• Composites Research
• /
• v.32 no.3
• /
• pp.141-147
• /
• 2019

In this study, micro-sized and nano-sized pure aluminum (Al) powders were compressed by unidirectional pressure at room temperature. Although neither type of Al bulk was heated, they had a high relative density and improved mechanical properties. The microstructural analysis showed a difference in the process of densification according to particle size, and the mechanical properties were measured by the Vickers hardness test and the nano indentation test. The Vickers hardness of micro Al and nano Al fabricated in this study was five to eight times that of ordinary Al. The grain refinement effect was considered to be one of the strengthening factors, and the Hall-Petch equation was introduced to analyze the improved hardness caused by grain size reduction. In addition, the effect of particle size and dispersion of aluminum oxide in the bulk were additionally considered. Based on these results, the present study facilitates the examination of the effect of particle size on the mechanical properties of compacted bulk fabricated by the powder metallurgy method and suggests the possible way to improve the mechanical properties of nano-crystalline powders.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.211-211
• /
• 2022

Amaranth is a nutritious and broadly adapted seed crop in high demand around the world. A preliminary approach for understanding the genetics of amaranth resources entails a morphologic characterization, which can provide the basis for breeding the first variety in Korea, leading to satisfying the needs of farmers and consumers. Therefore, this study aimed to evaluate the phenotypic characteristics of ten genetic amaranth accessions for the selection of outstanding accessions in terms of yield and grain quality. A randomized complete block design was used, with fifteen replications for each accession under field conditions. Five quantitative and three qualitative descriptors were evaluated with descriptive analysis. The results showed that the accessions with plant heights smaller than the average (>112.7 cm) presented lower yields and smaller seed sizes, thus decreasing the grain quality. The cluster analyses established groups of accessions with good yields (>30.1 g of seeds per plant) and stable morphological characteristics. Based on yield and morphological descriptors, the proposed selection index indicated four accessions as potential parents for amaranth breeding programs in Kora.

• Korean Journal of Agricultural Science
• /
• v.50 no.3
• /
• pp.457-468
• /
• 2023

The purpose of this study is to develop a high-speed combine harvester. The performance was evaluated by composing a dynamic simulation model of a threshing cylinder and analyzing the amount of threshed rice grain during threshing operations. The rotational speed of the threshing cylinder was set at 10 rpm intervals from 500 rpm until 540 rpm, based on the rated rotational speed of 507 rpm. The rice stem model was developed using the EDEM software using measured rice stem properties. Multibody dynamics software was utilized to model the threshing cylinder and tank comprising five sections below the threshing cylinder, and the threshing performance was evaluated by weighing the grain collected in the threshing tank during threshing simulations. The simulation results showed that section 1 and 2 threshed more grains compared to section 3 and 4. It was also found that when the threshing speed was higher, the larger number of grains were threshed. Only simulation was conducted in this study. Therefore, the validation of the simulation model is required. A comparative analysis to validate the simulation model by field experiment will be conducted in the future.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.2
• /
• pp.99-114
• /
• 2020

The characteristics of the Brazilian tensile strengths(σ_t) parallel to the rock cleavages in Jurassic granite from Geochang were analysed. The evaluation for the six directions of rock cleavages was performed using the parameter values on microcrack length and the above strength. The strength values of the five test specimens belonging to each direction were classified into five groups. The strength values of these five groups increase in order of group A < B < C < D < E. The close dependence between the above microcrack and strength was derived. The analysis results of this study are summarized as follows. First, the chart showing the variation and characteristics of strength among the three rock cleavages were made. In the above chart, the strength values of six directions belonging to each group were arranged in order of rift(R1 and R2), grain(G1 and G2) and hardway(H1 and H2). The strength distribution lines of the five groups concentrate in the direction of R1. And the widths among the above five lines indicating strength difference(Δσ_t) are the most narrowest in R1 direction. From the related chart, the variation characteristics among the two directions forming each rock cleavage were derived. G2(2)-test specimen shows higher value and lower value of the difference in strength compared to the case of G1(1)-test specimen. These kinds of phenomena are the same as the case between the test specimen H2(2) and H1(1). The strength characteristics of the above test specimens (2) suggest lower microcrack density value and higher degree of uniformity in the distribution of microcracks arrayed parallel to the loading direction compared to those of test specimens (1). The six strength values belonging to each group were arranged in increasing order in the above chart. The strength values of the test specimens belonging to both group D and E appear in order of R1 < R2 < G1 < H1 < G2 < H2. Therefore, the strength values of group D and E can be indicator values for evaluating the six directions of rock cleavages. Second, the correlation chart between slope angle(θ) and strength difference(Δσ_t) were made. The values of the above two parameters were obtained from the five strength distribution lines connecting between the two directions. From the chart related to rift plane(G1-H1, R'), grain plane(R1-H2, G') and hardway plane(R2-G2, H'), the slope values of linear functions increase in order of R'(0.391) < G'(0.470) < H'(0.485). Among three planes, the charts related to hardway plane show the highest distribution density among the five groups. From the related chart for rift(R1-R2, R), grain(G1-G2, G) and hardway(H1-H2, H), the slope values of linear functions increase in order of rift(0.407) < hardway(0.453) < grain(0.460). Among three rock cleavages, the charts related to rift show the highest frequency of groups belonging to the lower region. Taken together, the width of distribution of the slope angle among the three planes and three rock cleavages increase in order of H' < G < R' < R < G' < H. Third, the correlation analysis among the parameters related to microcrack length and the tensile strengths was performed. These parameters may include frequency(N), total length(Lt), mean length(Lm), median length(Lmed) and density(ρ). The correlation charts among individual parameters on the above microcrack(X) and corresponding five levels of tensile strengths for the five groups(Y) were made. From the five kinds of correlation charts, the values of correlation coefficients(R²) increase along with the five levels of strengths. The mean values of the five correlation coefficients from each chart increase in order of 0.22(N) < 0.34(Lt) < 0.38(ρ) < 0.57(Lmed) < 0.58(Lm). Fourth, the correlation chart among the corresponding maximum strength for group E(X) and the above five parameters(Y) were made. From the related chart, the values of correlation coefficient increase in order of 0.61(N) < 0.81(Lt) < 0.87(ρ) < 0.93(Lm) < 0.96(Lmed). The two parameters that have the highest correlations are median length with maximum strength. Through the above correlation analysis between microcrack and strength, the credibility for the results from this study can be enhanced.

• Korean Journal of Organic Agriculture
• /
• v.11 no.1
• /
• pp.79-88
• /
• 2003

Saved labor cost, energy conservation, reduced soil erosion, and increase of emergence rate would be expected from no-tillage cultivation of corn. Few research has been reported on the no-tillage effects for waxy corn hybrid. Five waxy com hybrids were tested under conventional and no-tillage practices to investigate responses of early growth, plant characters, ear characters, fresh yield, and grain yield. Emergence rates under no-tillage were lower than under conventional tillage. Plant heights at early growth stages under no-tillage were higher than those under conventional tillage. Plant height under no-tillage was higher than that under conventional tillage. There were no differences between conventional tillage and no-tillage for ear length, number of kernel rows, number of kernels per row, 100 kernels weight, fresh yield, and grain yield. This result indicates that no-tillage practice might be recommended for practical method for waxy com production. Days to tasseling and silking, plant height, ear height, ear length, and number of kernels per row were correlated with fresh and grain yields.

• Fisheries and Aquatic Sciences
• /
• v.17 no.2
• /
• pp.249-253
• /
• 2014

An 8-week feeding experiment was conducted to determine the influence of dietary distillers dried grain (DDG) on the growth and body composition of juvenile abalone Haliotis discus hannai. Five diets were formulated to contain 0% (DDG0), 15% (DDG15), 30% (DDG30), 45% (DDG45), and 60% (DDG60) DDG, and three replicate groups of abalone (average body weight: $3.6{\pm}0.21$ g) were fed one of the experimental diets at a feeding rate of 5% body weight per day once daily (17:00 h) for 8 weeks. Survival, shell length, and shell width of juvenile abalone were not affected by dietary DDG levels (P > 0.05). Weight gains of juvenile abalone fed DDG15 and DDG30 diets were not different compared to DDG0, but abalone fed DDG45 and DDG60 diets gained less weight than those fed DDG0 (P < 0.05). Soft body weight/body weight ratio of juvenile abalone fed the DDG60 diet was lower than that of those fed the DDG0 diet (P < 0.05), but proximate composition of the soft body was not affected by dietary DDG levels (P > 0.05). The results of this experiment suggest that DDG is a good replacement for wheat flour and soybean meal, and can be used up to 30% in the diet to maintain the growth performance of the juvenile abalone.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.142-149
• /
• 1982

Use efficiency of top-dressed labelled nitrogen(30% at ear formation stage) ranged 23 to 61%(five fields) with no clear difference between varieties. In high yield soil the use efficiency of top-dressed nitrogen was higher and more than 50% of fertilizer nitrogen in plant seemed to be taken up after ear formation, $^{15}N$ excess was greatest in grain indicating that top-dressed nitrogen translocates easily to grain. The difference of $^{15}N$ excess between grain and straw was greater in Tonsil line than in the local indicating faster nitrogen translocation in Tangil. Percent nitrogen derived from top-dressed nitrogen ranged 14 to 27% in aerial part. Two 3-hill plots per treatment could be enough for $^{15}N$ experiment under field condition if there is specific care.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.142-146
• /
• 2010

In order to find out better cultivation practices for environmentally-friendly agriculture, an experiment with four fertilizer levels and one cultivar, 'Boseokchal', and three lines, GG-05-03, GG-05-04, and GG-05-07 was carried out. Those lines had been selected from native green waxy rice over a period of five years (2004~2008). The tillering numbers of both the GG-05-03 and GG-05-04 lines were similar, but GG-05-07 was less than those. Regarding plant height, both GG-05-04 and GG-05-07 were higher than 'Boseokchal', while GG-05-03 was similar to it. There was no marked difference of quantitative character amond the three lines regarding grain weight and grain number of ear. 1000-grain weights of all three lines were slightly light compared to 'Boseokchal' cultivar. Head rice yields of both the GG-05-03 and GG-05-07 lines were less than 'Boseokchal', but the GG-05-04 line was similar to it. Only total lipids of all compositions of brown rice showed a slightly different rate compared to 'Boseokchal'. These results summarize that the GG-05-07 line was shown to be better than both the GG-05-03 and GG-05-04 lines for environmentally-friendly agriculture practices.

• Fisheries and Aquatic Sciences
• /
• v.17 no.1
• /
• pp.85-93
• /
• 2014

A 9-week feeding experiment was designed to test the effects of the dietary inclusion of distillers dried grain (DDG) on the growth performance, body composition, and antioxidant activity of juvenile rockfish Sebastes schlegeli. Five isonitrogenous and isocaloric diets were formulated to contain 0% DDG (DDG0), 7% and 14% DDG from rice (diets DDG-R7 and DDG-R14, respectively), as well as 7% and 14% DDG from rice and wheat flour (diets DDG-RW7 and DDG-RW14, respectively). Three replicate groups of juvenile rockfish averaging $68.0{\pm}0.4g$ were fed one of the diets to apparent satiation twice a day. Survival, weight gain, feed efficiency, and the protein efficiency ratio of fish were not affected by dietary DDG (P > 0.05). Proximate and amino acid compositions of the whole body were not affected by dietary DDG (P > 0.05). Plasma total protein, glucose, total cholesterol, glutamate oxaloacetate transaminase, glutamate pyruvate transaminase, phospholipid, and triglyceride were not affected by dietary DDG (P > 0.05). Radical scavenging activity on 1,1-diphenyl-2-picryl-hydrazyl (DPPH) in the plasma of rockfish fed the DDG-RW14 diet was higher than that of fish fed the DDG0 diet (P < 0.05). Hydroxyl radical scavenging activity in the liver of rockfish fed diets containing DDG was higher than that of fish fed the DDG0 diet (P < 0.05). Alkyl radical scavenging activity in the liver of rockfish fed the DDG-R7 diet was higher than that of fish fed the DDG0 diet (P < 0.05). These results suggest that DDG is a suitable ingredient for the partial replacement of wheat flour and can be used at a rate of up to 14% in the diet without incurring negative effects on the growth performance or body chemical composition of juvenile rockfish.

• Korean Journal of Environmental Agriculture
• /
• v.7 no.2
• /
• pp.92-95
• /
• 1988

A Pot experiment was conducted to study the uptake of $Sr^{90}$ by rice plants in five different types of paddy soils and its distribution in these plants as a function of the age of the rice. The uptake of $Sr^{90}$ by rice plants increased with the growth of the aboveground mass of the plants from the planting period, but $Sr^{90}$ content per unit of dry matter decreased as the organic mass of the plants increased during the vegetative growing period, except for the time of ripening. The content of Ca and $Sr^{90}$ in rice plants was higher in the stem and leaves than in grain parts in general. However, Ca content was decreased in the stem and increased in the grain part with the growth of the rice plant ; but $Sr^{90}$ content was increased in the leaves and decreased in the stem and grain parts.