39
• /
• 2004

Biological neurons generally have chaotic characteristics for permanent or transient period. The effects of chaotic response of biological neuron have not yet been verified by using analytical methods. Even though the transient chaos of neuron could be beneficial to overcoming the local minimum problem, the permanent chaotic response gives adverse effect on optimization problems in general. To solve optimization problems, which are needed in almost all neural network applications such as pattern recognition, identification or prediction, and control, the neuron should have one stable fixed point. In this paper, the dynamic characteristics of the chaotic dynamic neuron and the condition that produces the chaotic response are analyzed, and the convergence conditions are presented.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.7
• /
• pp.648-655
• /
• 2002

This paper describes implementation of a multi-channel G.723.1 Annex A (G.723.1A) focused on code optimization using a high performance general purpose Digital Signal Processor (DSP), To implement a multi-channel G.723.1A functional complexities of the ITU-T G.723.1A fixed-point C-code are measures an analyzed. Then we sort and optimize C functions in complexity order. In parallel with optimization, we verify the bit-exactness of the optimized code using the ITU-T test vectors. Using only internal memory, the optimized code can perform full-duplex 17 channel processing. In addition, we further increase the number of available channels per DSP into 22 using fast codebook search algorithms, referred to as bit -compatible optimization.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.91-98
• /
• 2008

Domestic standard for Korean T-DMB includes MPEG-4 BSAC (Bit Sliced Arithmetic Coding) audio coding that has been established in 2003. This paper presents an implementation and optimization of MPEG-4 BSAC Audio Decoder on ARM926EJ-S processor. Tools and modules of the BSAC audio decoder were implemented with 32-bit fixed point operations. Further optimization was accomplished using ARM926EJ-S Inline Assembly. The optimization was based on the total number of multiplications and MAC (Multiply and Accumulation) operations causing most of core cycles of ARM926EJ-S, and also based on analysis of ARMv5 instructions. The result of optimization was evaluated on the basis of MIPS (Million Instruction per second). Implementation results show that BSAC bitstream at 96kbps can be decoded in real-time at 65MHz CPU clocks.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.5
• /
• pp.552-560
• /
• 2013

In this paper, an optimization algorithm for the block assembly accuracy control assessment is proposed with consideration for the current block assembly process and accuracy control procedure used in the shipbuilding site. The objective function of the proposed algorithm consists of root mean square error of the distances between design and measured data of the other control points with respect to a specific point of the whole control points. The control points are divided into two groups: points on the control line and the other points. The grouped data are used as criteria for determining the combination of 6 degrees of freedom in the registration process when constituting constraints and calculating objective function. The optimization algorithm is developed by using combination of the sampling method and the point to point relation based modified ICP algorithm which has an allowable error check procedure that makes sure that error between design and measured point is under allowable error. According to the results from the application of the proposed algorithm with the design and measured data of two blocks data which are verified and validated by an expert in the shipbuilding site, it implies that the choice of whole control points as target points for the accuracy calculation shows better results than that of the control points on the control line as target points for the accuracy of the calculation and the best optimized result can be acquired from the accuracy calculation with a fixed point on the control line as the reference point of the registration.