• 제목/요약/키워드: Fixation length

검색결과 155건 처리시간 0.027초

성견 하악골 절단 후 기계적 골 견인에 의해 형성된 골 신장부에 대한 시기별 조직학적 변화 (HISTOLOGICAL CHANGES IN THE ELONGATED BONE AFFECTED BY OSTEODISTRACTION OF THE MANDIBLE IN THE DOG)

  • 백선호;안병근;박영주;박희건;박준우;이건주;이용찬;조병욱
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제27권5호
    • /
    • pp.404-416
    • /
    • 2001
  • Purpose : Traditionally, the treatement of choice has been a bone grafting procedure to increase the length of bone in case of actual length discrepancy. But, bone grafting procedure has many disadvantages, for example, graft resorption, donor site morbidity, and so on. So, many trials have been performed to avert the use of autogenous bone graft via introducing new materials or methods. And, one of those trials has been realized by the development of a technique inducing bone lengthening by osteotomy (or corticotomy) and slow gradual distraction of the osteotomized segments. This new technique of bone lengthening dates back to the early 20th century. But, the majority of information concerning the biology of new bone formation during bone lengthening and technical details of the procedure were produced by extensive clinical and experimental studies performed by Ilizarov, a Russian surgeon. According to Ilizarov, with adequate blood supply, preservation of periosteum, rigid fixation of the osteotomized segments, and proper rate and rhythm of distraction, intramembranous bone rapidly develops within the distraction gap in the limb lengthening procedure. In the limb lengthening, many orthopedic surgeons try to observe the biologic and clinical principles recommended by Ilizarov. In the oral and maxillofacial region, however, not a few studies must be performed to apply this surgical technique in the clinical cases. Besides, the mechanism of bone formation in the distraction gap is not clear, yet. The purpose of this experiment was to scrutinize serially the histological changes in the elongated bone affected by osteodistraction of the mandibular body in an adult canine model. In addition, it was performed to confirm the presence of specific region(s) which was important in the bone formation in the gap through the observation of the expression pattern of osteocalcin and osteonectin with the immunohistochemical examination. Materials and Methods : The experimental and control specimens were obtained from seven adult male mongrel dogs weighing over 20kg. The distractors were custom-made linear extraoral devices and bicortical fixation screws were 2.3mm in diameter, 50mm in total length, 15mm in screw length. The distractors were devised to produce a linear gap of 0.75mm between two bony segments every $360^{\circ}$ turn of the rotation rod of the device. The mandibular body of the right side of each animal was corticotomized perpendicular to the occlusal plane and then two bony segments were separated completely by careful manipulation of the segments with bone forceps. The left side of each animal was left intact. This side was served as control. At sixth day after osteotomy and fixation of the segments were performed, distraction of the segments was commenced with a rate of 1.1mm/day and a rhythm of two/day for ensuing 7 days. The animals were euthanized at the 16th. 29th, and 44th day after the osteotomy. The bony specimens were decalcified, embedded in paraffin, sectioned $5{\mu}m$ thick and stained with H&E. The prepared specimens were examined under the light microscope. And, immunohistochemical examinations using anti-osteocalcin antibody (OC1, Biodesign, USA) and anti-osteonectin antibody (Haematologic Technologies Inc., Essex, VT) to locate the expressions of osteocalcin and osteonectin, respectively, were performed. Results : 1. New bone was observed already at the 16th. day after osteotomy. This suggests that new bone formation in osteodistraction was commenced at an early stage of the regenerative process. But, radiologically and microscopically, bony union was not completed in the distraction gap at the 44th. day after osteotomy. Therefore, rigid fixation must be maintained between the bony fragments till the complete bony union is confirmed clinically rather than one month or so after the completion of distraction.

  • PDF

뇌성마비자의 의복여밈 수행능력과 수지기능 (A study on the fastening performance and finger function of the cerebral palsied)

  • 김순분;함옥상;서승록
    • 대한인간공학회지
    • /
    • 제12권2호
    • /
    • pp.45-62
    • /
    • 1993
  • This study was aimed to obtain the available information for the clothing constru- ction according to the traits of the cerebral palsied. For this purpose, their abilities of eleven methods seven of fastening performance and seven finger functions were tested and their correlationships were clarified. The results are as follows : 1. The length of time needed to perform each fastening method in descending order is as follows : small button > small snap > culumn button > large button > middle button > large snap > separating zipper > velcro. As the spastic has better function than the athetoid in the performance of all fastening methods, there was a significant difference between the types of handicap and between the handi- capped and the normal, except for velcro fastening style in which there was no significant differ- ence between the types of handicap. 2. In finger functions of the cerebral palsied, according to the types of handicap there was no significant difference among grip, palm fixation and hands coordination, howefer there were significant differences among pulp pinching, lateral pinching, finger rolling and lifting control. As to the correlation between the ability of fastening performance and finger function, there was a high significant correlation between the length of time needed to perform each fastenting and finger function of hands co ordination, and that of finger rolling; and there was a significant correlation between the length of time and pulp pinching, and laternal pinching.

  • PDF

전방십자인대의 최적 재건을 위한 등장성 해석 (Analysis of Isometry of the Anterior Cruciate Ligament for Optimal Ligament Reconstruction)

  • 박정홍;서정탁;문병영;손권
    • 대한기계학회논문집A
    • /
    • 제30권4호
    • /
    • pp.457-464
    • /
    • 2006
  • The anterior cruciate ligament (ACL) is liable to a major injury that often results in a functional impairment requiring surgical reconstruction. The success of reconstruction depends on such factors as attachment positions, initial tension of ligament and surgical methods of fixation. The purpose of this study is to find isometric positions of the substitute during flexion/extension. The distance between selected attachments on the femur and tibia was computed from a set of measurements using a 6 degree-of-freedom magnetic sensor system. A three-dimensional knee model was constructed from CT images and was used to simulate length change during knee flexion/extension. This model was scaled for each subject. Twenty seven points on the tibia model and forty two points on the femur model were selected to calculate length change. This study determined the maximum and minimum distances to the tibial attachment during flexion/extension. The results showed that minimum length changes were $1.9{\sim}5.8mm$ (average $3.6{\pm}1.4mm$). The most isometric region was both the posterosuperior and anterior-diagonal areas from the over-the-top. The proposed method can be utilized and applied to an optimal reconstruction of ACL deficient knees.

쇄골 간부 불유합에서의 개재 삼면피질 장골 이식술 (Intercalary Tricortical Iliac Bone Graft in the Surgical Treatment of Nonunion of Midshaft Clavicular Fractures)

  • 조철현;장형규
    • Clinics in Shoulder and Elbow
    • /
    • 제15권1호
    • /
    • pp.32-36
    • /
    • 2012
  • 목적: 쇄골 간부 불유합에서 개재 삼면피질 장골 이식술 및 금속판 고정술을 시행하고 그 방사선학적 및 임상적 결과를 알아보고자 하였다. 대상 및 방법: 2007년 9월부터 2011년 5월까지 쇄골 간부 불유합으로 개재 삼면피질 장골 이식술 및 금속판 고정술을 시행한 10예를 대상으로 하였으며, 평균 추시 기간은 30.7 (12~57)개월이었다. 불유합 부위의 경화된 골을 충분히 절제한 후 구조적 지지 및 쇄골 길이를 회복할 수 있도록 삼면피질 장골을 골 결손 부위에 개재한 후 금속판 고정술을 시행하였다. 술 후 방사선적 평가는 단순 방사선 사진을 이용하여 골 유합을 판단하였고, 임상적 평가는 UCLA, ASES, Quick DASH 평가 점수를 이용하였다. 결과: 전 예에서 골 유합을 얻을 수 있었으며, 평균 골 유합 기간은 18.4 (14~24)주였다. UCLA 점수는 술 전 평균 16.7점에서 최종 추시 시 평균 27.4점으로, ASES 점수는 술 전 평균 52.1점에서 최종 추시 시 평균 83.6점으로 호전되었다 (p<0.05). 최종 추시 시 Quick DASH 점수는 평균 40.5점이었다. 합병증으로 2예에서 견관절 강직이 있었으며, 그 중 1예는 술 후 11개월째 금속물 제거술과 함께 견관절 관절경 수술을 시행하였다. 그 외 고정물의 파손 및 감염 등의 합병증은 없었다. 결론: 쇄골 간부 불유합에서 개재 삼면피질 장골 이식술은 구조적 지지대 역할 뿐만 아니라 쇄골의 길이를 회복할 수 있는 좋은 술식으로 사료된다.

견봉 쇄골 관절 탈구에 대한 견봉 쇄골 관절의 관혈적 정복술 (Open Reduction of Acromioclavicular Joint for the Acromioclavicular Joint Dislocations)

  • 송현석;최남용;한석구;나기호;남원식;양혁재;박성진
    • Clinics in Shoulder and Elbow
    • /
    • 제9권2호
    • /
    • pp.189-195
    • /
    • 2006
  • Purpose: To analyze the result of the accurate open reduction of acromioclavicular (AC) joint and pin fixation, coracoclavicular (CC) screw fixation without CC ligament repair for AC joint injuries. Materials and Methods: Between January 2000 and December 2003, seventeen cases with at least one year follow-up among twenty-one cases underwent operation for AC-CC ligament injuries. A transverse incision approximately 5 cm in length was made over the clavicle, and the AC joint was reduced accurately. Under the image intensifier, a cannulated screw and washer were inserted for the CC ligament. Two Steinman pins were inserted for the AC joint and the AC ligament was repaired with nonabsorbable suture. Gentle passive range of motion was begun postoperative 2 weeks. The pins were removed at $6{\sim}8$ weeks and the screw was removed at $10{\sim}12$ weeks. The results were evaluated by a distance between AC and CC joints on plain films and ASES score at last follow-up. Results: At the last follow-up, there was no limitation of motion and average ASES score was 96($86{\sim}100$ points). There was no failure showing over 5 mm difference of distance compared to opposite side on the plain films. Seven cases had the skin damages and local infection due to pin migration and three cases showed the loosening of CC screw. Conclusion: We could have satisfactory results by accurate reduction of AC joint and simple pins and screw fixation for AC-CC ligament injuries.

생흡수성 핀을 이용한 소아 경골 과간부 견열 골절의 관절경적 정복 및 고정 방법 - 수술 술기 - (Arthroscopic Reduction and Fixation of an Anterior Cruciate Ligament Avulsion Fracture From the Tibial Eminence Using Bioabsorbable Pins - Technical Note -)

  • 이수찬;양일순;서희수
    • 대한관절경학회지
    • /
    • 제13권2호
    • /
    • pp.183-187
    • /
    • 2009
  • 목적: 성장판이 남아 있는 청소년기 환자에서 발생한 경골 과간부 견열 골절에 대해 생흡수성 핀을이용한 간단한 관절경적 정복 및 고정 방법을 소개하고자 한다. 수술 술기: 전외측 및 전내측 삽입구를 통하여 진단적 관절경 검사를 시행 후, 손상부를 잘 관찰하기 위하여 미세 골절파편과 응고된 혈액을 제거한다. 탐침을 이용하여 골절편을 정복한 상태에서 1.1 mm K-강선을 관절의 전상부에서 경피적으로 삽입하여 임시로 골절편을 고정한다. 드릴 가이드를 관절 내로 삽입 후, poly-p-dioxanone로 만들어진 40 mm 길이의 생흡수성 핀들을 다양한 각도에서 삽입하여 골절편을 완전히 고정한다. 수술 후 슬관절을 신전시킨 상태에서 장하지 석고 고정을 4주간 시행하여 술 후 슬관절의 완전 신전이 가능하도록 한다. 결론: 전방십자인대에 의한 경골 과간부 견열 골절을 생흡수성 핀을 이용하여 관절경적으로 고정하는 술기는 기술적으로 어렵지 않으며, 골절 치유와 관절의 안정성을 얻을 수 있는 수술 방법이다.

  • PDF

성공적인 전방십자인대 재건술을 위한 적절한 이식건의 선택 (Graft Considerations for Successful Anterior Cruciate Ligament Reconstruction)

  • 경희수
    • 대한정형외과학회지
    • /
    • 제56권1호
    • /
    • pp.14-25
    • /
    • 2021
  • 성공적인 전방십자인대 재건술을 얻기 위해 수술 전 계획, 수술수기, 수술 후 재활 등 여러 가지 요소가 관여한다. 그리고 좋은 결과를 얻기 위해서 수술 중 이식건의 선택, 고정, 처리 방법, 성숙, 본체골에 병합, 장력 등을 고려해야 한다. 이식건을 선택할 때 이식건의 강도, 이식건의 고정방법, 고정부위 치유, 공유 부위 이환, 이식건의 표면적 크기 등을 고려해야 한다. 이식건에는 자가건과 동종건의 두 가지가 있다. 자가 슬개건, 슬괵건, 대퇴사두건 등 사용할 수 있는 자가건은 여러 가지가 있으며 각각의 장·단점을 가지고 있다. 최근 국내에서 동종건의 사용빈도가 높아지고 있는데 공여부의 이환이 없고, 수술 시간이 짧고, 수술 후 통증이 적고, 재료가 다양한 장점이 있다. 하지만 동종건이 자가건보다 장기간 추적 결과가 더 좋다는 보고는 없다. 동종건은 골과의 합병이 오래 걸리고, 불완전하며, 인대 재형성이 늦고, 생역학적으로 자가건보다 강도가 낮으며, 면역반응의 위험성이 높고, 질병 전파의 가능성 등 원초적인 제한점을 가지고 있다. 그래서 장기간 결과에서 실패율이 높고 이식건의 성숙도가 자가건보다 좋지 않다. 그러므로 동종건은 자가건의 대용이 될 수 있지만 자가건을 사용할 수 없을 때, 여러 가지 인대 재건술이 필요한 경우를 제외하고 자가건을 사용하도록 하는 것이 좋다. 만약 적절한 크기와 굵기의 자가건을 얻을 수 있다면 자가건을 사용한 적절한 고정방법을 선택하고 수술 후 재활을 하면 동종건을 사용한 결과보다 우수한 결과를 얻을 것으로 생각된다.

Impact of Tumor Length on Survival for Patients with Resected Esophageal Cancer

  • Mirinezhad, Seyed Kazem;Jangjoo, Amir Ghasemi;Seyednejad, Farshad;Naseri, Ali Reza;Mohammadzadeh, Mohammad;Nasiri, Behnam;Eftekharsadat, Amir Taher;Farhang, Sara;Somi, Mohammad Hossein
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권2호
    • /
    • pp.691-694
    • /
    • 2014
  • Background: Tumor length in patients with esophageal cancer (EC) has recently received great attention. However, its prognostic role for EC is controversial. The purpose of our study was to characterize the prognostic value of tumor length in EC patients and offer the optimum cut-off point of tumor length by reliable statistical methods. Materials and Methods: A retrospective analysis was conducted on 71 consecutive patients with EC who underwent surgery. ROC curve analysis was used to determine the optimal cut-off point for tumor length, measured with a handheld ruler after formalin fixation. Correlations between tumor length and other factors were surveyed, and overall survival (OS) rates were compared between the two groups. Potential prognostic factors were evaluated by univariate Kaplan-Meier survival analysis. A P value less than 0.05 was considered significant. Results: There were a total of 71 patients, with a male/female divide of 43/28 and a median age of 59. Characteristics were as follows: squamous/adenocarcinoma, 65/6; median tumor length, 4 (0.9-10); cut-off point for tumor length, 4cm. Univariate analysis prognostic factors were tumor length and modality of therapy. One, three and five year OS rates were 84, 43 and 43% for tumors with ${\leq}4cm$ length, whereas the rates were 75, 9 and 0% for tumors >4 cm. There was a significant association between tumor length and age, sex, weight loss, tumor site, histology, T and N scores, differentiation, stage, modality of therapy and longitudinal margin involvement. Conclusions: Future studies for modification of the EC staging system might consider tumor length too as it is an important prognostic factor. Further assessment with larger prospective datasets and practical methods (such as endoscopy) is needed to establish an optimal cut-off point for tumor length.

Anatomic fit of precontoured extra-articular distal humeral locking plates: a cadaveric study

  • Lim, Joon-Ryul;Yoon, Tae-Hwan;Lee, Hwan-Mo;Chun, Yong-Min
    • Clinics in Shoulder and Elbow
    • /
    • 제24권2호
    • /
    • pp.66-71
    • /
    • 2021
  • Background: Extra-articular distal humerus locking plates (EADHPs) are precontoured anatomical plates widely used to repair distal humeral extra-articular diaphyseal fractures. However, EADHPs frequently cause distal protrusion and resulting skin discomfort. The purpose of this study was to predict the occurrence of anatomic fit mismatch. We hypothesized that the smaller the humerus size, the greater the anatomic fit mismatch with EADHP. Methods: Twenty humeri were analyzed in this study. Humeral length and distal humeral width were used as parameters of humeral size. Plate protrusion was measured between the EADHP distal tip and the distal humerus. We set the level of unacceptable EADHP anatomic fit mismatch as ≥10 mm plate protrusion. Results: A significant negative linear correlation was also confirmed between humeral size and plate protrusion, with a coefficient of determination of 0.477 for humeral length and 0.814 for distal humeral width. The cutoff value of humeral length to avoid ≥10 mm plate protrusion was 293.6 mm (sensitivity, 88.9%; specificity, 81.8%) and for distal humeral width was 60.5 mm (sensitivity, 100%; specificity, 81.8%). Conclusions: Anatomic fit mismatch in distal humeral fractures after EADHP fixation has a negative linear correlation with humeral length and distal humeral width. For patients with a distal humeral width <60.5 mm, ≥10 mm plate protrusion will occur when an EADHP is used, and an alternative implant or approach should be considered.

중족근 관절의 탈구 및 골절: 증례 보고 (Fracture and Dislocation of the Midtarsal Joint: A Case Report)

  • 최준철;정유훈;박상준
    • 대한족부족관절학회지
    • /
    • 제21권3호
    • /
    • pp.108-112
    • /
    • 2017
  • The midtarsal joint is composed of the talonavicular and calcaneocuboid joints. It is also known as the Chopart joint. Midtarsal joint fracture and dislocation are relatively rare and frequently missed or misdiagnosed. A proper understanding about the anatomy of the midtarsal joint is an essential part in comprehending the mechanism of injury and rationale for treatment. Anatomical reduction of midtarsal joint with correction of the column in length and shape are important; however, it is technically challenging and may require open procedure. Herein, we described a case of initial open reduction and internal fixation for midtarsal joint fracture and dislocation with a brief literature review.