• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1907-1914
• /
• 2010

A novel catalytic kinetic method is proposed for the determination of Se(IV), Se(VI) and total inorganic selenium in water based on the catalytic effect of Se(IV) on the reduction of bromate by p-nitrophenylhydrazine at pH 3.0. The generated bromine, $Br_2$ or $Cl_2$ plus $Br_2$ in 0.1 M NaCl (or NaBr) environment efficiently decolorized Calmagite and the reaction was monitored spectrophotometrically at 523 nm as a function of time. In this indicator reaction, bromide acted as an activator for the catalysis of selenium (IV) and a reducing agent for selenium (VI) at pH 3.0, which allowed the determination of total selenium. The fixed time method was adopted for the determination and speciation of inorganic selenium. Under the optimum conditions, the calibration graph are linear in the range 1 - 35 ${\mu}gL^{-1}$ of Se(IV) for the fixed time method at $25^{\circ}C$. The detection limit based on statistical $3S_{blank}$/m-criterion was 0.215 ${\mu}gL^{-1}$ for the fixed time method (7 min). All of the variables that affect the sensitivity at 523 nm were investigated, and the optimum conditions were established. The interference effect of various cations and anions on the Se (IV) determination was also studied. The selectivity of the selenium determination was greatly improved with the use of the strongly cation exchange resin such as Amberlite IR120 plus. The proposed kinetic method was validated statistically and through recovery studies in natural water samples. The RSDs for ten replicate measurements of 5, 15 and 25 ${\mu}gL^{-1}$ of Se(IV) and Se(VI) was changed between 2.1 - 4.85%. Analyses of a certified standard reference material (NIST SRM 1643e) for selenium using the fixed-time method showed that the proposed kinetic method has good accuracy. Se(IV), Se(VI) and total inorganic selenium in environmental water samples have been successfully determined by this method after selective reduction of Se(VI) to Se(IV).

• The Transactions of the Korea Information Processing Society
• /
• v.2 no.5
• /
• pp.677-690
• /
• 1995

In this paper, we propose the high efficiency data compression capable of error control using block-sorting, move to front(MTF) and arithmetic code with variable length in to fixed out. First, the substring with is parsed into length N is shifted one by one symbol. The cyclic shifted rows are sorted in lexicographical order. Second, the MTF technique is applied to get the reference of locality in the sorted substring. Then the preprocessed sequence is coded using VF(variable to fixed) arithmetic code which can be limited the error propagation in one codeword. The key point is how to split the fixed length codeword in proportion to symbol probabilities in VF arithmetic code. We develop the new VF arithmetic coding that split completely the codeword set for arbitrary source alphabet. In addition to, an extended representation for symbol probability is designed by using recursive Gray conversion. The performance of proposed method is compared with other well-known source coding methods with respect to entropy, compression ratio and coding times.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.7
• /
• pp.371-378
• /
• 2005

The objective or this paper is to measure the in-plane vibration intensity of a beam with a damped end that means the magnitude and direction of vibration power. Three experimental methods have been implemented to measure the in-plane vibration intensity over the beam. The first method is the accelerometer array method using two accelerometers. The second method is the frequency response function method using the only one accelerometer. The third method is the reference accelerometer method using a fixed reference accelerometer and another moving accelerometer. Those methods have been used to measure the spatial distribution of in-plane vibration intensity over the beam. The results obtained with those methods have been compared with each other. The results have been compared with an input power. It showed that the frequency response function method and the reference accelerometer method as well as the accelerometer array method can be effectively used to measure the in-plane vibration intensity in beams.

• Publications of The Korean Astronomical Society
• /
• v.28 no.3
• /
• pp.95-100
• /
• 2013

A fiber-optic reference signal transmission system, which transmits the 1.4 GHz reference signal from H-maser to receiver cabin in radio telescopes, was adopted for compensating the phase changes due to temperature variation and antenna movement. At the first experiment, the remote signal's phase changed more than 15 degrees at 1.4 GHz. We found unstable components in sub-system experiments and replaced them. The main cause of unstable phase stability was the unaligned polarization axis between Laser Diode and Mach-Zehnder Modulator (MZM). The improved system stability showed $1{\times}10^{-16}$ allan standard deviation at 1,000 sec integration time with the antenna fixed. When the antenna moves in the azimuth axis, the 1.4 GHz remote signal showed the phase change smaller than 0.2 degrees.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.692-704
• /
• 2007

Recently, Basic patterns with excellent body fitness and automation availability are required to be developed in order to automate the patterns of women's clothes. In this study, this reference points, reference lines and segments were fixed onto 3D scan data for the lower body the women in their twenties, they were directly spread out to be 2D flat pattern to facilitate development into the design of slacks adhered closely to the human body such as special and highly-functional clothes, and then slacks 2D pattern was developed for the purpose of seeking scientific approach to the development into basic form slacks and 3d emotional pattern. For conversion of 3D pattern into 2D flat pattern, reference points and segments were created by using Rapid Form of 3D shape analysis software, and triangle mesh of the body surface of the created shape was developed with Auto CAD 2005. The correspondence between slacks and human body was examined by the fixation of major reference lines. Specially, the wearing characteristics of slacks were considered by the fixation of side lines in consideration of posture. As a result of using the way of development to constantly maintain the length while 3D triangle mesh is converted into 2D flat mesh, the shape was shown to be excellently reproduced, and the area of flat pattern was increased compared to the shape of parting plane. Also, the sunk-in curve like the brief line of front crotch length needed a cutting line when it was closely adhered, when mesh was overlapped, and the pattern area was smaller compared to the actual shape.

• Journal of Korea Multimedia Society
• /
• v.10 no.8
• /
• pp.1004-1016
• /
• 2007

In this paper we proposed a Weight-Update-Control Adaptive Noise Canceller which improves speech when environmental noise is stationary and it is hard to acquire a reference signal. Adaptive Noise Canceller(ANC) needs a reference signal, but it is not easy to measure pure noise without voice for reference in factory. Because there are mixed various mechanical noise and workers' voice. Therefore ANC is not suitable to reduce background noise. So we proposed the method that uses an arbitrary constant as an input signal and inputs microphone signal to the reference signal. The noise is eliminated using updated weights in non-speech range. In speech range the weight is fixed and the modified voice is acquired then voice is restored through transversal filter. The proposed method is based on facts that the factory noise is stationary and the noise is not changed in short conversation range. As a result of simulation using MATLAB, we confirmed that the proposed method is effective for reducing factory noise and has high signal to noise ratio(SNR).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5249-5267
• /
• 2016

Cognitive radio is an efficient technique to improve spectrum efficiency and relieve the pressure of spectrum resources. In this paper, we investigate the spectrum sensing period in cooperative relay cognitive radio networks; analyze the relationship between the available capacity and the signal-to-noise ratio of the received signal of second users, the target probability of detection and the active probability of primary users. Finally, we derive the closed form expression of the optimal spectrum sensing period in terms of maximum throughput. We simulate the probability of false alarm and available capacity of cognitive radio networks and compare optimal spectrum sensing period scheme with fixed sensing period one in these performance. Simulation results show that the optimal sensing period makes the cognitive networks achieve the higher throughput and better spectrum sensing performance than the fixed sensing period does. Cooperative relay cognitive radio networks with optimal spectrum sensing period can achieve the high capacity and steady probability of false alarm in different target probability of detection. It provides a valuable reference for choosing the optimal spectrum sensing period in cooperative relay cognitive radio networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.156-160
• /
• 2002

In this paper, we have estimated by means of the theoretical analysis and the simulation of FCA(Fixed Channel Assignment) and CB(Channel Borrowing) in order to consider the CB as a technique to meet ducting interference from adjacent countries. Also, we assumed that the receiving power level of ducting interference with time rate can be characterized by the normal distribution due to the previous measured results, and the ducting interferences which are exceeding the reference power level can be regarded as calls. These calls can be processed by CR assignment and by which sharing channels between cells brings to us the method of meeting the ducting interference to use spectrum resources effectively. However, the spectrum frequency reusing and the interference effects between channels should be considered in CB simulation in the future.

• Journal of Korea Port Economic Association
• /
• v.21 no.3
• /
• pp.115-148
• /
• 2005

In the liner market, a strategy is hard to sustain as competitors can easily imitate the strategy. For examples, when a number of shipping companies pursue this space exchange strategy in a liner market, their competitors are likely to build a cooperative alliance, following similar strategic pattern without any difficulty. Such strategic imitations are universal in international liner market. Therefore, the success of global alliance requires following critical considerations. First, the strategy of global alliance should be designed the way it gives the liner operators an economy of scale, which could be a key advantage in the competitive market. Second, thorough global alliance the lines should be able to improve their transport service through the reduction of operating costs and the business rationalization. The international alliance today is characterized by a strategic cooperation among a limited number of 'mega-carriers'. Such cooperation between the large-sized operators has come in many different forms. However, the trend has been towards the space exchange agreement, where a carrier on a route offers to another carrier a fixed number of spaces for a fixed period of time. the major carriers have been entered into groupings by integrating their services structures to increase market power. With reference to the above, this study has the following primary objectives: (1) to explore the present status of global alliance in liner shipping industry, (2) to prospect the future trend of the global alliance.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.3
• /
• pp.171-177
• /
• 2016

Noise problem that occurs in living environment is a big trouble in the economic, social and environmental aspects. In this paper, the filtered-X LMS algorithms, the adjoint LMS algorithms, and the robust adjoint LMS algorithms will be introduced for applications in active noise control(ANC). The filtered-X LMS algorithms is currently the most popular method for adapting a filter when the filter exits a transfer function in the error path. The adjoint LMS algorithms, that prefilter the error signals instead of divided reference signals in frequency band, is also used for adaptive filter algorithms to reduce the computational burden of multi-channel ANC systems such as the 3D space. To improve performance of the adjoint LMS ANC system, an off-line measured transfer function is connected parallel to the LMS filter. This parallel-fixed filter acts as a noise controller only when the LMS filter is abnormal condition. The superior performance of the proposed system was compared through simulation with the adjoint LMS ANC system when the adaptive filter is in normal and abnormal condition.