• 대한공간정보학회지
• /
• 제22권3호
• /
• pp.39-46
• /
• 2014

현재의 GNSS 측위 방법 중 네트워크(network) RTK(Real-Time Kinematic) 측량은 비교적 저렴하고 쉬운 조작방법 등으로 GNSS 측량의 대중화를 형성하고 있다. 하지만 네트워크 RTK 측량 시 현장 여건 및 기타 조건에 관계없이 모호정수(ambiguity) 고정해를 취득한 데이터에 대하여 대부분 그 결과를 무조건적으로 수용하고 이를 실무에 적용하고 있다. 따라서 본 연구에서는 장애물이 존재하는 지역에서 조건별 네트워크 RTK 측량 데이터의 정확도 변화를 고찰하였다. 연구방법으로 수신점으로부터 장애물과의 거리 및 고도각 변화를 주고 GPS 단독수신에 의한 측량과 GPS+GLONASS 조합에 의한 측량을 실시하고 각 취득 데이터의 위치정확도를 비교 분석하였다. 그 결과 시통이 용이한 지역에서는 GPS 단독측위 방법이 정확도에서 양호한 결과를 보였으며, 장애물에 근접한 지역일수록 GPS+GLONASS 조합에 의한 방법이 안정적인 결과로 나타났다. 본 실험의 결과를 기반으로 측위정확도에 영향을 줄 수 있는 다양한 조건별 연구가 진행된다면 대중화 되고 있는 네트워크 RTK 측위 방법의 정확도 향상을 기대할 수 있을 것이다.

• 한국대기환경학회지
• /
• 제22권6호
• /
• pp.799-807
• /
• 2006

The catalytic activity of $Pt/{\gamma}-Al_2O_3$ catalysts for the oxidation of toluene and toluene+xylene mixture was investigated in the microreactor of fixed-bed type. The calcination temperatures and loadings of $Pt/{\gamma}-Al_2O_3$ catalysts played the important role in the activity of catalysts for the oxidation of toluene. The increasing calcination temperatures and loadings of $Pt/{\gamma}-Al_2O_3$ catalysts increased the crystallite size of the platinum to result in the higher oxidation activity of catalysts. The catalytic activity for the toluene oxidation over $Pt/{\gamma}-Al_2O_3$ catalysts turned out to be increasing in the order of $500^{\circ}C\;<\;800^{\circ}C<600^{\circ}C\;<\;700^{\circ}C$ for calcination temperatures and 0.1 wt% < 0.3 wt% < 1.0 wt% for platinum loadings, respectively. The 1.0 wt% $Pt/{\gamma}-Al_2O_3$ catalysts calcined at $700^{\circ}C$ for 3 hrs in the air showed the highest activity for the oxidation of the toluene. The decrease of oxidation activity of $Pt/{\gamma}-Al_2O_3$ catalysts calcined at $800^{\circ}C$ might result from the decrease of active sites by sintering of platinum metals as well as ${\gamma}-Al_2O_3$ supports. The 1.0wt% $Pt/{\gamma}-Al_2O_3$ catalyst showed the activity from the lower temperature at $120^{\circ}C$, reached the light-off temperature ($T_{50%}$) at $180^{\circ}C$, and leveled off its activity at $340^{\circ}C$ with the conversion of 100% 'Mutual promotion' effects were observed for the binary mixture of toluene and xylene. The activity of the easy-to-oxidize toluene was slightly increased with the existence of the xylene. It might suggest the different mechanism for the oxidation of toluene and xylene on the $Pt/{\gamma}-Al_2O_3$ catalysts on different sites, and its reaction of gaseous oxygen.

• Journal of Biosystems Engineering
• /
• 제3권2호
• /
• pp.114-125
• /
• 1978

The use of petroleum fuels in grain drying causes problems of high cost and management. To solve these problems, it is required to study on soLar energy as an alternative to petroleum fuels for grain drying. The purposes of this study were to find out the optimum received area and air flow rate of a flat-plate solar air collector for grain drying and to assess its effects on grain drying with a small grain bin. The results of this study are summarized as follows ; 1. The calculated optimum tilt angles of the collector in the summer and autumn drying seasons were 20 and 50 degress, respectively, in suwon area. 2. The outlet temperature of the collector was $36^\circ C$ on the daily average with the maximum of $36^\circ C$ at 12:00 o clock. Solar radiation on the collector surface was 1.04 ly( 1 langley = 1 cal/$cm^2$) per minute on the daily average and 1.30 ly per minute on the maximum at 11:00am. The thermal efficiency of the collector was 62.4 percent on the daily average, and the air flow-rate per unit receiving are was 1.03 $m^3$/min/$m^2$.4. The calculated optimum receiving area and the air flow-rate per unit cubic volume for paddy in autumn drying season was 2 $m^2$ and 2$m^3$/min , respectively. 5. not significantly difference in the collector efficiency was appeared between the rotating and fixed type of solar collector. 6. For drying of wheat with 0.6 meter of the depth in the bin, approximately 9 hours were required to reduce the moisture content from 21.6% to 13% with air follow rate of 5 $m^3$/min an initial moisture per cubic meter of wheat and with air temperature of $52^\circ C$. 7. In the drying test of rough rice with a turning operation in a grain bin approximately 21 hours were required to reduced the moisture from 21% to 14.5% with airflow rate of 2 $m^3$/min per cubic meter of rice and the air temperature of $43.5^\circ C$. 8. Over-drying at the bottom and less -drying at the top of the grain mass was resulted from the high -temperature of drying air which was obtained from the flat-plate solar collector in this test. An appropriate operation should be prepared for the uniform moisture of the grain in the bin.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2012년도 자성 및 자성재료 국제학술대회
• /
• pp.104-105
• /
• 2012

The temperature dependence of the effective magnetic anisotropy constant K(T) of ferrite nanoparticles is obtained based on the measurements of SQUID magnetometry. For this end, a very simple but intuitive and direct method for determining the temperature dependence of anisotropy constant K(T) in nanoparticles is introduced in this study. The anisotropy constant at a given temperature is determined by associating the particle size distribution f(r) with the anisotropy energy barrier distribution $f_A(T)$. In order to estimate the particle size distribution f(r), the first quadrant part of the hysteresis loop is fitted to the classical Langevin function weight-averaged with the log?normal distribution, slightly modified from the original Chantrell's distribution function. In order to get an anisotropy energy barrier distribution $f_A(T)$, the temperature dependence of magnetization decay $M_{TD}$ of the sample is measured. For this measurement, the sample is cooled from room temperature to 5 K in a magnetic field of 100 G. Then the applied field is turned off and the remanent magnetization is measured on stepwise increasing the temperature. And the energy barrier distribution $f_A(T)$ is obtained by differentiating the magnetization decay curve at any temperature. It decreases with increasing temperature and finally vanishes when all the particles in the sample are unblocked. As a next step, a relation between r and $T_B$ is determined from the particle size distribution f(r) and the anisotropy energy barrier distribution $f_A(T)$. Under the simple assumption that the superparamagnetic fraction of cumulative area in particle size distribution at a temperature is equal to the fraction of anisotropy energy barrier overcome at that temperature in the anisotropy energy barrier distribution, we can get a relation between r and $T_B$, from which the temperature dependence of the magnetic anisotropy constant was determined, as is represented in the inset of Fig. 1. Substituting the values of r and $T_B$ into the $N{\acute{e}}el$-Arrhenius equation with the attempt time fixed to $10^{-9}s$ and measuring time being 100 s which is suitable for conventional magnetic measurement, the anisotropy constant K(T) is estimated as a function of temperature (Fig. 1). As an example, the resultant effective magnetic anisotropy constant K(T) of manganese ferrite decreases with increasing temperature from $8.5{\times}10^4J/m^3$ at 5 K to $0.35{\times}10^4J/m^3$ at 125 K. The reported value for K in the literatures is $0.25{\times}10^4J/m^3$. The anisotropy constant at low temperature region is far more than one order of magnitude larger than that at 125 K, indicative of the effects of inter?particle interaction, which is more pronounced for smaller particles.

• 대한소아치과학회지
• /
• 제38권4호
• /
• pp.427-434
• /
• 2011

중심교합위의 상태에서 편측 혹은 양측으로 상악 구치부의 치아가 하악 구치부의 협측으로 위치한 경우를 scissors bite라고 한다. 이는 상악의 폭경이 크거나 하악의 폭경이 좁은 경우 발생한다. Scissors bite의 경우 방치하게 되면 하악의 성장이 방해받게 되고 그 결과, 악궁 폭경의 부조화가 심해져 저작 장애를 일으킬 수 있으므로 조기 차단 교정이 반드시 필요하다. 실제 임상에서는 여러 치아의 scissors bite보다 최후방 구치 혹은 그 외 하나의 구치만의 single tooth scissors bite(STSB)을 보이는 경우가 많다. 이러한 STSB의 경우도 방치하게 되면 저작력으로 인하여 구치의 각도가 더욱 악화되므로 즉각적인 치료가 필요하다. 본 증례에서는 STSB를 보이는 7세, 14세, 12세, 16세의 환자에게 각각 criss-cross elastic, 고정성 장치, 가철성 장치, miniscrew를 사용하여 치료한 증례를 보고하였다. 각 환자의 증례에 적합한 장치를 잘 선택하여 사용한다면 치아를 정출시키는 등의 부작용을 야기하지 않고 양호한 결과를 얻을 수 있을 것이다.

• 구강회복응용과학지
• /
• 제22권3호
• /
• pp.221-230
• /
• 2006

Recently, the need for esthetic results has increased the interest for all-ceramic crown prosthesis. Furthermore, the development of zirconium core via CAD/CAM system has allowed the all ceramic restorations to be applied to almost all fixed prosthesis situations. But, the increased strength has been reported to increase in proportion with the bond strength of cement, and recently, the tribochemical system which increases the bond strength through, silica coating and silanization has been introduced. The purpose of this study was to compare the $Rocatec^{TM}$ system and $CoJet^{TM}$ system with the traditional acid etching and silanization method of the irconium based ceramic. The surface character was observed via SEM(X2000), and the bond strength with the resin cement were measured. 50 In-Ceram Zirconia (Adens, Korea) discs were fabricated and embedded in resin, group 1 was treated with glass-bead blasting and cleaning, group 2 was treated with 20% HF for 10 minutes and silanized, group 3 was treated with the $Rocatec^{TM}$ system, and group 4 was treated with the $CoJet^{TM}$ system. Each group was comprised of 10 specimens. The specimens were cemented to a $3mm{\times}5mm$ resin block with Super-Bond C&B. The shear bond strength was measured with the $Instron^{(R)}$ 8871 at a crosshead speed of 0.5mm/min. The results were as follows. 1. According to SEM results, there were little difference between group 1 & group 2, but in group 3 and 4, silica coating was detected and there was increase in surface roughness. 2. The shear bond strength decreased in the order of group 3(46.28MPa), group 4(42.04MPa), group 2(31.56MPa), and group 1(27.46MPa). 3. There was significant differnce between group 1&2 and group 3&4(p<0.05). From the results above, it can be considered that the conventional method of acid etching and silane treatment cannot increase the bond strength with resin cements, and that by applying the tribochemical system of $Rocatec^{TM}$ system and $CoJet^{TM}$ system, we can achieve a stronger all ceramic restoration. Further studies on surface treatments to increase the bond strength are thought to be needed.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.694-702
• /
• 2002

활성탄은 산업분야에서 촉매로도 사용되고 용제 회수, 가스 분리, 그리고 악취제거 등 다양한 용도로 사용되고 있다. 본 연구에서는 입상활성탄에서 CTC(Carbon Tetrachloride, $CCl_4$)의 흡착능에 따른 잔존수분의 영향을 연구하였다. 고정층 흡착탑에서 CTC의 입구농도, 유속변화에 따른 파과곡선과 흡착량의 변화 및 활성탄의 잔존수분 탈착특성도 함께 연구하였다. 활성탄의 잔존수분량은 0에서 20%(w/w)범위에 있었으며, 모든 실험은 298.15 K에서 수행하였으며 활성탄에 대한 사염화탄소의 흡착평형실험결과는 Langmuir등온식으로 잘 묘사되었다. 활성탄의 잔존 수분량이 증가함에 따라 $CCl_4$의 흡착량은 감소하였으며 사염화탄소의 흡착에 따른 잔존수분의 탈착은 지수적으로 감소되었고, LDF(linear driving force)모델을 이용하여 파과곡선을 잘 모사할 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권7호
• /
• pp.985-993
• /
• 2017

Objective: The objective of this study was to evaluate increasing doses of a novel microbial phytase (Cibenza Phytaverse, Novus International, St. Charles, MO, USA) on standardized total tract digestibility (STTD) of P in canola meal (CM), corn, corn-derived distiller's dried grains with solubles (DDGS), rice bran (RB), sorghum, soybean meal (SBM), sunflower meal (SFM), and wheat. Methods: Two cohorts of 36 pigs each (initial body weight = $78.5{\pm}3.7kg$) were randomly assigned to 2 rooms, each housing 36 pigs, and then allotted to 6 diets with 6 replicates per diet in a randomized complete block design. Test ingredient was the only dietary source of P and diets contained 6 concentrations of phytase (0, 125, 250, 500, 1,000, or 2,000 phytase units [FTU]/kg) with 0.4% of $TiO_2$ as a digestibility marker. Feeding schedule for each ingredient was 5 d acclimation, 5 d fecal collection, and 4 d washout. The STTD of P increased (linear or exponential $p{\leq}0.001$) with the inclusion of phytase for all ingredients. Results: Basal STTD of P was 37.6% for CM, 37.6% for corn, 68.6% for DDGS, 10.3% for RB, 41.2% for sorghum, 36.7% for SBM, 26.2% for SFM, and 55.1% for wheat. The efficiency of this novel phytase to hydrolyze phytate is best described with a broken-line model for corn, an exponential model for CM, RB, SBM, SFM, and wheat, and a linear model for DDGS and sorghum. Based on best-fit model the phytase dose (FTU/kg) needed for highest STTD of P (%), respectively, was 735 for 64.3% in CM, 550 for 69.4% in corn, 160 for 55.5% in SBM, 1,219 for 57.8% in SFM, and 881 for 64.0% in wheat, whereas a maximum response was not obtained for sorghum, DDGS and RB within the evaluated phytase range of 0 to 2,000 FTU/kg. These differences in the phytase concentration needed to maximize the STTD of P clearly indicate that the enzyme does not have the same hydrolysis efficiency among the evaluated ingredients. Conclusion: Variations in enzyme efficacy to release P from phytate in various feedstuffs need to be taken into consideration when determining the matrix value for phytase in a mixed diet, which likely depends on the type and inclusion concentration of ingredients used in mixed diets for pigs. The use of a fixed P matrix value across different diet types for a given phytase concentration is discouraged as it may result in inaccurate diet formulation.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.21-30
• /
• 2015

Ceramic foams are prepared as positive images corresponding to a plastic foam structure which exhibits high porosities (85-90%). This structure makes the ceramic foams attractive as a catalyst in a dry reforming process, because it could reduce a high pressure drop problem. This problem causes low mass and heat transfers in the process. Furthermore, the reactants would shortly contact to catalyst surface, thus low conversion could occur. Therefore, this research addressed the preparation of dry reforming catalysts using a sol-gel catalyst preparation via a polymeric sponge method. The specific objectives of this work are to investigate the effects of polymer foam structure (such as porosity, pore sizes, and cell characteristics) on a catalyst performance and to observe the influences of catalyst preparation parameters to yield a replica of the original structure of polymeric foam. To accomplish these objectives industrial waste foams, polyurethane (PU) and polyvinyl alcohol (PVA) foams, were used as a polymeric template. Results indicated that the porosity of the polyurethane and polyvinyl alcohol foams were about 99% and 97%. Their average cell sizes were approximate 200 and 50 micrometres, respectively. The cell characteristics of polymer foams exhibited the character of a high permeability material that can be able to dip with ceramic slurry, which was synthesized with various viscosities, during a catalyst preparation step. Next, morphology of ceramic foams was explored using scanning electron microscopy (SEM), and catalyst properties, such as; temperature profile of catalyst reduction, metal dispersion, and surface area, were also characterized by $H_2-TPR$ and $H_2-TPD$ techniques, and BET, respectively. From the results, it was found that metal-particle dispersion was relatively high about 5.89%, whereas the surface area of ceramic foam catalysts was $64.52m^2/g$. Finally, the catalytic behaviour toward hydrogen production through the dry reforming of methane using a fixed-bed reactor was evaluated under certain operating conditions. The approaches from this research provide a direction for further improvement of marketable environmental friendly catalyst production.

• The Journal of Korean Physical Therapy
• /
• 제11권3호
• /
• pp.81-87
• /
• 1999

전기자극이 흰쥐 피부의 비만세포 수 및 탈과림에 미치는 영향을 규명할 목적으로 본 실험을 시행하였다. Sprague-Dawley계 수컷 흰쥐 12마리를 6마리씩 무작위로 전기자극군과 대조군에 배치하고 전기자극군 흰쥐의 등에 양극전극을 부착한 후 맥동빈도 100pps, 맥동기간 $140{\mu}s$, 전류량 $500{\mu}A$로 60분간 전기작극하였으며 대조근은 전극만 부착하고 전류를 통전시키지 않았다. 전자자극 후 등의 피부를 적출하여 포르말린에 고정한 후 파리핀 포매 절편을 제작하여 toluidine blue 및 alcian blue 염색을 하였다. 이 표본을 고배율 현미경하에서 관찰하여 현미경에 부착된 CCD 카메라를 통해 개인용 컴퓨터로 보낸 다음 영상분석 프로그램을 이용하여 비만세포 수, 탈과립 비만세포 수, 비만세포의 아종 수, 부위별 비반세포를 계측한 후 비만세포의 밀도, 탈과립 비만세포 비율, 비만세포 종류의 비율, 분포 비율을 산출하여 분석하였다. 실험 결과 전기자극군의 비만세포 밀도 및 탈과립 비만세포 비율이 대조군보다 통계학적으로 유의하게 높게 나타났으며, 결합조직 비만세포의 비율이 유의하게 낮았다. 또한 비만세포는 표피에는 존재하지 않고 진피에 분포하며 진피 심부에 유의하게 많이 분포하고 있었다. 이러한 결과는 흰쥐 피부의 양극 전기자극이 비만세포의 수를 증가시키고 비만세포의 탈과립을 유발시키고 있음을 시사하고 있다. 향후 비만세포와 관련이 있는 피부질환 및 손상을 대상으로 한 연구가 기대된다.