• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.98-106
• /
• 2003

To construct pile-supported wharf structures that must support heavy horizontal loads, both vertical piles and batter piles are used. Batter piles are used to secure the bearing capacity against the horizontal loads. However, past case histories have shown that the heads of batter piles are vulnerable because these heads are subjected to excessive axial loads during earthquakes. Therefore, the aseismatic reinforcement method must be developed to prevent batter pile heads from breaking due to excessive seismic loads. Two different connecting methods of either inserting rubber or ball-bearing between batter pile head and upper plate were proposed to improve the aseismatic efficiency. Three large-scale pile head models(rubber type model, ball-bearing type model, and fixed type model) were manufactured and horizontal loading tests were peformed for these models. The results showed that the force-displacement relationship of the fixed type model was linear, but that of the rubber type model and the ball-bearing type model was bilinear. The increase in the horizontal displacement led to the increase in the horizontal stiffness of the rubber type models and the decrease in that of the ball-bearing type model. Compared with the values for fixed type model, the damping ratios of the rubber type model and the ball-bearing type model increased about 33~185％ and 263~269％, respectively.

• Tribology and Lubricants
• /
• 제22권5호
• /
• pp.252-259
• /
• 2006

Air foil bearing supports the rotating journal using hydrodynamic force generated at thin air film. The bearing performances, stiffness, damping coefficient and load capacity, depend on the rotating speed and the performance of the elastic foundation, bump foil. The main focus of this study is to decide the dynamic performance of corrugated bump foil, structural stiffness and Coulomb damping caused by friction between bump foil and top foil/bump foil and housing. Structural stiffness is determined by the bump shape (bump height, pitch and bump thickness), dry-friction, and interacting force filed up to fixed end. So, the change of the characteristics was considered as the parameters change. The air foil bearing specification for analysis follows the general size; diameter 38.1 mm and length 38.1 mm (L/D=1.0). The results show that the stiffness at the fixed end is more than the stiffness at the free end, Coulomb damping is more at the fixed end due to the small displacement, and two dynamic characteristics are dependent on each other.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1135-1141
• /
• 2006

Air foil bearing supports the rotating journal using hydrodynamic force generated at thin air film. The bearing performance, stiffness, damping coefficient and load capacity, depends on the rotating speed and the performance of the elastic foundation, bump foil. The main focus of this study is to decide the dynamic performance of corrugated bump foil, structural stiffness and Coulomb damping caused by friction between bump foil and top foil/bump foil and housing. Structural stiffness is determined by the bump shape (bump height, pitch and bump thickness), dry-friction, and interacting force filed up to fixed end. So, the change of the characteristics was considered as the parameters change. The air foil bearing specification for analysis follows the general size; diameter 38.1 mm and length 38.1mm (L/D=1.0). The results show that the stiffness at the fixed end is more than the stiffness at the free end, Coulomb damping is more at the fixed end due to the small displacement, and two dynamic characteristics are dependent on each other.

• 자원환경지질
• /
• 제13권4호
• /
• pp.241-246
• /
• 1980

Some components in uranium-bearing formations which consist mainly of black shale, slate. and low grade coal-bearing formation of Ogcheon Belt were processed statistically in order to find out the geochemical correlations with uranium. Geochemical enrichment of uranium, vanadium and molybdenum in low grade coal-bearing formations and surrounding rocks is remarkable in the studied area. Geochemical correlation coefficient of uranium and molybdenum in the rocks displays about 0.6, and that of uranium and fixed carbon about 0.4. Uranium and vanadium in uranium-bearing low grade coals denote very high correlation with fixed carbon, which is considered to be responsible for enrichment of metallic elements, especially molybdenum. Close geochemical correlation of uranium-molybdenum couple in the rocks can be applied as a competent exploration guide to low grade uranium deposits of this area.

• 전산구조공학
• /
• 제7권1호
• /
• pp.83-90
• /
• 1994

국내의 설계지진은 상대적으로 작은규모 이지만 일점고정 연속교에 있어서는 지진시 교축방향의 고정지점에 상부구조의 모든 관성력이 집중됨에 따라 그 교각과 기초구조에는 상당히 큰 교축방향 수평력이 작용하게 된다. 기존의 교량의 내진설계 방법에서는 교각의 비탄성거동에 의존하는 수정응답계수를 사용하여 교각의 설계하중을 낮추어 설계에 사용하고 있으나 이는 교각의 비탄성거동으로 인한 손상과 그에 따른 큰 상부구조의 변위를 초래할 가능성이 있다. 본 연구에서는 내진분리베어링이 설치된 교량의 비선형 동적 방법을 제시하고 대표적인 내진분리베어링인 lead-rubber 베어링을 고정받침대신 사용하였을 경우 국내 설계 응답스펙트럼에 상응하는 지반운동하에서 교량의 응답특성을 살펴보았다. 내진분리베어링이 설치된 교량의 비선형 동적해석을 통해 1초이하 주기의 교량에 있어서 lead-rubber 베어링의 사용은 상당한 교축방향의 수평력 감소효과를 가져오며 상부구조의 수평변위도 그리 크지 않음을 보였다. 따라서 교량의 내진설계시 내진분리베어링의 사용으로 경제성과 내진안전성을 동시에 얻을 수 있을 것이다.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.489-495
• /
• 2003

예인형 선 배열 소나는 구조적인 특성상 배열 축을 중심으로 대칭적인 빔을 형성하기 때문에 탐지된 표적에 대하여 좌/우 방위 구분에 있어 모호성을 드러낸다. 이러한 예인형 선 배열의 좌/우 구분이 모호한 문제점을 해결하기 위하여 고정형 카디오이드 빔을 적용한 방법이 사용되었다. 하지만 고정형 카디오이드 빔을 사용할 경우 약 11°이내의 영역에서 카디오이드 빔의 후면 이득에 대한 영향을 줄일 수가 없기 때문에 좌/우 분리 성능이 저하된다. 이 문제를 해결하기 위해서 본 논문에서는 적응형 카디오이드 빔을 사용하여 후면 빔의 이득을 줄임으로써 예인형 선 배열의 성능을 향상시켰다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권3호
• /
• pp.366-377
• /
• 2016

This paper presents a vision-based guidance method that allows a fixed-wing aircraft to orbit around a target at a given radius. The guidance method uses a simple formula that regulates a relative side-bearing angle estimated by a vision system. The global asymptotic stability of the associated guidance law is demonstrated, and a linear analysis is performed to facilitate the proper selection of the relevant control parameters. A flight experiment is presented to demonstrate the feasibility and performance of the proposed guidance method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.227-230
• /
• 2004

A self-compensated water-hydrostatic bearing has advantages in bearing stiffness. In this paper, the mechanism is applied to hydrostatic journal bearing for achieving the high bearing stiffness. The finite element method is applied to analyze the load characteristics of the self-compensated journal bearing. From the analyzed results, it is confirmed that though the self-compensated journal bearing has higher load capacity and stiffness than conventional fixed capillary journal bearing, the merit is decreased in the case of high eccentricity, that is, a spindle system with self-compensated journal bearing must be designed to have the load capacity large enough. For improving the practicality, a rectangular type capillary is introduced and discussed. Theoretically analyzed results show that it has more advantages than the conventional annular type capillary in the practical usage. The experimental verification on the analysis method is performed, and the experimental results show good agreement with theoretical results.

• 한국전산구조공학회논문집
• /
• 제37권4호
• /
• pp.251-258
• /
• 2024

이 논문은 포트 받침이 설치된 3경간 연속 콘크리트 거더교를 대상으로 받침의 노후화가 교량의 지진응답에 미치는 영향을 분석하였다. 포트 받침은 고정단 및 가동단의 강성을 반영해 교축방향, 교축직각방향, 수직방향의 탄성 스프링으로 모델링하였다. 포트 받침의 노후화를 고정단 받침의 수평강성 저하와 가동단 받침의 수평강성 증가로 나누어 받침의 노후화가 교량의 지진 거동에 미치는 영향을 분석하였다. 수치해석으로부터 구한 고유진동수 값과 이 교량의 설계 고유진동수를 비교하여 해석 대상 3경간 연속 거더교의 유한요소모델이 타당함을 보였으며, 국내 도로교설계기준(한계상태설계법)의 설계응답스펙트럼에 부합하는 인공지진파를 이용해 받침 강성의 변화에 따른 교량 상부 및 받침의 지진응답을 계산하였다. 지진해석 결과, 받침의 노후화로 인해 고정단 받침의 수평강성이 감소할 경우 지진으로 인한 고정단 받침의 절대최대 상대변위가 증가하였다. 이는 받침을 지지하는 모르타르의 균열과 앵커 볼트의 탈락 가능성이 커짐을 의미한다. 받침의 노후화로 인해 가동단 받침의 수평강성이 증가하는 경우에는 지진으로 인한 고정단 받침의 절대최대 전단력이 감소하였다. 그러나 이 경우 가동단 바로 위 거더 단면에 추가의 휨인장응력이 발생할 수 있으며, 이러한 받침 성능의 변화로 인하여 지진 시 연속 콘크리트교에 예기치 못한 구조적 손상이 발생할 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.346-353
• /
• 2002

The risk of bearing failure is evaluated through the seismic response analysis of a bridge considering the probabilistic characteristics of structural properties such as the mass of superstructure, the stiffness of pier, and the translational and rotational stiffness of the foundation as well as seismic loadings during the bridge service lift. The effect of pounding between adjacent vibration units on the risk of bearing failure is also investigated. The probabilistic characteristics of structural properties are obtained by the Monte Carlo simulations based on the probabilistic characteristics of basic random variables included in the structural properties. From the simulation results, the failure probability of fixed bearings attached on the abutment is found to be much higher than those placed on the piers. It is also found that the pounding effect significantly increases the failure probability of bearings. In the simply supported bridges, the risk of bearing failure increases as the number of bridge spans increase. Therefore, the failure probability of fixed bearing due to the effects of pounding phenomena and the number of bridge spans should be considered in the seismic desist of bearings.