• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.867-876
• /
• 1993

This study was investigated to evaluate whether brown rice drying could reduce the rice production cost. Characteristics of brown rice drying was experimentally determined. With brown rice drying, the higher energy efficiency could be obtained. Therefore, this method is effective to cost reduction . However, there are some problems , for example occurrence of fissuring and preservation of rice quality.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.165-167
• /
• 2005

Compared with Inconel 625 (ERNiCrMo-3) weld, Nb-free Alloy 59 (ERNiCrMo-13) weld with 15% Mo showed much higher resistance to hot cracking. Especially in the condition of current 350A and 30CPM of welding speed, no crack was detected at Inconel 625 fillet weld. Furthermore, it was found that the strength of Alloy 59 is sensitive to welding heat input. Up to around 14kJ/cm of heat input, Alloy 59 showed 678N/$mm^{2}$ of ultimate strength and 466N/$mm^{2}$ of yield strength. However, as heat input increased above 14kJ/cm, Alloy 59 weld could not satisfy the weld strength required for European LNG tank.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1996.05a
• /
• pp.141-146
• /
• 1996

ABSTRACT : The aging characteristics of NEPE propellant is studied by HPLC analysis, cube crack test, swelling, and mechanical property test. The depletion of mixed stabilizer NMAI2-NDPA is analysed by Berthelot's law. The stabilizer NMA was completely comsumed after 16 weeks at $70{\circ}$ and after 6 weeks at $80{\circ}$ and the cracks developed in the sample. The aging trend of the propellant was shown hardening phenomena in the range of 20-$60{\circ}$ due to evaporation of energetic plasticizers.

• Korean Journal of Veterinary Research
• /
• v.42 no.2
• /
• pp.153-162
• /
• 2002

For the induction of arthropathy, 5% hydrogen peroxide($H_2O_2$) was injected for 5 weeks into the intraarticular space of the New Zealand white rabbits to damage articular cartilage. Alginic acid of low molecular weight (2%) made from macromolecular alginate treated with enzyme was administered into articular space at the dose of 5 mg/kg twice a week for 3 and 6 weeks using 1 ml syringe and 26 G needle. Saline was injected for the control. Tissues surrounding the articulation were obtained for the measurements of superoxide dismutase(SOD) activity as a major antioxidant enzyme and malondialdehyde (MDA) as a lipid peroxidation level. Histopathologic examination on the surface of articular cartilage was carried out. Data showed that injection of hydrogen peroxide for 5 weeks had led to the induction of free radical damage and of articular cartilage change as confirmed by microscopic observation. The application of hydrogen peroxide caused a gradual increase in the SODs and MDA. These patterns were similar after 3 and 6 weeks of alginate treatment. Furthermore, microscopic examinations revealed that hydrogen peroxide caused flaking, fibrillation, fissuring, denudation, and hypocellularity in the articular surfaces. In conclusion, lipid peroxidation was demonstrated in the articular cartilage by the administration of hydrogen peroxide in the rabbit model. This lipid peroxidation could be caused by oxygen free radicals. The histologic and enzymatic correlations on lipid peroxidation in the articulation have provided a better understanding of arthropathy. It is possible to take advantage of these findings to evaluate effective alginate dosage more efficiently.

• Journal of Korean Foot and Ankle Society
• /
• v.2 no.2
• /
• pp.57-63
• /
• 1998

Stress or march fractures among military personnel, especially recruits, has been appreciated for many years. According to the classical references, the second metatarsal was one of the first sites identified as a focus for march fractures and radiological evidence of fracture appeared as late as several weeks. The purpose of this study was to document the clinical feature of march fractures in Korean infantry soldiers. From 1997 to 1998, at one infantry medical company of OO infantry corps in Korea, 15 (19cases) patients with march fracture were detected among infantry soldiers. There were some different finding in the fracture site and its clinical features from the previous foreign reports. 1. There were pain and local swelling in all cases as clinical manifestation. By physical examination, direct point tenderness on the location of the fractured metatarsal shaft was characteristic. 2. On roentgenographic examination, cortical fissuring or break was seen one week after onset of symptoms and external callus was seen from two weeks or at the least four weeks. Oblique view was more useful than AP view in the diagnosis of march fractures. 3. The third metatarsal was the most frequently involved site(7 cases, 48%). and the second metatarsal was Jess frequent(3 cases, 20%). This difference of frequent site with previous reports might be attributed to the relatively long shaft of the third metatarsal, but should be analyzed in further study. 4. The incidence of the development of march fracture was 1 per 104 infantry soldiers.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.2
• /
• pp.133-139
• /
• 2006

Purpose: To evaluate the results of mosaicplasty and microfracture after surgical treatments for symptomatic osteochondral lesion of talus (OLT) by second-look arthroscopy. Materials and Methods: 7 cases of mosaicplasty and 7 cases of microfracture were reviewed who undertook second-look arthroscopy at 6 months or one year after undertaking mosaicplasty or microfracture for OLT between December 2004 and October 2005. The mean age at first operation was 43.6 years (Range, 20-59) (Mosaicplasty; 43.9 years, Microfracture; 43.4 years). The mean size of cartilage defect was $15.0{\times}7.7\;mm$ in mosaicplasty and $7.1{\times}6.6\;mm$ in microfracture. Clinical outcomes were evaluated by Freiburg ankle score. Cartilage healing state was evaluated by Insall's classification for chondromalasia during second-look arthroscopy. Results: By the Freiburg ankle score, 9 ankles (6 in mosaicplasty, 3 in microfracture) had excellent and 5 (1 in mosaicplasty, 4 in microfracture) had good results at the times of second-look arthroscopy. By Insall's classification, consistency of the osteochondral grafts and congruity between grafts and native cartilage (Grade I) were shown in 9 (6 ankles in mosaicplasty, 3 ankles in microfracture), a fissuring (Grade II) in one ankle of mosaicplasty, a fasciculation (Grade III) in one ankle of microfracture, and partial exposure of subchondral bone (Grade IV) in 3 ankles of microfractures. Conclusion: Mosaicplasty was more excellent in consistency and hardness of cartilage than microfracture. In some cases of microfracture, cartilage healing was incomplete at 6 months postoperatively, so second-look arthroscopy is necessary to identify. If incomplete cartilage healing was shown, additional procedure such as microfracture or mosaicplasty was needed.

• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1173-1179
• /
• 1999

A study was made on crack developments of the nearly building due to rock blasting for road construction at the 623 Common Block near the rear side of the Gamchun Habor. The gelogy of the study area is composed of andesite, which belongs to the Kyungsang System of the Cretaceous Period. For 3 months of blasting events, the vibration velocity data were measured at the site just in front of the K freezing factory. The data were divided into 4 groups according to the period of blasting(i.e, DATA 1, DATA 2, DATA 3 and DATA 4), for deriving K and n values. As a result, DATA 1 shows that K and n were 83.3756 and -0.848, respectively, and then K and n were progressively increased in absolute values for the follow-up groups and the last DATA 4 shows K and n were 2980.4898 and -1.502, respectively. Such differences in K and n values may be due to partly : 1) variations geological characteristics, from the upper rather weathered, fisssuring soft rocks at the earlier stage less weathered and fissuring hard rocks at the later stage of blasting events, and 2) the geometry between the blasting and detecting points.Among the total count of 225 blasting events, the number exceeding the safety limits of 0.5cm/sec was 20(8.9% of the total), the maximum displacement detected at the crack gage was 0.25mm, the level of which is far less to cause the occurrence and development of any cracks to the K factory. Therefore, it was confirmed that there were no damages such as structural failure or safety problem to the building.

• Parasites, Hosts and Diseases
• /
• v.46 no.4
• /
• pp.273-278
• /
• 2008

Mites in the genus Chorioptes cause a mild form of skin disease in both domestic and wild ruminants. In July 2006, dermatitis characterized by alopecia, marked lichenification, accumulation of crust, and fissuring was recognized in 14 out of 200 Holstein dairy cattle raised in the cattle farm of the National Institute of Animal Science in Cheonan, Republic of Korea. Skin lesions were distributed mainly over the tail base, and sacral and perineal regions. Microscopic examinations of skin scraping samples from severely affected areas revealed numerous mites of all developmental stages. Morphologically, pedicels of the mites were short and unjointed. The tarsal suckers occurred on the pedicels of all the legs in the male worm and on the first, second, and fourth pair of legs in the adult female worm. A single long seta at the tarsus of legs III and the length of legs II being about twice as long as legs IV in adult male mites were observed. Arising anterior to the inner-most spatulate seta was a short seta with an average of $26.4{\pm}5.8{\mu}m$ in length. Also, the length of setae #4 on the opisthosomal lobes was relatively short. Based on these observations, the mites were identified as Choriptes texanus. Although the chorioptic mange may not influence the mortality rate in the affected farm, reports indicate that a decline in milk production can be observed. This is the first report of chorioptic infestation in a cattle farm from Korea.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.11
• /
• pp.1377-1382
• /
• 2011

Recently, alternative and novel energy resources have been developed for use in the future because of the current environmental problems and exhaustion of fossil energy resources. Hydrogen energy has many merits, such as its environmental friendliness, easy storage, and easy production, but it also has disadvantages, in that it is highly combustible and explosive. In this study, a test procedure using a simple SP test under highly pressurized hydrogen gas conditions was established. In order to evaluate its applicability, SP tests were carried out using a stainless steel (SUS316L) sample under atmospheric, pressurized helium, and pressurized hydrogen gas conditions. The results under the pressurized hydrogen gas condition showed fissuring and produced a reduction of the elongation in the plastic instability region due to hydrogen embrittlement, showing the effectiveness of the current in-situ SP test.

• Applied Biological Chemistry
• /
• v.24 no.1
• /
• pp.29-39
• /
• 1981

Cooked spaghetti soaked in 10%, 20%, and 40% aqueous glycerine solutions for ten minutes absorbed sufficient glycerine to plasticize that spaghetti during and after subsequent drying. The plasticizing action of the glycerine prevented fissuring(checking) and surface corrugation of the spaghetti at elevated drying temperature and large wet-bulb dry-bulb temperature difference. The drying temperature and the wet-bulb dry-bulb differences up to which such protection was provided as the glycerine soak concentration increased. Despite the reduction in drying rate, the drying time required to produce spaghetti with a water activity of 0.65 (the level normally required for stability) decreased as glycerine content increased. At high frying temperatures glycerine addition increased the extent of browning and shortened the period required to induce detectale browning, but in all instances browning started well after the product $a_w$ reached the 0.65 value required for the completion of drying. Because glycerine addition reduced drying times at any given set of drying conditions and permitted the use of higher drying temperatures, relatively low levels of glycerine addition (e.g. 0.15 kg glycerine/kg dry spagetti) can shorten spagnetti drying times by roughly 80% and perhaps by as much as 93%.