• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.89-96
• /
• 2004

The effect of La promoter on the carbon deposition and catalytic activity in the synthesis gas production with supported Ni catalysts was investigated. Active component was Ni and support was $CeO_2$ and the promoter used was La. The reaction was carried out in a fixed bed reactor at 1 atm and $650{\sim}800^{\circ}C$. The catalysts were prepared by two methods, the impregnation method and urea method. The catalysts prepared by the urea method showed 10 times higher surface area than those of prepared by the impregnation method. By the introduction of La promoter in the catalyst system, carbon deposition was remarkably reduced from 16% to 2%. It appears that the promoter facilitates the formation of a stable fluoride-type phase, which reduces the carbon deposition. The best catalytic activity and CO and $H_2$ selectivities were obtained with 2.5wt% $Ni/Ce(La)O_x$ catalyst at $750^{\circ}C$, giving 90% methane conversion, 93 and.80% of CO and $H_2$ selectivities, respectively.

• 한국응용과학기술학회지
• /
• 제29권2호
• /
• pp.268-277
• /
• 2012

폐 PVC전선의 열적분해 특성에 관한 연구를 TGA 및 고정층 반응기를 이용하여 연구하였다. 본 연구에서는 분해온도, 공기유량 및 CaO/ PVC의 비를 실험조건으로 고려하였으며, PVC전선의 열적분해과정에서 발생되는 염화수소 및 독성가스의 제거를 위한 CaO의 첨가에 대한 효과를 검증하기 위하여 PVC 전선의 열적분해 과정에서 생성되는 기상 생성물을 GC/MS를 이용하여 분석하였다. 또한 CaO의 첨가효과를 고찰하고자 액성 생성물에 대한 GC/MS을 함께 수행하였으며, 분해온도, 공기유량 및 CaO/PVC의 비에 따른 액상, 기상 및 고상 잔류물의 수율 변화를 함께 고찰하였다. 본 연구로부터 CaO의 첨가량이 증가할수록 PVC의 열적분해 과정에서 발생되는 염화수소의 제거량이 증가함을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1613-1618
• /
• 2014

Perovskite-type oxides are promising oxygen carriers in producing oxygen-enriched $CO_2$ gas stream for oxyfuel combustion. In this study, a new series of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ (x = 0.2, 0.4, 0.6, 0.8) was prepared and used to produce $O_2/CO_2$ mixture gas. The phase, crystal structure, and morphological properties of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ were investigated through X-ray diffraction, specific surface area measurements, and environmental scanning electron microscopy. The oxygen desorption performance of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ was studied in a fixed-bed reactor system. Results showed that the different x values of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ have no obvious effects on crystalline structure. However, the oxygen desorption performance of $SrCo_{1-x}Fe_xO_{3-{\delta}}$ is improved by Co doping. Moreover, $SrCo_{0.8}Fe_{0.2}O_{3-{\delta}}$ synthesized via a new EDTA method has a larger BET surface area ($40.396m^2/g$), smaller particle size (48.3 nm), and better oxygen production performance compared with that synthesized through a liquid citrate method.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1119-1126
• /
• 2007

Hydrogen gas and carbon nanotubes along with nanocarbon were produced from commercial natural gas using fixed bed catalyst reactor system. The maximum amount of carbon (491 g/g of catalyst) formation was achieved on 25% Ni, 3% Cu supported catalyst without formation of CO/CO2. Pure carbon nanotubes with length of 308 nm having balloon and horn type shapes were also formed at 673 K. Three sets of catalysts were prepared by varying the concentration of Ni in the first set, Cu concentration in the second set and doping with K in the third set to investigate the effect on stabilization of the catalyst and production of carbon nanotubes and hydrogen by copper and potassium doping. Particle size analysis revealed that most of the catalyst particles are in the range of 20-35 nm. All the catalysts were characterized using powder XRD, SEM/EDX, TPR, CHN, BET and CO-chemisorption. These studies indicate that surface geometry is modified electronically with the formation of different Ni, Cu and K phases, consequently, increasing the surface reactivity of the catalyst and in turn the Carbon nanotubes/H2 production. The addition of Cu and K enhances the catalyst dispersion with the increase in Ni loadings and maximum dispersion is achieved on 25% Ni: 3% Cu/Al catalyst. Clearly, the effect of particle size coupled with specific surface geometry on the production of hydrogen gas and carbon nanotubes prevails. Addition of K increases the catalyst stability with decrease in carbon formation, due to its interaction with Cu and Ni, masking Ni and Ni:Cu active sites.

• 한국수소및신에너지학회논문집
• /
• 제22권2호
• /
• pp.232-239
• /
• 2011

DME has received much attention because of its possible use as a fuel and a chemical feedstock. Chemical conversion of DME to olefin (DTO) over various SAPO-34 catalysts was carried out using a fixed bed reactor. Main products of the reaction were light olefins such as ethylene, propylene and butenes. The best reaction conditions for high life time of the catalyst and high selectivity of light olefins were a reaction temperature of $400^{\circ}C$ and a WHSV of $3.54h^{-1}$. In addition, it was found that the deactivation of a SAPO-34 catalyst can be significantly suppressed by the addition of $ZrO_2$ as a supporter.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.116-120
• /
• 2015

HY 제올라이트 촉매 상에서 2-부탄올의 탈수반응을 통한 부텐 제조에 관한 연구를 수행하였다. 고정층 촉매 반응기에서 2-부탄올 탈수 반응을 수행하였다. HY 제올라이트 촉매의 $Si/Al_2$ 비가 증가할 때 2-부탄올의 전환율이 증가하는 경향을 보였는데 이는 산점의 세기가 증가했기 때문으로 해석할 수 있다. 2-부탄올의 탈수반응에 의해 생성된 1-부텐, 트랜스-2-부텐 및 시스-2-부텐의 선택도는 $Si/Al_2$ 몰 비의 변화에 큰 영향을 받지 않았다. 따라서, 본 연구에서 사용한 HY 제올라이트 촉매 중에서 $Si/Al_2$ 몰 비가 60인 촉매가 2-부탄올의 탈수 반응에서 1-부텐의 수율을 최대화하는데 가장 유리한 것을 알 수 있었다. HY (60) 제올라이트 촉매의 경우, 1-부텐의 수율을 최대화하기 위한 최적 반응 온도는 $250^{\circ}C$ 이었다.

• Korean Chemical Engineering Research
• /
• 제43권5호
• /
• pp.560-565
• /
• 2005

1-methylnaphthalene(1-MN)과 2-methylnaphthalene(2-MN) 사이에서의 트랜스메틸화 반응을 제올라이트, H-mordenite(HM), H-Beta$(H{\beta})$, H-USY(HUSY) 촉매를 이용한 고정층 반응기에서 수행하였다. $H{\beta}_{25}(SiO_2/Al_2O_3=25)$ 촉매는 다음과 같은 조건, 반응온도 $350^{\circ}C$, 반응압력 1.5 Mpa, 전체 액상 반응물의 WHSV $2.7g_{feed}/g_{cat}{\cdot}h$, 반응물 1-MN과 2-MN의 몰비 1:1, 반응 1시간에서 2-MN/1-MN 비=2.3와 2,6-DMN/2,7-DMN 비=1.3을 보이면서 다른 촉매보다 높은 전환율과 안정성을 나타내었다. 촉매의 세공구조, 산성도와 관련하여 촉매성능을 해석하였다.

• 한국수소및신에너지학회논문집
• /
• 제23권1호
• /
• pp.1-7
• /
• 2012

This study was performed to develop a low Pt content catalyst as a catalyst for HI decomposition in S-I process. Bimetallic catalysts added various amounts of Pt on a silica supported Ni catalyst were prepared by impregnation method. HI decomposition was carried out using a fixed bed reactor. As a result, Ni-Pt bimetallic catalyst showed enhanced catalytic activity compared with each monometallic catalyst. Deactivation of Ni-Pt catalyst was not observed while deactivation of Ni monometallic catalyst was rapidly occurred in HI decomposition. The HI conversion of Ni-Pt bimetallic catalyst was increased similar to Pt catalyst with increase of the reaction temperature over a temperature range 573K to 773K. From the TG analysis, it was shown that $NiI_2$ remained on the Ni(5.0)-Pt(0.5)/$SiO_2$ catalyst after the HI decomposition reaction was decomposed below 700K. It seems that small amount of Pt in bimetallic catalyst increase the decomposition of $NiI_2$ generated after the decomposition of HI. Consequently, it was considered that the activity of Ni-Pt bimetallic catalyst was kept during the HI decomposition reaction.

• 한국수소및신에너지학회논문집
• /
• 제19권3호
• /
• pp.199-208
• /
• 2008

HI decomposition was conducted using Pt/C-based catalysts with a fixed-bed reactor in the range of 573 K to 773 K. To examine the change of the characteristic properties of the catalysts, $N_2$ adsorption analyser, a X-ray diffractometer(XRD), and a scanning electron microscopy(SEM) were used before and after the HI decomposition reaction. the effect of Pt loading on HI decomposition was investigated by $CO_2$-TPD. HI conversion of all catalysts increased as decomposition temperature increased. The XRD analysis showed that the sizes of platinum particle became larger and agglomerated into a lump during the reaction. From $CO_2$-TPD, it can be concluded that the cause for the increase in catalytic activity may be attributed to the basic sites of catalyst surface. The results of both b desorption and gasification reaction showed the restriction on the use of Pt/C-based catalyst.

• 청정기술
• /
• 제20권3호
• /
• pp.256-262
• /
• 2014

본 연구에서는 ${\gamma}-Al_2O_3$에 구리를 함침시킨 촉매를 고정층 반응기에 충전시킨 후 휘발성유기물질(VOCs)인 벤젠의 촉매산화 반응특성을 살펴보았다. 실험조건은 반응온도 $200{\sim}500^{\circ}C$, 벤젠의 농도 400~650 ppm, 가스유입량 50~100 cc/min, 공간속도 $7,500{\sim}22,500hr^{-1}$의 범위로 적용하였다. BET분석, 주사전자현미경(SEM), 열천칭(TGA) 분석을 통해 제조된 촉매의 물성을 조사하였으며, 벤젠의 촉매산화반응의 전환율에 대하여 고찰하였다. 실험결과, 벤젠의 농도와 공간속도가 낮아질수록 벤젠 산화반응의 전환율은 증가함을 알 수 있었다. 벤젠의 촉매산화반응은 1차 균일반응으로 해석될 수 있었으며, 반응의 활성화 에너지(Ea)는 17.2 kcal/mol, 빈도인자(A)는 $1.33{\times}10^6sec^{-1}$이었다.