• 한국공간구조학회논문집
• /
• 제4권1호
• /
• pp.49-59
• /
• 2004

이전 논문에서 미 중부 및 동남부 지역의 전형적인 다경간 단순효와 다경간 강거더 연속교의 지진 응답을 연구하였으며, 이런 교량에서 덱 사이의 충돌과 큰 연성이 요구되는 기둥은 취약하여 손상을 입을 수 있다는 것을 보여주었다. 더구나, 고정 및 가동 교조장치는 강한 지진운동에 쉽게 피해를 입을 수 있다. 이 논문에서는 몇 개의 개선된 고무 베어링, 납-고무 베어링 그리고 제지선을 사용하여 전형적인 다경간 단순교와 다경간 강거더 연속교의 지진 응답을 평가하였다. 납-고무 베어링은 지진에 취약한 전형적인 교량의 응답을 개선하는데 효과적인 방법으로 평가되었다. 고무 베어링은 기둥의 요구량을 줄이지만, 다경간 단순교 강거더 교량에서 덱 사이의 강한 충돌을 유발시킨다. 제지선은 일반적으로 사용되지만 다경간 단순교와 다경간 연속교의 지진에 대한 손상을 절감하는데 중간정도의 효과를 보여주었다.

• Earthquakes and Structures
• /
• 제9권3호
• /
• pp.603-623
• /
• 2015

The scale and nature of the recent earthquakes in the world and the related earthquake disaster index coerce the concerned community to become anxious about it. Therefore, it is crucial that seismic lateral load effect will be appropriately considered in structural design. Application of seismic isolation system stands as a consistent alternative against this hazard. The objective of the study is to evaluate the structural and economic feasibility of reinforced concrete (RC) buildings with base isolation located in medium risk seismic region. Linear and nonlinear dynamic analyses as well as linear static analysis under site-specific bi-directional seismic excitation have been carried out for both fixed based (FB) and base isolated (BI) buildings in the present study. The superstructure and base of buildings are modeled in a 3D finite element model by consistent mass approach having six degrees of freedom at each node. The floor slabs are simulated as rigid diaphragms. Lead rubber bearing (LRB) and High damping rubber bearing (HDRB) are used as isolation device. Change of structural behaviors and savings in construction costing are evaluated. The study shows that for low to medium rise buildings, isolators can reduce muscular amount of base shears, base moments and floor accelerations for building at soft to medium stiff soil. Allowable higher horizontal displacement induces structural flexibility. Though incorporating isolator increases the outlay, overall structural cost may be reduced. The application of base isolation system confirms a potential to be used as a viable solution in economic building design.

• 한국공간구조학회논문집
• /
• 제17권2호
• /
• pp.21-32
• /
• 2017

The objective of this study is to analysis the mechanical characteristics on the geometric nonlinear behavior of radial cable roof systems for long span retractable cable roof structures. The retractable roof is designed as a full control system to overcome extreme outdoor environments such as extreme hot or cold weather, strong wind or sunlight, and the cable roof greatly can reduce roof weight compared to other rigid structural system. A retractable cable roof system is a type of structures in which the part of entire roof can be opened and closed. The radial cable roof is an effective structural system for large span retractable roofs, the outer perimeter of the roof is a fixed membrane roof and the middle part is a roof that can be opened and closed. The double arrangement cables of a radial cable truss roof system with reverse curvature works more effectively as a load bearing cables, the cable system can carry vertical load in up and downward direction. In this paper, to analyze the mechanical characteristics of a radial cable roof system with central posts, the authors will investigate the tensile forces of bearing cables, stabilized cables, ring cables, and the deflection of roof according to the height of the post or hub that affects the sag ratio of cable truss. The tensile forces of the cables and the deflection of the roof are compared for the cases when the retractable roof is closed and opened.

• 우주기술과 응용
• /
• 제1권1호
• /
• pp.7-22
• /
• 2021

본 논문에서는 국내 최초로 개발 중인 랑데부/도킹 기술검증용 초소형위성의 지상 환경에서의 도킹 단계 시험 결과에 대해 기술하였다. 랑데부/도킹 기술은 우주기술 중 고난이도 기술로서 우주 궤도상에서 상대 물체에 접근한 후 작업을 수행하는 데 매우 핵심적인 기술이기도 하다. 본 논문에서는 에어베어링 장치를 이용하여 체이서가 모의 타겟으로 접근하여 최종적으로 도킹하는 단계의 지상시험 결과에 대해 기술하고자 한다. 본 논문에서 검증된 2차원 평판에서 도킹 단계에서의 추력 제어 알고리즘과 시각 기반 센서를 이용한 상대물체 인식 및 상대거리 추정 알고리즘을 기반으로 추후에는 우주에서의 시험을 위한 3차원 공간에서의 랑데부/도킹 알고리즘으로 확장·개발하는 데 이용하고자 한다.

• 대한족부족관절학회지
• /
• 제19권3호
• /
• pp.97-101
• /
• 2015

Purpose: The purpose of this study was to analyze the clinical results of application of bioabsorbable screws in hallux valgus surgery using modified Mau osteotomy. Materials and Methods: We retrospectively reviewed medical records of 25 patients. Operations were performed between May 2013 and January 2014. We performed 33 modified Mau osteotomies and fixed using bioabsorbable screws. Mean age of patients was 52 years (range 19 to 71). Mean follow up duration was 13.2 months (range 12.3 to 18.9). The clinical evaluations included pain visual analogue scale (VAS) score, American Orthopaedic Foot and Ankle Society (AOFAS) score, and satisfaction score. Weight bearing anteroposterior radiographs were taken for measurement of hallux valgus angle (HVA), intermetatarsal angle (IMA), and distal metatarsal articular angle (DMAA). All radiographs were evaluated in order to detect complications related to bioabsorbable screws such as osteolysis, cyst formation, and fixation failure. Results: The mean pre- and postoperative pain VAS scores were 4.0 and 1.7 (p<0.05). The mean AOFAS score improved from 52.6 to 82.8 (p<0.05). Preoperative HVA and IMA were 31.2 and 13.9, respectively. Postoperative HVA and IMA were 5.2 and 6.2 (p<0.05). The DMAA increased from 7.8 to 9.9 (p<0.05). There was one case of superficial wound infection and one loss of correction, and no case of osteolysis, cystic formation around the screw, or deep infection. All patients showed union without fixation failure. Conclusion: The clinical and radiological evaluation of this study demonstrates reliable results without fixation failure or allergic reaction. The use of bioabsorbable screw appears not to be inferior to metal screw fixation in hallux valgus surgery.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.41-44
• /
• 2008

PCT는 장경간 가시설 벽체를 지지하는 써포트 구조물을 프리캐스트 방식으로 공장에서 미리 제작하고, 콘크리트 소재로 구성하여 강성을 만족시킬 수 있도록 그 구조가 개선된 프리캐스트 가시설 구조체이다. 그것의 부재들은 공장에서 미리 정형화된 형태로 제작되고 가시설 벽체의 내측면에 고정수단을 매개로 근접되게 배치된다. PCT system은 내부에 콘크리트가 충진되는 세그먼트 부재들의 단부와 접촉되어 결합수단을 매개로 일체화되어 또한 다른 세그먼트 부재를 연결시키는 연결구로 이루어진 써포트 구조물로 구성된 것이다. 본 연구는 전체적인 길이가 긴 장경간 가시설 벽체에 대한 충분한 지지력을 얻을 수 있을 뿐만 아니라, 프리캐스트 방식으로 제작되어 콘크리트 양생에 소요되는 시간을 단축시킬 수 있으므로 시공기간이 단축되는 등의 유용한 효과를 갖는다.

• 한국중재학회지:중재연구
• /
• 제17권2호
• /
• pp.141-165
• /
• 2007

This study aims to make a contribution to the promotion of trade and economic development of South Korea, and, at the same time, call attention to the increasing trend of investment agreements concluded within Free Trade Agreements (FTA) by examining theoretically FTAs and dispute resolution and investigating systematically the conclusion procedure of agreements, and the system, institutions, and jurisdiction of dispute resolution, and presenting these findings to the government and investors involved. The most problematic aspect in the legal process of arbitration involving disputes over investment is that of arguments concerning the right of jurisdiction. When a dispute arises, even though an investor files for arbitration at an ICSID institution, the parties become involved in another energy-consuming argument even before proceeding to the hearing and decision of the original plan in cases in which the respondent of the dispute files an objection to the decision rights of the arbitral tribunal. As the main basis for this type of plea, the point of non-existence of jurisdiction is first raised where the applicable dispute does not fall under the range of investments defined in individual investment contracts or investment agreements such as a Bilateral Investment Treaty (BIT). To avoid an open-ended definition of investment for the range of investments, articles concerning investments in the FTA and NAFTA between Canada and the USA adopt the limited closed-list method. Article 96 of the FTA between Japan and Mexico applied the same abovementioned method of limited form of definition regarding range of investments and concluded BITs between member countries of APEC applied a similar method as well. Instead of employing the previously used inclusive definition, the BITs concluded between countries of Latin America and the USA are equipped with limited characteristics of an investment. Furthermore, to correspond with this necessary condition the three following requirements are needed : 1) fixed investment funding; 2) expected profits resulting from such investments; 3) and the existence of fixed risk bearing.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.387-401
• /
• 2016

This paper takes a half-through steel truss arch bridge as an example. A seismic analysis is conducted with nonlinear finite element method. Contrast models are established to discuss the effect of simplified method for main girder on the accuracy of the result. The influence of seismic wave direction and wave-passage on seismic behaviors are analysed as well as the superstructure and arch ring interaction which is mostly related with the supported bearings and wind resistant springs. In the end, the application of cable-sliding aseismic devices is discussed to put forward a layout principle. The main conclusions include: (1) The seismic response isn't too distinctive with the simplified method of main girder. Generally speaking, the grillage method is recommended. (2) Under seismic input from different directions, arch foot is usually the mostly dangerous section. (3) Vertical wave input and horizontal wave-passage greatly influence the seismic responses of arch ring, significantly increasing that of midspan. (4) The superstructure interaction has an obvious impact on the seismic performance. Half-through arch bridges with long spandrel columns fixed has a less response than those with short ones fixed. And a large stiffness of wind resistant spring makes the the seismic responses of arch ring larger. (5) A good isolation effectiveness for half-through arch bridge can be achieved by a reasonable arrangement of CSFABs.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.13.1-13.8
• /
• 2017

Background: Oronasal/antral communication, loss of teeth and/or tooth-supporting bone, and facial contour deformity may occur as a consequence of maxillectomy for cancer. As a result, speaking, chewing, swallowing, and appearance are variably affected. The restoration is focused on rebuilding the oronasal wall, using either flaps (local or free) for primary closure, either prosthetic obturator. Postoperative radiotherapy surely postpones every dental procedure aimed to set fixed devices, often makes it difficult and risky, even unfeasible. Regular prosthesis, tooth-bearing obturator, and endosseous implants (in native and/or transplanted bone) are used in order to complete dental rehabilitation. Zygomatic implantology (ZI) is a valid, usually delayed, multi-staged procedure, either after having primarily closed the oronasal/antral communication or after left it untreated or amended with obturator. The present paper is an early report of a relatively new, one-stage approach for rehabilitation of patients after tumour resection, with palatal repair with loco-regional flaps and zygomatic implant insertion: supposed advantages are concentration of surgical procedures, reduced time of rehabilitation, and lowered patient discomfort. Cases presentation: We report three patients who underwent alveolo-maxillary resection for cancer and had the resulting oroantral communication directly closed with loco-regional flaps. Simultaneous zygomatic implant insertion was added, in view of granting the optimal dental rehabilitation. Conclusions: All surgical procedures were successful in terms of oroantral separation and implant survival. One patient had the fixed dental restoration just after 3 months, and the others had to receive postoperative radiotherapy; thus, rehabilitation timing was longer, as expected. We think this approach could improve the outcome in selected patients.

• 대한족부족관절학회지
• /
• 제17권4호
• /
• pp.302-308
• /
• 2013

Purpose: To present clinical results of proximal first metatarsal opening wedge osteotomy and low profile plate fixation in hallux valgus deformity. Materials and Methods: Thirty-two patients (39 feet) underwent surgery for hallux valgus deformity. Fourteen patients (18 feet; Group A) underwent proximal first metatarsal opening wedge osteotomy fixed with low profile titanium plate ($Arthrex^{(R)}$), and 18 patients (21 feet; Group B) underwent proximal chevron osteotomy with two K-wires. Improvement in hallux valgus angle (HVA), 1, 2 intermetatarsal angle (IMA), range of motion of 1st metatarsophalangeal joint, VAS score, and the length of first metatarsal on weight-bearing radiograph were evaluated preoperatively and at final follow-up. Results: HVA improved from $36.2{\pm}6.6$ degrees to $11.7{\pm}5.1$ degrees, and 1, 2 IMA improved from $15.7{\pm}2.6$ degrees to $7.2{\pm}1.9$ degrees. VAS score improved from $7.2{\pm}1.2$ to $1.4{\pm}0.9$. There were no significant differences clinically and radiologically. Conclusion: Proximal first metatarsal opening wedge osteotomy with stable fixation using low profile plate may be an effective surgical option for correction of hallux valgus deformity.