• 한국통신학회논문지
• /
• 제36권9A호
• /
• pp.801-808
• /
• 2011

본 논문은 무선랜 메쉬 네트워크 링크 품질 측정 정확성 향상을 위한 MBAP(Multi-rate Broadcast Active Probing) 방법을 제안한다. 라우팅을 위한 척도로 홉수를 주로 사용하는 MANET과 달리 메쉬 네트워크는 ETX, ETT 등의 링크 품질 기반의 척도를 주로 사용한다. ETX. ETT 등의 측정을 위해 기존 연구들에서는 단일 전송률 브로트캐스트 기반의 측정 방법을 사용한다. 하지만 이 방법은 다양한 전송률을 가질 수 있는 무선랜 링크의 품질을 제대로 반영하지 못하며 이는 적절하지 못한 경로 선택으로 귀결될 수 있다. MBAP는 다양한 전송률의 브로드캐스트를 사용함으로써 우선 링크 품질 측정의 정확성을 향상시켰다. 우리는 MBAP를 리눅스 기반의 링크계층에서 구현하였으며 실험을 통해 그 효용성을 검증하였다.

• Journal of International Society for Simulation Surgery
• /
• 제3권1호
• /
• pp.36-38
• /
• 2016

Fibrous dysplasia is a relatively rare disease but the management would be quite challenging. Because this is not a malignant tumor, the preservation of the facial contour and the various functions seems to be important in treatment planning. Until now the facial bone reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for facial bone reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile, various types of allogenic and alloplastic materials have been also used. However, facial bone reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original maxillary anatomy as possible using the 3D printing model, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we molded Titanium mesh to reconstruct three-dimensional maxillary structure during the operation. This prefabricated Titanium-mesh implant was then inserted onto the defected maxilla and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be successful in this patient. Individualized approach for each patient could be an ideal way to restore the facial bone.

• 한국산업보건학회지
• /
• 제6권1호
• /
• pp.97-108
• /
• 1996

A new type of passive samplers were designed and produced by authors. After evaluating the quality of activated carbon by measuring recovery rate of organic vapors and steadiness of sampling rate, activated carbon with 30 - 35 mesh produced by Company S in Korea was selected. In each passive sampler, an amount of 400 mg of the activated carbon was filled in 25-mm cassette and covered by fixed screen (or wire screen with 100 mesh). In addition to the fixed screen, a wind screen (or wire screen with 300 mesh) was also attached at outer face. The sampling rate of the new Korean passive samplers was estimated Conclusions obtained in the study are as follows. 1. Sampling rates of the newly developed Korean passive samplers were affected by sampling time. For n-hexane, sampling rates of 15- and 60-minute samples were 70.92 and 37.45 ml/min, respectively. Sampling rate of both 200- and 450-minute samples was 25.96 ml/min. It is concluded that, when passive samplers are used for measuring organic vapors, samples be collected longer than 60 minutes. 2. Sampling rate of the passive samplers was also affected by airborne concentration of organic vapors. Lower sampling rates were determined at level of 1/2 threshold limit values (TLVs) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH). It is recommended that sampling rate of the passive samplers be obtained at site by measuring concentrations using both the NIOSH Method and passive samplers simultaneously. 3. When the passive samplers, which collected organic vapors, were exposed to clean air for five hours, there was no significant loss of organic vapors due to reverse diffusion. 4. When samples were stored at room temperature ($21.8{\pm}0.7^{\circ}C$) and refrigerator ($3.8{\pm}0.7^{\circ}C$), there was no significant difference in the accuracy of results. For trichloroethylene and n-hexane, accuracies were within 25 % at both temperatures until seven days. However, poor accuracy exceeding 25 % was indicated in toluene from the first day. It is recommended that samples be stored at freezing temperature below $0^{\circ}C$. 5. Sampling efficiency was significantly affected by direction of the passive samplers. Results of samplers facing wind and down, respectively, were compared. Lower amount of organic vapors were collected when the sampler was oriented down. It is recommended that, when air velocity is low in plants, the passive samplers be oriented to the wind. However, when air velocity is high, the passive samplers be oriented down.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.181-195
• /
• 2020

본 연구는 평로탄화로 이용한 성형목탄 제조과정에서 얻은 탄화된 바이오매스의 특성을 분석하였으며, 기계적 전처리 및 평로탄화로 내 위치에 따른 특성 차이를 비교하고자 하였다. 성형목탄 제조업체에서 채취된 바이오매스 1종과 탄화 바이오매스 5종의 시료를 대상으로 선별(screening) 및 분쇄(grinding)를 통해 분석시료의 입자크기 범위별로 분류한 후, 고정탄소, 회분, 휘발성 화합물, 원소 함량, 발열량을 측정하였다. 실험 결과, 평로탄화로의 위치에 따라서는 중간층의 탄화 바이오매스 발열량이 20.4 MJ/kg으로 가장 높은 연료적 특성을 나타내었다. 선별 입자 크기에 따라서는 100 mesh 이하의 탄화 바이오매스에서 회분함량이 가장 낮았고 발열량, 탄소 함량, 고정탄소 함량은 높았다. 상관관계 분석 결과 회분 함량은 발열량, 휘발성화합물, 고정탄소, 탄소 함량과 모두 음의 상관관계를 나타내어 회분 함량이 연료적 특성에 부정적인 영향을 미치는 것을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.281-286
• /
• 2009

The proposed technique uses cyclic frame structure, where three periods such as beacon period (BP), mesh contention access period (MCAP) and slotted period (SP) are in a data frame. This paper studies on a mechanism to allow communication nodes (6lowpan) in a PAN with different logical channel for global healthcare applications monitoring technology. The proposed super framework structure system has installed 6lowpan sensor nodes to communicate with each other. The basic idea is to time share logical channels to perform 6lowpan sensor node. The concept of 6lowpan sensor node and various biomedical sensors fixed on the patient BAN (Body Area Network) for monitoring health condition. In PAN (hospital area), has fixed gateways that received biomedical data from 6lowpan (patient). Each 6lowpan sensor node (patient) has IP-addresses that would be directly connected to the internet. With the help of IP-address service provider can recognize or analyze patient data from all over the globe by the internet service provider, with specific equipments i.e. cell phone, PDA, note book. The NS-2.33 result shows the performance of data transmission delay and data delivery ratio in the case of hop count in a PAN (Personal Area Networks).

• The Journal of Advanced Prosthodontics
• /
• 제12권2호
• /
• pp.67-74
• /
• 2020

PURPOSE. This study evaluated the influence of prosthesis weight and number of implants on the bone tissue microstrain. MATERIALS AND METHODS. Fifteen (15) fixed full-arch implant-supported prosthesis designs were created using a modeling software with different numbers of implants (4, 6, or 8) and prosthesis weights (10, 15, 20, 40, or 60 g). Each solid was imported to the computer aided engineering software and tetrahedral elements formed the mesh. The material properties were assigned to each solid with isotropic and homogeneous behavior. The friction coefficient was set as 0.3 between all the metallic interfaces, 0.65 for the cortical bone-implant interface, and 0.77 for the cancellous bone-implant interface. The standard earth gravity was defined along the Z-axis and the bone was fixed. The resulting equivalent strain was assumed as failure criteria. RESULTS. The prosthesis weight was related to the bone strain. The more implants installed, the less the amount of strain generated in the bone. The most critical situation was the use of a 60 g prosthesis supported by 4 implants with the largest calculated magnitude of 39.9 mm/mm, thereby suggesting that there was no group able to induce bone remodeling simply due to the prosthesis weight. CONCLUSION. Heavier prostheses under the effect of gravity force are related to more strain being generated around the implants. Installing more implants to support the prosthesis enables attenuating the effects observed in the bone. The simulated prostheses were not able to generate harmful values of peri-implant bone strain.

• 소성∙가공
• /
• 제8권4호
• /
• pp.331-339
• /
• 1999

In this study, to analyze the shaped drawing process from round bar, the practical conical die with considering die radius and bearing was defined by a mathematical expression, and also a simple technique for initial mesh generation to the shaped drawing process was proposed. The drawing of rectangular section from round bar, one of the shaped drawing process, has been simulated by using non-steady state 3D rigid plastic finite element method in order to evaluate the influence of semi-die angle and reduction in area to corner filling. Other process variables such as friction constant, rectangular ratio, die radius and bearing length were fixed during the simulation. An artificial neural network has been introduced to obtain the optimal process conditions which gave rise to a fast simulation.

• Structural Engineering and Mechanics
• /
• 제23권3호
• /
• pp.217-232
• /
• 2006

A crack model for the fracture in concrete based on meshless method is proposed in this paper. The cracks in concrete are classified into micro-cracks or macro-cracks respectively according to their widths, and different numerical approaches are adopted for them. The micro-cracks are represented with smeared crack approach whilst the macro-cracks are represented with discrete cracks that are made up with additional nodes and boundaries. The widely used meshless method, Element-free Galerkin method, is adopted instead of finite element method to model the concrete, so that the discrete crack approach is easier to be implemented with the convenience of arranging node distribution in the meshless method. Rotating-Crack-Model is proved to be preferred over Fixed-Crack-Model for the smeared cracks of this composite crack model due to its better performance on mesh bias. Numerical examples show that this composite crack model can take advantage of the positive characteristics in the smeared and discrete approaches, and overcome some of their disadvantages.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1682-1684
• /
• 2001

In removing the flue-gas using electrical discharge method, it is important to dissociate or ionize the atoms and molecules by the collisions with energetic electrons and it produces the radicals that are used to decompose the pollutants. For that purpose, a bidirectional pulsed voltage is used to produce lots of energetic electrons efficiently and increase the power efficiency. The simulation is performed with changing the pulsewidth under the fixed applied voltage. The particle-mesh model coupling the NGP(nearest-grid-point) to FEM(finite element method) is used to simulate the behavior of electrons and the spatio-temporal variation of the electric field for the streamer in discharge tube.

• 천문학회보
• /
• 제42권1호
• /
• pp.31.2-31.2
• /
• 2017

The central regions of barred-spiral galaxies contain interesting gaseous structures such as dust lanes and nuclear rings with intense star formation. While our previous studies were useful in understanding the formation of these structures star formation history, they were limited to 2D isothermal galaxies in which the stellar disk and halo are modeled by fixed gravitational potentials. To study the effects of bar growth as well as the vertical dimension, we use the mesh-free hydrodynamic code named GIZMO and run 3D simulations by treating the stellar disk and halo as being live. We find that the new 3D models form the gaseous features similarly to the previous 2D models, although the detailed formation processes are quite different. For example, a ring has a large radius when it first forms and shrinks over time in the previous 2D models. In the 3D live-potential models, however, a ring forms small and grows in size with time. We present the results of the new simulations and discuss them in comparison with the previous 2D results.