• 조명전기설비학회논문지
• /
• 제27권6호
• /
• pp.9-16
• /
• 2013

This paper presents an operating characteristics of the 5-phase 5kW with developed the surface permanent magnetic synchronous generato (SPMSG) in order to make a study of a polyphase ac motors keeping hold of more advantages. There are shown a amplitude and waveform of the generated electromotive force, in FFT analysis of harmonics, within output voltages, and reviewing a experiment results in no-load test, resistive load, and inductive load using 5-phase induction motor by variable output frequency. The operating characteristics of the developed manufacturing generator include voltage regulation, efficiency, power factor, THD, and so on at rated load.

• 한국자기학회지
• /
• 제27권1호
• /
• pp.9-17
• /
• 2017

다상 전동기는 기존의 3상 전동기와 비교하여 높은 신뢰성과 성능의 이점 때문에 고 신뢰성을 요하는 전장과 특수기기 분야에서 많은 관심을 갖고 있다. 본 연구에서는 다상 전동기들 중 5상 영구자석 동기 전동기를 이용하여 전동기 제어의 주요 변수인 자기 인덕턴스와 상호 인덕턴스를 수식을 통한 추정 방법을 다룬다. 최근 대부분의 고효율 구동 전동기들은 FOC(Field Orinted Control)와 DTC(Direct Torque Control) 제어를 이용하므로 전압 방정식에서 가장 중요한 인덕턴스를 정확하게 추정하는 것이 중요하다. 인덕턴스를 수식적으로 계산하기 위해서 본 연구에서는 WFT(Winding Function Theory)를 적용하였다. 계산된 인덕턴스의 결과 값의 타당성 유무를 확인하기 위하여 유한요소해석과 비교 하였으며 약 3%의 편차를 가지는 것을 확인하였다. 최종적으로 WFT를 이용하여 계산된 인덕턴스를 FOC와 DTC 제어에 필요한 값인 d축과 q축 인덕턴스로 변환하는 과정을 소개한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.210-212
• /
• 2005

최근 급속도로 발전하고 있는 산업분야에서 요구되는 서보 시스템에서 빠른 응답특성, 고도의 정밀성 그리고 안전성에 대한 요구가 커지고 있는 실정이다. 본 논문에서는 이러한 요구에 따라 5상 IPM(Five-phase IPM)의 DTC(Direct torque control)에 대해 고찰하였으며, Texas Instruments사에서 전동기 제어 전용으로 개발된 DSP칩인 TMS320F2812를 이용하여 디지털적으로 제어 알고리즘을 구성하였다. 5상 전동기는 현재 산업현장에서 일반적으로 널리 사용되고 있는 삼상 전동기에 비해 안정성이 높고, 상당 전압의 변화 없이 고정자 전류를 줄일 수 있고, 토크 맥동의 주파수를 높이고 결과적으로 토크의 크기를 감소시킬 수 있다는 여러 가지 장점을 가지고 있으며, 특히 안정성을 요구하는 항공기(Aerospace applications), 전기자동차 및 하이브리드 자동차(Electric or hybrid vehicles)등의 특수한 영역에서 요구가 계속 증가되고 있다. 따라서 본 논문에서는 5상 IPM의 DTC에 대한 특성을 실험을 통하여 확인하였다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1650-1658
• /
• 2018

Multilevel converters are being widely used in medium-voltage high-power applications including motor drive systems, utility power transmission, and distribution systems. Selective harmonic elimination (SHE) is a well-known modulation method to generate high quality output voltage waveforms. This paper presents a new simple practical method for generating a generalized five-level waveform without selected low order harmonics. This method is based on a phase-shifted expression for the SHE problem, which can analytically calculate the exact values of switching angles and the feasible modulation index range for three-level and five-level waveforms. The proposed method automatically determines the number of transitions between levels and generates proper output waveform without solving complex trigonometric equations. Due to the simplicity of the computational burden, the real-time implementation of the proposed algorithm can be performed by a simple processor. Simulation and experiment results verify the correctness and effectiveness of the proposed method.

• 조명전기설비학회논문지
• /
• 제20권8호
• /
• pp.54-62
• /
• 2006

3상 4선식 전원공급 시스템에서 단상 및 3상 부하의 운전하에서 전압 불평형은 부하의 불평형 운전에 의해 발생되고, 전류 불평형은 떨어진 전압 품질에 의해 더욱 심해진다. 에너지 변환장치로 사용되는 여러 형태의 컨버터는 3상 4선식 배전시스템에 직접적으로 고조파 전류를 주입함으로서 고조파 왜란을 증가시킨다. 고조파 전류는 전동기 출력 토크를 감소시키고, 전동기를 과열 또는 소음을 증가시키며 회전자에 토크 맥동을 증가하여 기계적인 공진과 진동을 발생하는 등 여러 가지 부작용을 낳고 있다. 따라서 본 논문은 3상 4선식 배전시스템에서 선형 및 비선형 부하의 혼합 운전시 불평형과 고조파 성분에 의해 유도전동기의 특성 변화에 대한 연구로서 선형 단독운전, 비선형 부하 결합에 따른 특성 변화를 해석한 것으로서 단상 비선형 부하의 추가 운전시 5 고조파 필터로도 저감이 어려운 고조파로 인해 토크 맥동 횟수는 줄고 리플값은 증가함을 확인할 수 있었다.

• Journal of Power Electronics
• /
• 제17권1호
• /
• pp.161-171
• /
• 2017

To enhance the reliability of two-motor drive systems, this paper proposes an improved direct torque control (DTC) scheme (P-DTC) for five-leg dual-PMSM drive systems. First, the topology of a five-leg dual-PMSM drive system is illustrated. To clarify the analysis of the P-DTC, the standard DTC scheme for three-phase drive systems is presented. The operation of a five-leg dual-PMSM drive system is classified into three situations according to the definitions of the switching-vector unions. Compared with the existing DTC scheme (R-DTC), the P-DTC can minimize the replacement of active switching-vectors to zero switching-vectors. When this replacement cannot be avoided, the P-DTC uses a proposed master-slave selection principle to minimize the system error. Comparing with the R-DTC, the P-DTC has lower torque ripples, a wider speed range and a faster torque increasing response. Experiments have been carried out in the coupling and independent modes, and the effectiveness of the P-DTC is verified by the obtained results.

• ETRI Journal
• /
• 제28권1호
• /
• pp.111-114
• /
• 2006

An alternative human interface enabling people with severe motor disabilities to control an assistive system is presented. Since this interface relies on the biosignals originating from the contraction of muscles on the face during particular movements, even individuals with a paralyzed limb can use it with ease. For real-world application, a dedicated hardware module employing a general-purpose digital signal processor was implemented and its validity tested on an electrically powered wheelchair. Furthermore, an additional attempt to reduce error rates to a minimum for stable operation was also made based on the entropy information inherent in the signals during the classification phase. In the experiments, most of the five participating subjects could control the target system at their own will, and thus it is found that the proposed interface can be considered a potential alternative for the interaction of the severely disabled with electronic systems.

• 제어로봇시스템학회논문지
• /
• 제21권5호
• /
• pp.407-412
• /
• 2015

This paper presents the design of a lab-built powered knee prosthesis based on a BLDC motor, a sensored impedance control using a force sensor, and a sensorless impedance control through torque estimation. Firstly, we describe the structure of the lab-built powered knee prosthesis and its limitations. Secondly, we decompose the gait cycle into five stages and apply the position-based impedance control for the powered knee prosthesis. Thirdly, we perform an experiment for the torque estimation and the sensorless impedance control of the prosthesis. The experimental results show that we can use the torque estimation to control the low impedance during the swing phase, although the estimated torque data has a delay compared with the measured torque by a load cell.

• Journal of Electrical Engineering and Technology
• /
• 제3권4호
• /
• pp.538-545
• /
• 2008

This paper attempts to summarize torque control strategy for high performance SR drive. There are primarily two strategies for torque control. One method is direct torque control, which uses the simple control scheme and hysteresis controller to reduce the torque ripple. Another method is indirect torque control, which uses the complicated algorithms or simple distribution function to distribute each phase torque and obtain current command. The current controller is used to control phase torque by a given current command. In order to compare these two strategies of torque control, five torque control methods are introduced. The advantages and disadvantages of each method are presented. At last, they are verified by some simulations and experimental results.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.193-199
• /
• 2014

In this paper, we present an overview of the structure of a lab-built powered knee prosthesis and the control of it. We build a powered prosthesis prototype on the basis of previous researches and aim at obtaining the essential technology related with its control. We adopt the slider-crank mechanism with a DC motor as an actuator to manipulate the knee joint. We also build an embedded control system for the prosthesis with a 32-bit DSP controller as a main computation unit. We divide the gait phase into five stages and use a FSM (Finite State Machine) to generate a torque reference needed for each stage. We also propose to use a position-based impedance controller for driving the powered knee prosthesis stably. We perform some walking experiments at fixed speeds on a tread mill in order to show the feature of the built powered prosthesis. The experimental results show that our prosthesis has the ability to provide a functional gait that is representative of normal gait biomechanics.