• 제어로봇시스템학회논문지
• /
• 제22권9호
• /
• pp.759-765
• /
• 2016

This paper presents the principle, dynamics modeling and control, hardware implementation, and flight test result of a hybrid-type unmanned aerial vehicle (UAV). The proposed UAV was designed to provide both hovering and fixed-wing type aerodynamic flight modes. The UAV's flight mode transition was achieved through the attitude transformation in pitch axis, which avoids a complex rotor tilt mechanism from a structural and control viewpoint. To achieve this, a different navigation coordinate was introduced that avoids the gimbal lock in pitch singularity point. Attitude and guidance control algorithms were developed for the flight control system. For flight test purposes, a quadrotor attached with a tailless fixed-wing structure was manufactured. An onboard flight control computer was designed to realize the navigation and control algorithms and the UAV's performance was verified through the outdoor flight tests.

• 한국통신학회논문지
• /
• 제33권5C호
• /
• pp.386-394
• /
• 2008

디지털 홀로그래픽 비디오 시스템을 제작하기 위해서는 디지털 홀로그램을 가능한 빠르게 생성하는 것이 중요하다. 본 논문에서는 디지털 홀로그램의 전체 좌표를 대상으로 반복적인 가산 연산을 이용하여 Fresnel 홀로그램의 생성 속도를 높이는 알고리듬을 제안한다. 디지털 홀로그램을 계산하기 위한 3차원 객체는 컴퓨터 그래픽(computer graphic, CG)으로 제작한 깊이영상(depth-map image)을 이용하였다. 본 논문에서 제안하는 알고리듬은 부동소수점 형식의 반복가산기법을 이용하여 디지털 홀로그램의 위상을 고속으로 계산하는 기법이다. 실험결과 제안한 알고리듬은 일반적인 CGH 수식을 이용한 기법의 70%, [3]에서 제안한 기법보다 30%이상 연산속도가 빨라졌다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.708-713
• /
• 1994

A new flux observer based vector control system of an induction motor is constructed by using an observer in which the commanded stator currents are used to estimate the rotor flux. In this system, the flux observer is formulated by using a model of induction motor in a stationary coordinate system. By considering an observer of induction motor in a fixed co-ordinate system located on its secondary flux, a slip frequency controlled type of vector control system is also proposed. From these control schemes, the relation between the conventional slip frequency controlled type system and the observer based one is clarified. The steady-state error of the developed torque which is caused by the parameter change of induction motor is analyzed and discussed for the selection of observer gains. The poles of the observer error dynamics and those of the observer based vector control system are calculated analytically by neglecting the machine parameter change. In order to analyze the robust stability, a linear model of the observer based vector control system is proposed taking into account the machine parameter change. By using this model, the trajectories of the poles and zeros of the torque transfer function are computed and discussed. To test validity of the theoretical analysis, experiments are conducted by using a digital signal processor (TMS320C30) and a current controlled voltage source PWM inverter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2290-2295
• /
• 2005

In this paper, it is developed simulator system of 3 D.O.F parallel robot for educate of expertness. This simulator system is composed of three parts ? 3 D.O.F parallel robot, controller (hardware) and software. First, basic structure of the robot is 3 active rotary actuator that small geared step motor with fixed base. An input-link is connected to this actuator, and this input-link can connect two ball joints. Thus, two couplers can be connected to the input-link as a pair. An end-plate, which is jointed by a ball joint, can be connected to the opposite side of the coupler. A sub-link is produced and installed to the internal spring, and then this sub-link is connected to the upper and bottom side of the coupler in order to prevent a certain bending or deformation of the two couplers. The robot has the maximum diameter of 230 mm, 10 kg of weight (include the table), and maximum height of 300 mm. Hardware for control of the robot is composed of computer, micro controller, pulse generator, and motor driver. The PC used in the controller sends commands to the controller, and transform signals input by the user to the coordinate value of the robot by substituting it into equations of kinematics and inverse kinematics. A controller transfer the coordinate value calculated in the PC to a pulse generator by transforming it into signals. A pulse generator analyzes commands, which include the information received from the micro controller. A motor driver transfer the pulse received from the pulse generator to a step motor, and protects against the over-load of the motor Finally, software is a learning purposed control program, which presents the principle of a robot operation and actual implementation. The benefit of this program is that easy for a novice to use. Developed robot simulator system can be practically applied to understand the principle of parallel mechanism, motors, sensor, and various other parts.

• 대한원격탐사학회지
• /
• 제5권1호
• /
• pp.41-56
• /
• 1989

Improvement of the multichannel sea surface temperature(MCSST) software, which had been developed for the purpose of operating under mainframe computer system, was seeked in order to operate effectively in a mini computer system. CPU time and processing time, which is not a major factor under mainframe computer system, become a critical factor in real time image processing under mini computer system. Due to fixed kernel size(3$\times$4) of the old MCSST software, high spatial resolution characteristics of the original image received from satellites were apparently degraded when images are transformed into a cartesian coordinate system after geometrical distortions of the image due to earth curvature are removed. CPU and processing time were reduced to 0.13 and 0.15~0.22 comparing with the old MCSST's, respectively, by applying disk block I/O and M/T queue I/O method under VAX-11/750 computer. The high resolution quality (1.1km in AVHRR) of the processed image was guaranted using 2$\times$2 kernel size and applying moving window techniques without sacrificing CPU and processing time much.

• 한국정보통신학회논문지
• /
• 제26권3호
• /
• pp.449-455
• /
• 2022

본 논문에서는 발광 다이오드(LED)의 조도를 기반으로 삼각측량법을 사용한 위치 계측 시스템을 제안한다. 세 개의 LED는 가상공간의 천장에 위치하고 각각의 고정 좌표는 모니터링 프로그램에 입력하여, 조도 값과 길이의 관계식을 통해 각각 LED로부터 조도 센서까지의 길이를 도출하였다. 도출된 길이를 바탕으로 삼각측량법을 사용해 가상공간의 물체 위치 정보를 검출하였다. 삼각측량법으로 도출된 길이의 오차를 최소화하기 위해 최소자승식을 이용하여 오차를 최대한으로 줄였다. 기존의 가시광통신(VLC)을 이용한 실내 위치 측정시스템과는 달리, 제안된 시스템은 송신기와 수신기 사이의 동기화가 필요치 않으므로 시스템을 간결하게 구성할 수 있다.

• 한국측량학회지
• /
• 제22권2호
• /
• pp.127-135
• /
• 2004

근접사진측량에 의한 정밀측정에서는 사용하는 렌즈의 검정, 요구정확도에 따른 촬영계획이 매우 중요하다. 또한 사진측량에 의한 대상물의 절대변위ㆍ변형측량을 위해서는 절대좌표계의 설정이 무엇보다도 중요하다. 본 연구에서는 35mm 측정용 카메라를 이용한 초근접 촬영을 위해 초점거리 21mm의 초광각 렌즈에 대한 렌즈 검정을 실시하였으며, 소규모 영역에 대한 주기적 관측을 통해 절대변화량을 모니터링 할 수 있는 측정시스템을 개발하고, 이 시스템을 일정한 주기로 수중구조물의 표면에 대한 절대변화량 모니터링에 적용함으로서 개발한 시스템의 효율성을 제시하였다.

• 대한임베디드공학회논문지
• /
• 제13권6호
• /
• pp.289-296
• /
• 2018

Drone detection in FMCW radar system needs complex techniques because a drone beat frequency is highly dynamic and unpredictable. Therefore, the current static signal processing algorithms cannot show appropriate detection accuracy. With dynamic signal fluctuation and environmental clutters, it can fail to detect a drone or make false detection. It affects to the radar system integrity and safety. Constant false alarm rate (CFAR), one of famous static signal process algorithm is effective for static environment. But for drone detection, it shows low detection accuracy. In this paper, we suggest neural network based FMCW radar system for detecting a drone. We use recurrent neural network (RNN) because it is the effective neural network for signal processing. In our FMCW radar system, one transmitter emits FMCW signal and four-way fixed receivers detect reflected drone beat frequency. The coordinate of the drone can be calculated with four receivers information by triangulation. Therefore, RNN only learns and inferences reflected drone beat frequency. It helps higher learning and detection accuracy. With several drone flight experiments, RNN shows false detection rate and detection accuracy as 21.1% and 96.4%, respectively.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.35-41
• /
• 2006

In this paper, we develop anti-sway control in proposed techniques for an ATC system. The developed algorithm is to build the optimal path of container motion and to calculate an anti-collision path for collision avoidance in its movement to the finial coordinate. Moreover, in order to show the effectiveness in this research, we compared NNP PID controller to be tuning parameters of controller using NN with 2-DOF PID controller. The experimental results jar an ATC simulator show that the proposed control scheme guarantees performances, trolley position, sway angle, and settling time in NNP PID controller than other controller. As a result, the application of NNP PID controller is analyzed to have robustness about disturbance which is wind of fixed pattern in the yard.

• 한국해양공학회지
• /
• 제22권5호
• /
• pp.69-74
• /
• 2008

This study performed a numerical simulation to predict the development of ship waves and their propagation in the shallow water region of Gunzang New Port and to examine the stability of taut line mooring at the sea wall using the design criteria. In order to predict the propagation of ship waves based on the speeds of various ships under complicated and shallow water depths, a computer model was constructed based on the Boussinesque equation with a fixed coordinate system. Additionally, an investigation if the stability was made by applying MOSES under the environmental loadings estimated by OCIMF.