• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.201-204
• /
• 2005

Twofish is a 128-bit block cipher that accepts a variable-length key up to 256 bits. The cipher is a 16­round Feistel network with a bijective F function made up of four key-dependent 8-by-8-bit S-boxes, a fixed 4­by-4 maximum distance separable matrix over Galois Field$(GF (2^8)$, a pseudo-Hadamard transform, bitwise rotations, and a carefully designed key schedule. In this paper, the Twofish is modeled in VHDL and simulated. Hardware implementation gives much better performance than software-based approaches.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.153-158
• /
• 1995

Finding shortest paths in networks is the fundamental problem in network theory and has numerous in Operations Research and related fields. The purpose of this study is to present a algorithm for solving the length of the shortest paths from a fixed node in a general network in which the arc distance can be arbitrary value. This algorithm has a worst computational bound of $n^3/4$ additions and $n^3/4$ comparisons, which is lower the worst computational bounds of other available algorithms.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.132-137
• /
• 1997

In this study, the effect of load torque on the synchronous whirling of a rotor system has been studied analytically. Results show that the critical value of load torque to damping exists above which synchronous response decreases with increasing load torque. It has been also shown that the synchronous whirling amplitudes are more sensitive to the value of eccentricity and the ratio of disk radius to shaft length of the rotor system than other design parameters for a fixed value of load torque.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2007년도 춘계학술발표대회
• /
• pp.1294-1296
• /
• 2007

The IEEE 802.11 DCF forces neighboring nodes of an active transmitter to switch into inactive state. This conservative nature brings frame latency at transmitter neighborhood. This work exploits the IEEE 802.11n Frame Aggregation scheme to allow simultaneous transmissions from nodes that are neighbors to each-other. This is accomplished by the synchronization of control and data transmissions in slots of fixed length. Proposed scheme reduces the frame latency and improves aggregated network throughput.

• 대한치과보철학회지
• /
• 제47권2호
• /
• pp.99-107
• /
• 2009

연구목적: 악구강계의 건강을 심미적, 기능적으로 유지 및 증진시키는 것을 목적으로 치아의 형태 이상이나 결손 등을 갖고 있는 환자들에게 고정성 보철 술식이 보편적으로 시술되어 오고 있다. 환자 스스로의 관리 부족과 더불어 부적절한 기공 과정으로 인해 보철물과 연관된 합병증이 발생할 수 있다. 이를 해결하고자 고정성 보철물의 장기간의 임상 상태 조사에 많은 노력을 기울여 왔으나 자료 수집에 어려움이 많았다. 이에 본 연구에서는 고정성 보철물의 임상적 상태를 조사하여 보철물의 치료 계획과 생존율을 높이는 guideline에 기여하고자 하였다. 연구 재료 및 방법: 2007년 4월에서 9월까지 6개월간 부산대학교병원 치과 보철과에 내원한 초진 환자 중 고정성 보철물을 장착하여 사용 중인 환자를 대상으로 보철물과 관련한 종합적인 상태를 조사하였다. 결과 및 결론: 1. 전체 고정성 보철물의 추정 수명은 10.0년이었고, 평균 장착 기간은 $8.6{\pm}0.6$년이었다. 2. 부위별 추정 수명은 차이가 없었으나(P>.05), 성공률은 하악과 구치부 보철물에서 높았고(P<.05), 전치-구치 혼합형 보철물에서는 실패율이 높았다(P<.05). 3. 재료별 추정 수명은 금속관이 14.0년으로 가장 길었고, 금합금관(10.0년), 귀금속 도재관(10.0년), 비귀금속 도재관(8.0년) 순이었다(P<.05). 그러나 금속관은 실패율이 높았고, 성공률은 금합금관과 귀금속 도재관에서 높았다. 4. 크기별 추정 수명은 차이를 보이지 않았으나(P>.05), 성공률은 단일관에서 높았고(P<.05), 실패율은 3-유닛 이상에서 높았다(P<.05). 5. 대합치 조건별 추정 수명은 차이가 없었으나(P>.05), 고정성 및 가철성 국소 의치가 대합치인 경우 실패율이 높았고, 자연치일 경우 성공률이 높았다(P<.05). 6. 고정성 보철물의 합병증은 치아 우식증(23.0%), 치주 질환(19.3%), 치수 질환(16.9%) 순이었고, 기계적 문제점은 변연 결함(28.2%), 보철물 파절(6.7%), 유지력 상실(4.8%) 순이었다. 보철물을 제거한 후 잔존 치질은 고정성 보철물의 합병증으로 인하여 30.1%가 수복 불가능한 상태였다.

• 대한물리의학회지
• /
• 제8권3호
• /
• pp.425-431
• /
• 2013

PURPOSE: The purpose of this study was to examine the effect of visual control on gait speed and balance in patients with stroke. Static balance and gait speed were investigated with comparison and fixed direction of visual. METHODS: We included twenty-six patients with stroke. Participants were measured static balance while standing on a forceplate with one of 4 different visual direction in front, floor, non-affected side and affected side for 30 seconds. To compare of the gait speed, participants had to walk with one of fixed visual direction. And to compare of gait speed with visual dispersion, gait speed were measured with visual change in left and right, up and down direction every 5m, 2m and 1m intervals. RESULTS: The result of the static balance with fixed visual showed that the affected side and the non-affected side were shown significantly increased sway of total sway length, mediolateral distance, anteroposterior distance, average velocity(p<.05). The gait speed with fixed visual showed that affected side was significantly slower(p<.05). And the gait speed significantly increased as interval of visual dispersion decrease in the sagittal and horizontal plane(p<.05). CONCLUSION: The results from this study showed that the visual direction effected on static balance and the faster visual movement made to increase the gait speed. Therefore the rehabilitation training with visual control may be implemented for stroke patients.

• 대한치과교정학회지
• /
• 제44권1호
• /
• pp.20-27
• /
• 2014

Objective: The aims of this study were to evaluate the relationship between the detachment force and bonding resin surface are and to determine the resin bonding surface area that would provide adequate bonding strength with minimum resin volume. Methods: One hundred and sixty human premolars were randomly divided into 4 groups of 40 teeth each. The diameter of the resin surface area in each group was as follows: group 1, 1.5 mm; group 2, 2.5 mm; group 3, 3.5 mm; and group 4, 4.5 mm. Respond Dead Soft straight (length 0.0175 inch) was used to fabricate the retainers, and $Transbond^{TM}$ XT was used to fix the retainers to the tooth surfaces. A pair of teeth was embedded in acrylic blocks for each specimen. Thus, each group comprised 20 samples. Fixed retainers were bonded to the teeth, and vertical force was applied at the middle of wire. The force was measured using a universal testing machine. Results: The mean value of detachment force was the highest for group 4 ($102.38{\pm}2.92N$), followed by group 3 ($63.54{\pm}2.21N$), group 2 ($51.95{\pm}1.61N$), and group 1 ($24.14{\pm}1.38N$). Conclusions: The detachment force of lingual fixed retainers was significantly affected as the area of the resin bonding surface increased. Considering the minimum bonding strength of brackets, a resin bonding surface area with a diameter of 3.5 mm would provide adequate bonding strength.

• Structural Engineering and Mechanics
• /
• 제73권2호
• /
• pp.109-121
• /
• 2020

This study aims to estimate crack location and crack length in damaged beam structures using transfer matrix formulations, which are based on analytical solutions of governing equations of motion. A single variable shear deformation theory (SVSDT) that considers parabolic shear stress distribution along beam cross-section is used, as well as, Timoshenko beam theory (TBT). The cracks are modelled using massless rotational springs that divide beams into segments. In the forward problem, natural frequencies of intact and cracked beam models are calculated for different crack length and location combinations. In the inverse approach, which is the main concern of this paper, the natural frequency values obtained from experimental studies, finite element simulations and analytical solutions are used for crack identification via plots of rotational spring flexibilities against crack location. The estimated crack length and crack location values are tabulated with actual data. Three different beam models that have free-free, fixed-free and simple-simple boundary conditions are considered in the numerical analyses.

• 정보처리학회논문지C
• /
• 제13C권5호
• /
• pp.559-566
• /
• 2006

연결요청(connection request) 패킷의 전송비율을 일정 비율 이하로 제한함으로써 월 발생을 탐지하는 바이러스 쓰로틀링(virus throttling)은 대표적인 웜 조기 탐지 기술 중의 하나이다. 기존 바이러스 쓰로틀링은 비율 제한기의 주기를 고정시키고 지연 큐 길이를 감시하여 웜 발생 여부를 판단한다. 본 논문에서는 가중치 평균 지연 큐 길이를 적용하여 비율 제한기의 주기를 자율적으로 조절하는 알고리즘을 제안하고, 가중치 평균 지연 큐 길이에 따른 다양한 주기결정 기법을 제시한다. 실험결과 제안 알고리즘은 웜 탐지시간에는 크게 영향을 미치지 않으면서도 연결설정 지연시간을 단축하여 사용자가 느끼는 불편함을 줄여 줄 수 있음을 확인하였다.

• 한국농공학회지
• /
• 제19권3호
• /
• pp.4483-4491
• /
• 1977

The results obtained are as follows; 1. The variation of the temperature in a vinyl house without heating system is similar to that of air temperature in a day. The difference of maximum temperature and minimum one in a day is 27$^{\circ}C$ which is two times greater than the daily difference of air temperature. 2. When the length of the duct is increased, the high temperature zone is built up in the direction of warm air discharge from the duct, and the low temperature zone is built up in the opposite direction of warm air discharge. But, in case of the duct length is short (0.05 L), the temperature distrubution in a vinyl house become uniform. It is concluded that the shorter length of the duct, the better the distribution of the temperature in a vinyl house is. 3. When the duct is installed at high position, the high temperature zone is built up in the upper zone of the vinyl house and the low temperature zone is built up in the lower zone. And when the position of the duct is low, the rate of temperature variation along the vertical direction become high, and the direct contact of warm air with the plant in the house is occured. It is concluded that the duct should be installed at the position of slightly higher than the plant height. 4. When the fuel consumption rate is fixed at the 101/hr, the lowest temperature warming rate in the vinyl house is 5$^{\circ}C$ without regard to the air temperature.