• Composites Research
• /
• 제36권4호
• /
• pp.246-252
• /
• 2023

멤브레인 형 LNG 화물창시스템(Cargo containment system, CCS) 내 유리섬유 강화 복합재료 기반 2차 방벽 설치 시 본딩 자동화 머신(automatic bonding machine, ABM) 활용한 prolonged 구조임과 동시에 양단 접착 고정 사이 비 접착(non-bonding, N-B) 영역의 복합재에서 극저온 열 수축 기인한 상당한 열 응력이 발생하기 때문에 이를 고려한 구조 안전성평가 관점에서 수행된 연구가 있으나 실제로 무한히 긴 길이 고려한 기계적 물성 평가를 수행한 연구는 찾아볼 수가 없었다. 해당 복합재는 파단강도 분산이 큰 세라믹 재료 취성 파괴임을 고려하여 2-파라미터 Weibull 통계분석을 통해 실제 길이 대상 신뢰도 있는 기계적 물성치 값을 표준화 하였으며 LNG 운반 환경을 고려한 극저온 환경까지의 특정 온도별 단축 인장실험을 수행하였다. 실험결과, -70℃에서 기계적 강도가 -20℃에 비해 약 1.5배 급증하고 초기 권축 섬유 신장의 비선형 거동이 억제되었다. 또한, 극저온 환경까지 온도가 낮아질수록 기계적 강도는 계속해서 증가하였으나 반대로 연신은 줄어드는 저온 취성의 현상이 확인되었다. 본 연구에서 제시하는 기계적 물성치 데이터는 멤브레인 형 LNG 화물창 구조 안전성 평가 시 신뢰도 높은 해석 지원 물성치 확보 측면에서 유용하게 적용되어지리라 사료된다.

• 원예과학기술지
• /
• 제33권4호
• /
• pp.518-524
• /
• 2015

'설향' 딸기 차근육묘에서 팽연왕겨 배지의 깊이 및 착근시기가 자묘의 생장과 본포 정식 후 초기 생장에 미치는 영향을 구명하고자 본 연구를 수행하였다. 배지 깊이에 따른 자묘 생장에서 초장은 50, 70, 및 90mm 처리가 컸고, 엽수, 관부 직경, 및 1차 근수는 처리별 차이가 인정되지 않았다. 뿌리 생체중은 배지 깊이를 70, 90, 및 110mm로 조절한 처리가 30 또는 50mm로 조절한 처리들 보다 뚜렷하게 무거웠고, 근장은 90과 110mm 처리가 가장 길었다. 지상부 생체중은 70mm 처리에서 가장 무거웠고 이 보다 얕거나 깊은 배지 깊이 처리들에서 생장량이 적어졌다. 착근시기에 영향을 받은 자묘의 생장에서 착근 시기가 빠를수록 초장, 엽면적, 관부 직경 및 생체중 등 생장이 우수하였다. 그러나 1차 근수 및 뿌리 생체중은 7월 1일, 7월 15일 및 8월 1일의 세 처리간 통계적인 차이가 인정되지 않았다. 착근시기가 빠를수록 근권의 왕겨 부착량이 많았으며, 체 진동기를 사용하여 왕겨의 제거율을 조사한 결과 7월 1일과 7월 15일 처리는 40% 미만, 8월 1일 및 8월 15 처리는 각각 64% 및 70%로써 정식 시 왕겨 제거를 위한 노동력 요구도가 높았다. 착근시기가 다른 자묘를 본포에 정식하고 45일 후 생육을 조사한 결과 7월 1일 및 15일 그리고 8월 1일 착근한 처리의 1화방 출뢰율은 93-100%, 8월 15일 처리는 67% 였다. 본 실험 결과 팽연왕겨 차근육묘의 적절한 배지 깊이는 70mm, 그리고 착근시기는 7월 20-25일이며, 이상의 결과를 활용하여 육묘농가의 시행착오가 감소하고 양질묘가 생산될 수 있다고 예상한다.

• Journal of Korean Neurosurgical Society
• /
• 제30권7호
• /
• pp.883-890
• /
• 2001

Objectives : An in vitro biomechanical study of posterior lumbar interbody fusion(PLIF) with threaded cage using two different approaches was performed on eighteen functional spinal units of bovine lumbar spines. The purpose of this study was to compare the segmental stiffnesses among PLIF with one long posterolateral cage, PLIF with one long posterolateral cage and simultaneous facet joint fixation, and PLIF with two posterior cages. Methods : Eighteen bovine lumbar functional spinal units were divided into three groups. All specimens were tested intact and with cage insertion. Group 1(n=12) had a long threaded cage($15{\times}36mm$) inserted posterolaterally and oriented counter anterolaterally on the left side by posterior approach with left unilateral facetectomy. Group 2(n=6) had two regular length cages($15{\times}24mm$) inserted posteriorly with bilateral facetectomy. Six specimens from group 1 were then retested after unilateral facet joint screw fixation in neutral(group 3). Likewise, the other six specimens from group 1 were retested after fixation with a facet joint screw in an extended position(group 4). Nondestructive tests were performed in pure compression, flexion, extension, lateral bending, and torsion. Results : PLIF with a single cage, group 1, had a significantly higher stiffnesses than PLIF with two cages, group 2, in left and right torsion(p<0.05). Group 1 showed higher stiffness values than group 2 in pure compression, flexion, left and right bending but were not significantly different. Group 3 showed a significant increase in stiffness in comparison to group 1 for pure compression, extension, left bending and right torsion(p<0.05). For group 4, the stiffness significantly increased in comparison to group 1 for extension, flexion and right torsion(p<0.05). Although there was no significant difference between groups 3 and 4, group 4 had increased stiffness in extension, flexion, right bending and torsion. Conclusion : Posterior lumbar interbody fusion with a single long threaded cage inserted posterolaterally with unilateral facetectomy enables sufficient decompression while maintaining a majority of the posterior elements. In combination with a facet joint screw fixation, adequate postoperative stability can be achieved. We suggest that posterolateral insertion of a long threaded cage is biomechanically an ideal alternative to PLIF.

• Journal of Korean Neurosurgical Society
• /
• 제56권6호
• /
• pp.475-481
• /
• 2014

Objective : To evaluate the anatomical feasibility of 3.5 mm screw into the cervical spine in the pediatric population and to establish useful guidelines for their placement. Methods : A total of 37 cervical spine computerized tomography scans (24 boys and 13 girls) were included in this study. All patients were younger than 10 years of age at the time of evaluation for the period of 2007-2011. Results : For the C1 screw placement, entry point height (EPH) was the most restrictive factor (47.3% patients were larger than 3.5 mm). All C2 lamina had a height larger than 3.5 mm and 68.8% (51/74) of C2 lamina had a width thicker than 3.5 mm. For C2 pedicle width, 55.4% (41/74) of cases were larger than 3.5 mm, while 58.1% (43/74) of pedicle heights were larger than 3.5 mm. For pedicle width of subaxial spine, 75.7% (C3), 73% (C4), 82.4% (C5), 89.2% (C6), and 98.1% (C7, 1/54) were greater than 3.5 mm. Mean lamina width of subaxial cervical spine was 3.1 (C3), 2.7 (C4), 2.9 (C5), 3.8 (C6), and 4.0 mm (C7), respectively. Only 34.6% (127/370) of subaxial (C3-7) lamina thickness were greater than 3.5 mm. Mean length of lateral mass for the lateral mass screw placement was 9.28 (C3), 9.08 (C4), 8.81 (C5), 8.98 (C6), and 10.38 mm (C7). Conclusion : C1 lateral mass fixation could be limited by the morphometrics of lateral mass height. C2 translamina approach is preferable to C2 pedicle screw fixation. In subaxial spines, pedicle screw placement was preferable to trans-lamina screw placement, except at C7.

• Journal of Korean Neurosurgical Society
• /
• 제51권1호
• /
• pp.14-19
• /
• 2012

Objective : The authors performed a retrospective study to assess the clinical and radiological outcome in symptomatic lumbar spondylolysis patients who underwent a direct pars repair surgery using two different surgical methods; pedicle screw with universal hook system (PSUH) and direct pars screw fixation (DPSF), and compared the results between two different treated groups. Methods : Forty-seven consecutive patients (PSUH; 23, DPSF; 15) with symptomatic lumbar spondylolysis who underwent a direct pars repair surgery were included. The average follow-up period was 37 months in the PSUH group, and 28 months in the DPSF group. The clinical outcome was measured using visual analogue pain scale (VAS) and Oswestry disability index (ODI). The length of operation time, the amount of blood loss, the duration of hospital stay, surgical complications, and fusion status were also assessed. Results : When compared to the DPSF group, the average preoperative VAS and ODI score of the PSUH group were less decreased at the last follow-up; (the PSUH group; back VAS : 4.9 vs. 3.0, leg VAS : 6.8 vs. 2.2, ODI : 50.6% vs. 24.6%, the DPSF group; back VAS : 5.7 vs. 1.1, leg VAS : 6.1 vs. 1.2, ODI : 57.4% vs. 18.2%). The average operation time was 174.9 minutes in the PSUH group, and 141.7 minutes in the DPSF group. The average blood loss during operation was 468.8 cc in the PSUH group, and 298.8 cc in the DPSF group. The average hospital stay after operation was 8.9 days in the PSUH group, and 7 days in the DPSF group. In the PSUH group, there was one case of a screw misplacement requiring revision surgery. In the DPSF group, one patient suffered from transient leg pain. The successful bone fusion rate was 78.3% in the PSUH group, and 93.3% in the DPSF group. Conclusion : The present study suggests that the technique using direct pars screw would be more effective than the method using pedicle screw with lamina hook system, in terms of decreased operation time, amount of blood loss, hospital stay, and increased fusion success rate, as well as better clinical outcome.

• 한국토양비료학회지
• /
• 제20권3호
• /
• pp.269-274
• /
• 1987

간척지(干拓地) 토양(土壤)의 잡초(雜草) 및 수도근(水稻根) 조직(組織)에서 분리동정(分離同定)한 수종(數種)의 협생질소고정균(協生窒素固定菌)을 질소(窒素)를 함유(含有)하지 않은 순수배양(純粹培養) 내(內)에서 재배형(栽培型) 및 품종(品種)이 상이(相異)한 수도종자권(水稻種子圈)에 접종(接種)하여 수도(水稻)의 건물중(乾物重), 초장(草長), 근장(根長), 근수등(根數等)의 생육특징(生育特徵)과 협생질소고정력(協生窒素固定力)을 조사(調査)한 결과(結果) 수도품종(水稻品種) 및 협생질소고정균(協生窒素固定菌)의 조합간(組合間) 교호작용(交互作用)은 통계적(統計的)으로 유의(有意)한 상관관계(相關關係)를 보이지 않했다. 그러나 공시수도품종중(供試水稻品種中)에서 Annapuruna는 7종(種)의 협생질소고정균(協生窒素固定菌)을 접종(接種)하므로써 생육량(生育量) 증가(增加)를 보였다. 그리고 7종(種)의 협생질소고정균(協生窒素固定菌)을 교호접종(交互接種)했을때 협생질소고정력(協生窒素固定力)은 Annapuruna와 신광(新光)벼 조합(組合)에서 가장 높았으며 IR-8이 가장 낮았다. 또한 협생질소고정균(協生窒素固定菌)과 수도품종간(水稻品種間)에는 신광(新光)벼와 Pseudomonas sp. H8 조합(組合)에서 질소고정력(窒素固定力)이 가장 높았다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제35권4호
• /
• pp.229-239
• /
• 2009

The purpose of this study is to evaluate the change in condylar position, width, and angle before and after orthognathic surgery using 3-dimensional computed tomograph. Pre and posterative 3-D CT was taken on 38 patients and through axial, frontal, sagittal measurements and by 3-dimensional reconstruction, the changes in condylar postion, mandibular width and angle were analyzed and others such as the difference in gender, operation and fixation method, setback length and in relation with temporomandibular disorders were done together too. The results were as follows: The inward rotation of condyle in axial condylar angle, the forward movement of right condyle in sagittal anterior-posterior distance, the superior movement of both condyles in sagittal superior-inferior distance, the decrease in gonial angle, the increase in mandibular width, the decrease in distance between the axial coronoid process distance and the increase in the frontal intercondylar distance were statistically significant. There were no statistically significant changes in gender difference, however in the difference in operation method, change in the gonial angle was observed and there was more change in bilateral sagittal split osteotomy group compared to two-jaw surgery group. In the difference in fixation method, the decrease in axial coronoid process distance and the change in sagittal anterior-posterior distance were statistically significant. In the difference in setback, the increase in setback didn't relate directly with the increased change in condyle position. In the relation with temporomandibular disorder, changes in left axial condylar angle and axial coronoid process distance were statistically significant. Changes in condylar position could be observed after the orthognathic surgery but it doesn't seem to have much of a clinical importance. The orthognathic surgery is effective in decreasing the mandibular angle, and it is not related with the temporomandibular disorder.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제43권2호
• /
• pp.77-82
• /
• 2017

Objectives: The aim of this study was to compare the mechanical resistance of four different osteosyntheses modeled in two different sagittal split ramus osteotomy (SSRO) designs and to determine the linear loading in a universal testing machine. Materials and Methods: An in vitro experiment was conducted with 40 polyurethane hemimandibles. The samples were divided into two groups based on osteotomy design; Group I, right angles between osteotomies and Group II, no right angles between osteotomies. In each group, the hemimandibles were distributed into four subgroups according to the osteosynthesis method, using one 4-hole 2.0 mm conventional or locking plate, with or without one bicortical screw with a length of 12.0 mm (hybrid technique). Each subgroup contained five samples and was subjected to a linear loading test in a universal testing machine. Results: The peak load and peak displacement were compared for statistical significance using PASW Statistics 18.0 (IBM Co., USA). In general, there was no difference between the peak load and peak displacement related to osteotomy design. However, when the subgroups were compared, the osteotomy without right angles offered higher mechanical resistance when one conventional or locking 2.0 mm plate was used. One locking plate with one bicortical screw showed higher mechanical resistance ($162.72{\pm}42.55N$), and these results were statistically significantly compared to one conventional plate with monocortical screws (P=0.016) and one locking plate with monocortical screws (P=0.012). The difference in peak displacement was not statistically significant based on osteotomy design or internal fixation system configuration. Conclusion: The placement of one bicortical screw in the distal region promoted better stabilization of SSRO. The osteotomy design did not influence the mechanical behavior of SSRO when the hybrid technique was applied.

• Journal of Korean Neurosurgical Society
• /
• 제60권5호
• /
• pp.498-503
• /
• 2017

Objective : The purpose of the present study was to compare inter-fragmentary compression pressures after fixation of a simulated type II odontoid fracture with the headless compression Herbert screw and a half threaded cannulated lag screw. Methods : We compared inter-fragmentary compression pressures between 40- and 45-mm long 4.5-mm Herbert screws (n=8 and n=9, respectively) and 40- and 45-mm long 4.0-mm cannulated lag screws (n=7 and n=10, respectively) after insertion into rigid polyurethane foam test blocks (Sawbones, Vashon, WA, USA). A washer load cell was placed between the two segments of test blocks to measure the compression force. Because the total length of each foam block was 42 mm, the 40-mm screws were embedded in the cancellous foam, while the 45-mm screws penetrated the denser cortical foam at the bottom. This enabled us to compare inter-fragmentary compression pressures as they are affected by the penetration of the apical dens tip by the screws. Results : The mean compression pressures of the 40- and 45-mm long cannulated lag screws were $50.48{\pm}1.20N$ and $53.88{\pm}1.02N$, respectively, which was not statistically significant (p=0.0551). The mean compression pressures of the 40-mm long Herbert screw was $52.82{\pm}2.17N$, and was not statistically significant compared with the 40-mm long cannulated lag screw (p=0.3679). However, 45-mm Herbert screw had significantly higher mean compression pressure ($60.68{\pm}2.03N$) than both the 45-mm cannulated lag screw and the 40-mm Herbert screw (p=0.0049 and p=0.0246, respectively). Conclusion : Our results showed that inter-fragmentary compression pressures of the Herbert screw were significantly increased when the screw tip penetrated the opposite dens cortical foam. This can support the generally recommended surgical technique that, in order to facilitate maximal reduction of the fracture gap using anterior odontoid screws, it is essential to penetrate the apical dens tip with the screw.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권3호
• /
• pp.12-20
• /
• 2023

본 연구에서는 영구 교좌장치가 설치되는 교량의 교각 상부에서 FCM에 의한 상부공 시공에 주로 적용하고 있는 "내부 프리스트레싱 긴장재에 의한 임시 고정시스템"에서 강봉에 도입한 긴장력의 변화와 주두부의 기울음 특성을 분석하여 안정성 확보 방안에 대한 기초자료를 제시하였다. 상기 시스템은 시공 중 불균형 모멘트에 의하여 발행하는 상향력에 저항하기 위하여 교각과 교각 상부의 PSC BOX 내부에 연직으로 강봉을 설치한 후 상부에서 인장 및 정착하기 때문에, 그 동안 강봉에 도입한 긴장력의 변화와 주두부의 기울음 정도를 확인하기 어려웠다. 따라서, 강봉의 길이 변화 및 주두부 변위에 대한 계측 및 분석은 미세 측정이 가능한 FBG 센서를 활용하여 각 세그먼트 진행의 전후에 수행하였다. 강봉의 계산 인장력과 잔존 인장력을 비교한 결과 안전율은 모든 교량에서 저하하였다. 그 원인은 주로 강봉의 정착 과정에서부터 1세그먼트 완료까지의 초기 긴장력 손실로 확인되어 이에 대한 대책을 제시하였다. 주두부의 미세 기울음 특성을 분석한 결과 안전율이 충분히 확보된 교량에서도 세그먼트의 진행에 따라 미세 기울음이 증가되는 양상을 보였으며, 세그먼트 진행 단계별로 콘크리트 타설 전,후의 차이도 뚜렸하게 확인되었다. 또한, 모든 교량에서 미세 기울음의 증가는 강봉의 긴장력 손실과 밀접한 관계를 보이며 기울음 측면과 반대 측면의 응력 감소가 더욱 크게 나타났다. 이러한 현상의 원인은 불균형모멘트에 의하여 기울음 측면과의 반대 측면의 강봉에 상향 인장력이 발생하여 강봉의 응력 차이를 유발시킨 때문으로 판단된다.