• Journal of Korean Physical Therapy Science
• /
• v.16 no.1
• /
• pp.31-39
• /
• 2009

Background: Community ambulation has been recently recognized as one of the most essential factors of activities of daily living in patients with post-stroke hemiparesis. This study aimed to compare walking velocity and step number in 5 community situations in patients with post-stroke hemiparesis. Methods: Ten chronic stroke patients volunteered for this study. The main variables analyzed were walking speed and step number, and these were measured in 5 different community situations: a physical therapy room, a parking lot, a bank, a crosswalk, and a hospital lobby. The measurements obtained for walking in the physical therapy room were measured using a 10m walk test and were used as baseline data for comparison with each option. The ambulation distance was set at 300m for the parking lot and the bank and 150m for the crosswalk and hospital lobby. For data analysis, walking speed and step number were standardized with the distance options of each ambulation. Results: Compared to the walking speed in the physical therapy room, those in the other situations, except for the parking lot, were significantly different (p<.05). Moreover, there were significant differences in the speeds between the bank and the parking lot and between the parking lot and the crosswalk (p<.05). Compared to the step number in the physical therapy room, those in all situations except for the crosswalk were significantly different (p<.05). Further, there was a significant difference in the step number between the bank and the crosswalk (p<.05). Conclusion: The walking ability of patients with hemiparesis in real environments within a community could be different from that in a physical therapy room. Therefore, the evaluation of walking should be performed in a variety of community situations.

• Journal of radiological science and technology
• /
• v.42 no.6
• /
• pp.429-434
• /
• 2019

The gonads are directly affected by radiation exposure during radiography of the pelvis, abdomen, and spine. Exposure of the gonads to radiation can cause genetic mutations and can result in the occurrence of malignant tumors. In this study, we created three types of shielding material shapes for shielding of the ovaries, which are the gonads of female during radiography of the pelvis, and comparative evaluations using shadow shielding methods. The source surface distance(SSD) was 100 cm and the field size was 42 cm × 43 cm. The three types of shielding material shapes(type 1, 2 and 3) were assessed and the entrance surface dose in the ovaries were measured. The thickness of the shielding material was expanded from 0.3 mm to 2.4 mm and after five repetitions, radiation values were measured and mean values were calculated. The mean dose were 3.09 mGy for type 1, 3.54 mGy for type 2, and 3.19 mGy for type 3, indicating that the measurements were the lowest for type 1. When an additional filter of 0.2 Cu + 1 Al was used, the dose were 3.72 mGy for type 1, 5.43 mGy for type 2, and 4.05 mGy for type 3, indicating that the measurements were the lowest for type 1. The results show that, even if the shielding material is not thick, in other words, even with a thickness of 2.94 mGy for the SN 3(0.9 mm) of type 1, shielding can be achieved, with a patient dose lower than the diagnostic reference level(3.42 mGy). Additionally, among the three types of shielding material, the type 1 appeared to be the most appropriate shielding material. It is thought that the use of shielding material could reduce the risk factors for stochastic effects or critical effects of ionizing radiation during pelvic or lumbar radiography.

• 한국해양학회지
• /
• v.26 no.2
• /
• pp.155-168
• /
• 1991

In order to study the community structure and distribution patterns of primary producers and their relations to abiotic environmental factors, phytoplankton and environmental parameter were determined during the five times from October, 1989 to July. 1990. 159 taxa of phytoplankton have been identified and the most important species group is diatom which contributes to 70.4% of the total number of species. Ratios of phytoplankton group (neritic species, fresh water species, oceanic species) clustered by habitats were 52%, 18%, 12%, respectively, suggesting study area be the typical estuarine environment which is strongly affected by both fresh water discharge and sea water penetration. Species composition could be governed by the variations of salinity. the standing stocks of primary producer in the study area vary with space and time, showing close correlation with water transparency, and exhibit relatively larger than those of other coastal regions in the Yellow Sea. Spectransies diversity also showed large variation with space and time. According to the cluster analysis, the study area could be divided into two regions (inner part and outer part): in fall and winter, outer area affected by the oceanic water, but in spring and summer, inner estuarine area heavily influenced by fresh water.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.1
• /
• pp.107-118
• /
• 2002

This paper deals with an automated computer-aided process planning and die design system by which designer can determine operation sequences even if they have a little experience in process planning and die design of quasi-axisymmetric cold forging product by cold former working. The approach to the system is based on knowledge-based rules and a process knowledge base consisting of design rules is built. Knowledge for the system is formulated from plasticity theories, empirical results and the empirical knowledge of field experts. Programs for the system have been written in AutoLISP for the AutoCAD using a personal computer. An attempt is made to link programs incorporating a number of expert design rules with the process variables obtained by commercial FEM softwares, DEFORM and ANSYS, to form a useful package. The system is composed of three main modules and five sub-modules. The process planning and die design module considers several factors, such as the complexities of preform geometry, punch and die profiles, specifications of available cold farmer, and the availability of standard parts. As the system using 2D geometry recognition is integrated with the technology of process planning, die design, and CAE analysis, the standardization of die parts for wheel bolt requiring cold forging process is possible. The developed system makes it possible to design and manufacture quasi-axisymmetric cold forging product more efficiently.

• Journal of Fashion Business
• /
• v.24 no.2
• /
• pp.32-43
• /
• 2020

The purpose of this study is to analyze the granny look of the new-tro trend via Alessandro Michele's Gucci collection and to provide a reference standard for future design developments by identifying the representation of the granny look. To analyze the new-tro trend and the granny look, basic concepts were analyzed through aesthetic and art books and the photographic data were collected through Internet sites. A total of 186 fashion images were considered as granny look by five clothing experts. The images were subdivided into silhouettes and items, materials, patterns, and colors to analyze the modeling factors and identify the intrinsic inner meaning based on the theory of Nostalgia. The analysis showed that the silhouette was expressed naturally without exaggeration or shrinkage. The thermosetting materials included fur, velvet, knit and quilted materials, while the colors showed raw and faded shades based on the use of natural colors. The patterns were mostly natural, such as flowers, leaves, and stalks, which were aimed at nature. The inner meaning of the granny look is based on the theory of Nostalgia, primarily because it is an emotional fairy tale and second, it reflected the sessions of nature. Also, it is a reinterpretation of the narrative. In conclusion, the academic and fashion industries need to understand the various emerging trends in accordance with the social and cultural backgrounds to derive a positive benefit.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.23-30
• /
• 2017

PURPOSES : In this paper, the applicability of DEM to a coarse graining method was evaluated by simulating a series of minicone tests for cement paste. METHODS : First, the fundamental physical quantities that are used in a static liquid bridge model were presented with three basic quantities based on the similarity principle and coarse graining method. Then, the scale factors and surface tensions for six different sizes of particles were determined using the relationship between the physical quantities and the basic quantities. Finally, the determined surface tensions and radii were utilized to simulate the fluidal behavior of cement paste under a minicone test condition, and the final shape of the cement paste with reference DEM particle radii was compared with the final shape of the others. RESULTS : The simulations with adjusted surface tensions for five different radii of particles and surface tension showed acceptable agreement with the simulation with regard to the reference size of the particle, although disagreement increases as the sizes of the particle radii increase. It seems reasonable to increase the particle radii by at least 0.196 cm considering the computational time reduction of 162 min. CONCLUSIONS : The coarse graining method based on the similarity principle is applicable for simulating the behavior of fluidal materials when the behavior of the materials can be described by a static liquid bridge model. However, the maximum particle radius should be suggested by considering not only the scale factor but also the relationship of the particle size and number with the radius of the curve of the boundary geometry.

• Geomechanics and Engineering
• /
• v.23 no.1
• /
• pp.51-59
• /
• 2020

In this paper, the WEKA platform was used to mine and analyze measured data of floor failure depth and a prediction system of floor failure depth was developed with Java. Based on the standardization and discretization of 35-set measured data of floor failure depth in China, the grey correlation degree analysis on five factors affecting the floor failure depth was carried out. The correlation order from big to small is: mining depth, working face length, floor failure resistance, mining thickness, dip angle of coal seams. Naive Bayes model, neural network model and decision tree model were used for learning and training, and the accuracy of the confusion matrix, detailed accuracy and node error rate were analyzed. Finally, artificial neural network was concluded to be the optimal model. Based on Java language, a prediction system of floor failure depth was developed. With the easy operation in the system, the prediction from measured data and error analyses were performed for nine sets of data. The results show that the WEKA prediction formula has the smallest relative error and the best prediction effect. Besides, the applicability of WEKA prediction formula was analyzed. The results show that WEKA prediction has a better applicability under the coal seam mining depth of 110 m~550 m, dip angle of coal seams of 0°~15° and working face length of 30 m~135 m.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.10 no.2
• /
• pp.119-123
• /
• 1999

Background and Objectives : Conditions such as muscle atrophy, stretching of strap muscles, and continued craniofacial growth factors have been cited as contributing to the changes observed in the vocal tract structure and function in elderly speakers. The purpose of the present study is to compare F$_1$ and F$_2$ frequency levels in elderly and young adult male and female speakers producing a series of vowels ranging from high-front to low-back placement. Material and Methods : The subjects were two groups of young adults(10 males, 10 females, mean age 21 years old range 19-24 years) and two groups of elderly speakers(10 males, 10 females, mean age 67 years : range 60-84 years). Each subject participated in speech pathologist to be a speaker of unimpared standard Korean. The headphone was positioned 2 cm from the speakers lips. Each speaker sustained the five vowels for 5 s. Formant frequency measures were obtained from an analysis of linear predictive coding in CSL model 4300B(Kay co). Results : Repeated measure AVOVA procedures were completed on the $F_1$ and $F_2$ data for the male and female speakers. $F_2$ formant frequency levels were proven to be significantly lower fir elderly speakers. Conclusions : We presume $F_2$ vocal cavity(from the point of tongue constriction to lip) lengthening in elderly speakers. The research designed to observe dynamic speech production more directly will be needed.

• Horticultural Science & Technology
• /
• v.18 no.4
• /
• pp.499-502
• /
• 2000

Five local cultivars of northern type garlics (Allium sativum L.) and one of southern type were collected, and their growth and developmental characteristics and productivity were investigated to select a well adaptable cultivar in Euiseong region. Local cultivars used in this experiment were 'Euiseong', 'Yeochun', 'Danyang', 'Jungsun', and 'Yongin' as northern type and 'Namdo' as southern one. The growth characteristic of local garlic cultivars were differed with their ecotypes and 'Namdo', a southern type cultivar, showed higher growth rate at the early growing stage than northern types. However, no clear differences were observed among northern types. Incidence of bolting was low in 'Jungsun' and 'Yongin', while high in 'Euiseong' and 'Yeochun'. In the case of incomplete bolting, however, an opposite trend was showed, thus, high in 'Jungsun' and low in 'Euiseong' and 'Yeochun'. Secondary growth was remarkably low in 'Euiseong'. Considering yield factors, 'Yeochun' seemed to be most promising northern type cultivar in Euiseong region, which showed highest bulb weight and largest cloves with high growth rate at the maximum growing stage. 'Danyang', 'Jungsun', and 'Yongin' seemed to have relatively low productivity in Euiseong region.

• Journal of Families and Better Life
• /
• v.22 no.6 s.72
• /
• pp.111-119
• /
• 2004

A rapid increase of the elderly population and changes in the social structure, family type and lifestyle bring us to the moment for considering the various aspects of supporting the elderly including the elderly housing facilities. Traditionally it is considered as a merit for a son to support parents in his own house. Hut recently the elderly increasingly want to live independently without support from their children. To satisfy these needs, new housing facilities for the elderly were developed by private non-profit foundations. A number of outstanding housing facilities for the elderly have been built in the last five years. These facilities show significant progress in housing for the elderly. Unfortunately, there u e no standard design checklists or guidelines for housing for the elderly available in Korea. The housing facilities were built based on foreign design guidelines or architect's experience. This research aims to develop an affordable design checklist that can meet the needs of the Korean elderly lifestyle. This study evaluated the senior residential facilities using Woo's checklist which consolidated the guidelines available here and abroad. As the result of this study, we presented the checklist subject in upper group $25\%, middle group, lower group $25\% distribution and 6, 5, 4, categories in order to importance. When designing the future senior residential facilities, a constraint can be made based on the scope and financial factors of the facility first and the determine how extensive the application of the checklist should be.