• YAKHAK HOEJI
• /
• v.32 no.3
• /
• pp.170-176
• /
• 1988

The resolution of five amino acids derivatives by gas chromatography on phenylthiohydantoin derivatives as chiral stastionary phase was investigated. (S)-5-isopropyl, isobutyl, (sec)-butyl and benzoyl derivatives of $N^3-phenyl-2-thiohydantoin$ were synthesized from L-valine, L-leucine, L-isoleucine and L-phenylalanine, respectively. The phases were employed at several column temperatures ($140^{\circ}C{\sim}210^{\circ}C$). The separation factors were compared with each stationary phase with varying R groups. The possible mechanism of chiral recognition was investigated by NMR technique.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.537-539
• /
• 2003

We present a GPS-derived regional ionosphere model, which estimates Total Electron Content (TEC) in rectangular grids on the spherical shell over Korea. The GPS data from nine GPS stations were used. The pseudorange data were phase-leveled by a linear combination of pseudoranges and carrier phases. During a quiet day of solar activity, the regional ionosphere map indicated 30-45 Total Electron Content Unit (TECU) at the peak of the diurnal variation. In comparison with the Global Ionosphere Map of the Center for Orbit Determination in Europe, RMS differences were at the level of 4-5 TECU for five days.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.2
• /
• pp.111-118
• /
• 2007

We have studied energetic neutral atom (ENA) disturbances during the magnetic storm main phase that occurred on October 3,2001, using the ENA data from the HENA instrument onboard the IMAGE spacecraft. We find that the main phase is characterized by five ENA enhancement events that occurred quasi-periodically. The repetitive ENA enhancements are most significant in the highest energy (138-222 keV) oxygen channel and become less significant for hydrogen and in lower energies. Also they are separated by ${\sim}1.2$ to ${\sim}1.7$ hrs, which is well below an average period usually seen for other repetitive injection events.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1078-1085
• /
• 2013

This paper presents a novel topology for cascaded transformer sub-multilevel converter. Eachsub-multilevel converter consists of two DC voltage sources with six switches to achieve five-level voltage. The proposed topology results in reduction of DC voltage sources and switches number. Single phase low frequency transformers are used in proposed topology and voltage transformation and galvanic isolation between load and sources are given by transformers. This topology can operate as symmetric or asymmetric converter but in this paper we have focused on symmetric state. The operation and performance of the suggested multilevel converter has been verified by the simulation results of a single-phase nine-level multilevel converter using MATLAB/SIMULINK.

• Asia pacific journal of information systems
• /
• v.5 no.2
• /
• pp.101-129
• /
• 1995

This paper proposes a form-based distributed database design methodology ($FD^3$). The methodology consists of five design phases such as (i) form requirement analysis (ii) schema integration (iii) distribution analysis (iv) distribution design, and (v) local logical/physical design. In the $FD^3$, all the important design information for each phase is obtained by using an organizations forms, Users requirements are analyzed by using forms that contain logical and quantitative information for distribution design. $FD^3$ resolves naming conflicts by employing SQLs based on the form field data in the schema integration phase. Furthermore, $FD^3$ enhances the quality of distributed database design by incorporating communication costs into the design model. A real-life case is illustrated to demonstrate the usefulness of the $FD^3$.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.4
• /
• pp.538-545
• /
• 2008

This paper attempts to summarize torque control strategy for high performance SR drive. There are primarily two strategies for torque control. One method is direct torque control, which uses the simple control scheme and hysteresis controller to reduce the torque ripple. Another method is indirect torque control, which uses the complicated algorithms or simple distribution function to distribute each phase torque and obtain current command. The current controller is used to control phase torque by a given current command. In order to compare these two strategies of torque control, five torque control methods are introduced. The advantages and disadvantages of each method are presented. At last, they are verified by some simulations and experimental results.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.121-126
• /
• 2014

The accurate determination of induction motor efficiency depends on the estimation of the five losses of stator and rotor copper loss, iron loss, mechanical loss and stray load loss. As the mechanical and stray load losses are not calculated by electro-magnetic analysis, the values of these two losses are very important in induction motor design. In this paper, the values of mechanical loss and stray load loss are proposed through investigating testing data from commercial products of three phase induction motors under 37kW. If the values of this paper are applied to motor design, the accuracy of design and analysis can be improved. The losses of motors are obtained by using load and no-load test results following IEC 60034-2-1 standard.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.55-56
• /
• 2010

다상 유도 전동기(Multi phase induction motor)의 고성능 제어를 수행하기 위해서는 정확한 파라미터 계산이 필수적이다. 특히 전동기의 벡터제어(FOC, Field oriented control)나 직접토크제어(DTC, Direct torque control)와 같은 고성능 제어 시스템의 경우, 슬립 계산이나 자속관측기 그리고 PI 제어기 게인 추정에서 전동기 상수들이 필수적으로 사용된다. 본 논문에서는 실험용으로 집중권(Concentrated winding) 구조를 가지는 2kW, 5상 유도전동기를 제작하였으며, 5상 유도전동기 파라미터 추정에 대한 방법을 제시하였다. 일반적으로 다상 유도전동기의 경우 1차 공간 고조파(1st space harmonic) 성분에 대한 파라미터만을 추정하여 제어에 사용하지만, 본 논문에서는 1차 공간 고조파 성분과 3차 공간 고조파(3rd space harmonic) 성분에 대한 파라미터 추정 방법을 제시한다. 결과적으로 제안된 파라미터 추정 방법의 타당성을 확인하기 위해서 설계값과 실험값을 비교하였다.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.21-27
• /
• 2011

In this paper, an approach to reduce common-mode voltage (CMV) at the output of multilevel inverters using a phase opposition disposed (POD) sinusoidal pulse width modulation (SPWM) technique is proposed. The SPWM technique does not require computations therefore, this technique is easy to implement on-line in digital controllers. A good tradeoff between the quality of the output voltage and the magnitude of the CMV is achieved in this paper. This paper realizes the implementation of a POD-SPWM technique to reduce CMV using a five-level diode clamped inverter for a three phase induction motor. Experimental and simulation results demonstrate the feasibility of the proposed technique.

• Mass Spectrometry Letters
• /
• v.2 no.1
• /
• pp.20-23
• /
• 2011

The purpose of this study is to investigate the in vitro metabolism of hesperetin, a bioflavonoid. Hesperetin was incubated with rat liver microsomes in the presence of NADPH and UDP-glucuronic acid for 30 min. The reaction mixture was analyzed by liquid chromatography-ion trap mass spectrometer and the chemical structures of hesperetin metabolites were characterzed based on their MS/MS spectra. As a result, a total of five metabolites were detected in rat liver microsomes. The metabolites were identified as a de-methylated metabolite (eriodictyol), two hesperetin glucuronides, and two eriodictyol glucuronides.