• Economic and Environmental Geology
• /
• v.7 no.4
• /
• pp.157-173
• /
• 1974

The Red Hill deposit of the Dongjom Copper Mine is the most promising deposit of the mine and under intensive exploration at present although there are eight more deposits of vein type. With total 2160m drilling of 9 holes completed and 400m drilling on two holes underway, the nature of the Red Hill deposit has come more clear. The copper content in the whole ore body is meager so far as the exploration done up to present indicates, but there are evidences that mineralization covers all over the granodiorite cupola at the Red Hill area. The petrological work and assay on the samples taken by the writers indicate that granodiorite rocks can be divided into fresh zone and alteration zone. Alteration zone consists of potassic and argillic zones accompanyied by silicification zone on basis of Lowell and Guilbert model Argillic zone has closely related with a mineralization in the Red Hill deposit. It has been cleared that the alteration acompanyied with the mineralization took place not only &long vertical fissures but also in the irregular lateral zone, the nature of which is unknown. Judging from the results of exploration and petrochemical study on the Red Hill deposit which is imbedded in a southern part of the granodiorite cupola, it can be concluded by the writer's opinion that the Red Hill deposit is possibly a porphyry copper deposit, because the shape of the ore body, mineral zoning and paragenesis and wall rock alteration resemble to those of typical porphyry copper deposits. It is the writers' opinion that more exploration work is required so as to evaluate the deposit.

• The Korean Journal of Physiology and Pharmacology
• /
• v.24 no.6
• /
• pp.529-543
• /
• 2020

In contrast to ventricular myocytes, the structural and functional importance of atrial transverse tubules (T-tubules) is not fully understood. Therefore, we investigated the ultrastructure of T-tubules of living rat atrial myocytes in comparison with ventricular myocytes. Nanoscale cell surface imaging by scanning ion conductance microscopy (SICM) was accompanied by confocal imaging of intracellular T-tubule network, and the effect of removal of T-tubules on atrial excitation-contraction coupling (EC-coupling) was observed. By SICM imaging, we classified atrial cell surface into 4 subtypes. About 38% of atrial myocytes had smooth cell surface with no clear T-tubule openings and intracellular T-tubules (smooth-type). In 33% of cells, we found a novel membrane nanostructure running in the direction of cell length and named it 'longitudinal fissures' (LFs-type). Interestingly, T-tubule openings were often found inside the LFs. About 17% of atrial cells resembled ventricular myocytes, but they had smaller T-tubule openings and a lower Z-groove ratio than the ventricle (ventricular-type). The remaining 12% of cells showed a mixed structure of each subtype (mixed-type). The LFs-, ventricular-, and mixed-type had an appreciable amount of reticular form of intracellular T-tubules. Formamide-induced detubulation effectively removed atrial T-tubules, which was confirmed by both confocal images and decreased cell capacitance. However, the LFs remained intact after detubulation. Detubulation reduced action potential duration and L-type Ca²⁺ channel (LTCC) density, and prolonged relaxation time of the myocytes. Taken together, we observed heterogeneity of rat atrial T-tubules and membranous ultrastructure, and the alteration of atrial EC-coupling by disruption of T-tubules.

• Journal of the Korean Geophysical Society
• /
• v.7 no.4
• /
• pp.255-267
• /
• 2004

Analysis of fracture system in a stone quarry mine is a critical importance in assessing the recoverable amounts of building stones as well as in establishing the systematic and efficient development plan. Rock formation comprising vein structure, degree of weathering, and compositon of minerals, is a critical factor of estimating the stone quality. The aim of this study is to provide desirable informations about both fracture pattern and rock formation by using Televiewer and Color-corescanner. Televiewer measurement were conducted at 7 boreholes in the gneiss quarry mine, Hadong, Kyeongsangnamdo province and the corresponding cores were scanned using Color-corescanner at the same place. In Televiewer images, all kinds of fractures were clearly observed and a better discrimination of stone quality can be identified. Meanwhile, the core images with high resolution (max. 20 pixels/mm) provided detailed informations on rock formation such as features of particles and fissures that can be nearly undetected by Televiewer.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.473-480
• /
• 2021

This study was purpose to method that applies for improving the image quality in CT and X-ray scan, especially in the lung region. Also, we researched the parameters of the image before and after applying for Histogram Equalization (HE) such as mean, median values in the histogram. These techniques are mainly used for all type of medical images such as for Chest X-ray, Low-Dose Computed Tomography (CT). These are also used to intensify tiny anatomies like vessels, lung nodules, airways and pulmonary fissures. The proposed techniques consist of two main steps using the MATLAB software (R2021a). First, the technique should apply for the process of normalization for improving the basic image more correctly. In the next, the technique actively rearranges the intensity of the image contrast. Second, the Contrast Limited Adaptive Histogram Equalization (CLAHE) method was used for enhancing small details, textures and local contrast of the image. As a result, this paper shows the modern and improved techniques of HE and some advantages of the technique on the traditional HE. Therefore, this paper concludes that various techniques related to the HE can be helpful for many processes, especially image pre-processing for Machine Learning (ML), Deep Learning (DL).

• Korean Journal of Veterinary Research
• /
• v.59 no.1
• /
• pp.17-24
• /
• 2019

Animal models of osteoarthritis (OA) have played a key role in understanding the etiology of OA and in the development of new therapeutic strategies. Although pigs have an advantage as an animal disease model due to their similarity to humans, there are few studies on the induction of OA in minipigs. Therefore, this study aimed to characterize disease progression of OA in total medial meniscectomy (TMM)-operated skeletally mature minipigs, up to day 180 postoperatively. There were no significant alterations in vital signs or hematological indices throughout the observation period. However, clinical manifestations of OA in the medial femoral condyles of TMM-operated minipigs were progressive, depending on postoperative duration, with respect to osteophytes formation and roughened surfaces on radiological observation, cartilage erosion under macroscopic examination, and severe cartilage defects including fibrillation, vertical fissures, and cartilage denuding on histopathological observation, with the highest score indicating late-stage OA on day 180 and without indicating apparent variation between subjects. In particular, the lateral femoral condyles were also degenerated, possibly due to localization of weight-bearing from both menisci to the lateral meniscus. Therefore, TMM in minipigs is suitable for reproducible induction of degenerative changes in the femorotibial joints that closely resemble late-stage OA, and is suitable for use in further research.

• The Korea Journal of Herbology
• /
• v.32 no.2
• /
• pp.33-40
• /
• 2017

Objectives : This study is aimed at establishing the discriminative criteria for Adenophorae Radix (AT; Sasam), Codonopsis Lanceolatae Radix (CL; Yangyu) and Adenophorae Remotiflori Radix (AR; Jeni). Because of confusable publications and the similitude of herb shape, CL and AR have been used as AT in the markets. Methods : We firstly discriminated and confirmed AT, CL and AR through observing the external morphology of original plants. Then, external-internal morphological features of the medicinal herbs were studied. A stereoscope was used to determine macroscopic features of dried herbal medicines and a microscope was conducted to examine internal features with the samples, which were embedded in paraffin and stained. Results : 1. The original plant of CL was discriminated with the stem shape in comparison with others. AT and AR were classified by the leaf position of original plant. 2. In the macroscopic morphological study of medicinal herbs, CL had lumps, which seem like a wart. Also, AT and AR were different in the density of cross section. 3. In the microscopic morphological study of the medicinal herbs, the phloem, fissures and the arrangement of xylem were selected as discriminative criteria for 3 kinds of herbs. With these contents, we suggested the identification keys, including further details. Conclusions : These results, especially identification keys, will be helpful to distinguish 3 kinds of herbs, referred to as a 'Sasam'. Moreover, macroscopic and microscopic methods used in this article would be applicable tools for the discrimination of other herbs.

• Journal of Oral Medicine and Pain
• /
• v.47 no.3
• /
• pp.109-116
• /
• 2022

Purpose: This study was conducted to analyze the clinical characteristics and distribution of the tongue-related diagnoses in patients with tongue symptoms. Methods: The subjects were patients who visited Chosun University Dental Hospital with tongue symptoms from January 1, 2021, to December 31, 2021. We analyzed 491 patients (139 males and 352 females) with tongue-related diagnostic code names in the Korean Standard Classification of Disease (KCD) in the Electronic Medical Record (Dentopinformation Technology Co., Seoul, Korea). Results: On analyzing the diagnoses of tongue diseases using the KCD, glossopyrosis (44.8%) and painful tongue (15.2%) showed high rates. Of the 491 patients, 139 (28.3%) were males and 352 (71.7%) were females, and the average age was 58.1 years. As for systemic diseases, there were many patients with diseases of the circulatory system (27.0%) and endocrine, nutritional, and metabolic diseases (13.7%). Tongue symptoms were discomfort in 58 patients, pain in 329 patients, paresthesia in 10 patients, burning sensations in 222 patients, dysgeusia in 25 patients, dryness in 110 patients, fissures in 57 patients, and other symptoms in 72 patients. Areas with tongue symptoms were the anterior area in 102 patients, the lateral area in 140 patients, the posterior area in 12 patients, the dorsal area in 140 patients, the ventral area in 42 patients, and which area in 126 patients overall. Patients with burning mouth syndrome and oral candidiasis had significantly more tongue symptoms. Conclusions: Patients with tongue symptoms exhibited a variety of tongue diseases. Tongue symptoms were more common in women over 50 years of age and were frequently seen in patients with burning mouth syndrome and oral candidiasis.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.285-293
• /
• 2023

In this research, we embarked on a meticulous analysis of the challenges inherent in real-world scenarios relating to the durability design standards of engineered concrete structures and the assessment of carbonation durability in concrete guidelines. Our investigation brought to light substantial issues concerning constructability and quality assurance. The genesis of these problems is the exclusive application of prescribed strength to exterior walls, neglecting other elements to facilitate smoother licensing procedures. While this methodology aims to mitigate financial constraints in alignment with enhanced standards, it invariably invites complications. Furthermore, it is imperative to resolve the uncertainty surrounding durability evaluations by establishing a clear and definitive objective. Alongside this, actionable steps must be formulated to forestall the emergence of fissures between the floors of residential buildings, particularly apartment complexes. It is equally essential to tackle issues connected to application by devising a comprehensive management strategy for potential cracking during the phase of maintenance.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.375-385
• /
• 2023

There are many joint fissures distributed in the engineering rock mass. In the process of geological history, the underground rock mass undergoes strong geological processes, and undergoes complex geological processes such as fracture breeding, expansion, recementation, and re-expansion. In this paper, the damage-stick-slip process (DSSP), an analysis model used for rock mass failure slip, was established to examine the master control and time-dependent mechanical properties of the new and primary fractures of a multi-fractured rock mass under the action of stress loading. The experimental system for the recemented multi-fractured rock mass was developed to validate the above theory. First, a rock mass failure test was conducted. Then, the failure stress state was kept constant, and the fractured rock mass was grouted and cemented. A secondary loading was applied until the grouted mass reached the intended strength to investigate the bearing capacity of the recemented multi-fractured rock mass, and an acoustic emission (AE) system was used to monitor AE events and the update of damage energy. The results show that the initial fracture angle and direction had a significant effect on the re-failure process of the cement rock mass; Compared with the monitoring results of the acoustic emission (AE) measurements, the master control surface, key blocks and other control factors in the multi-fractured rock mass were obtained; The triangular shaped block in rock mass plays an important role in the stress and displacement change of multi-fracture rock mass and the long fissure and the fractures with close fracture tip are easier to activate, and the position where the longer fractures intersect with the smaller fractures is easier to generate new fractures. The results are of great significance to a multi-block structure, which affects the safety of underground coal mining.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.137-148
• /
• 2010

The Myoungbong mine located in Boseong-gun, Jellanamdo consists of Au-Ag bearing quartz veins which filled the fissures of Bulguksa granitic rocks of Cretaceous. The tailings obtained from the Myungbong mine were used to investigate the effects of various processes, such as oxidation of primary sulfides and formation(alteration) of secondary and/or tertiary minerals, on arsenic immobilization in tailings. This study was conducted via both mineralogical and chemical methods. Mineralogical methods used included gravity and magnetic separation, ultrasonic cleaning, and instrumental analyses(X-ray diffractometry, energy-dispersive spectroscopy, and electron probe microanalyzer) and aqua regia extraction technique for soils was applied to determine the elemental concentrations in the tailings. Iron (oxy)hydroxides formed as a result of oxidation of tailings were identified as three specific forms. The first form filled in rims and fissures of primary pyrites. The second one precipitated and coated the surfaces of gangue minerals and the final form was altered into yukonites. Initially, large amounts of acid-generating minerals, such as pyrite and arsenopyrite, might make the rapid progress of oxidation reactions, and lots of secondary minerals including iron (oxy)hydroxides and scorodite were formed. The rate of pH decrease in tailings diminished, in addition, as the exposure time of tailings to oxidation environments was prolonged and the acid-generating minerals were depleted. Rather, it is speculated that the pH of tailings increased, as the contribution of pH neutralization reactions by calcite contained in surrounding parental rocks became larger. The stability of secondary minerals, such as scorodite, were deteriorated due to the increase in pH, and finally arsenic might be leached out. Subsequently, calcimn and arsenic ions dissociated from calcites and scorodites were locally concentrated, and yukonite could be grown tertiarily. It is confirmed that this tertiary yukonite which is one of arsenate minerals and contains arsenic in high level plays a crucial role in immobilizing arsenic in tailings. In addition to immobilization of arsenic in yukonites, the results indicate that a huge amount of iron (oxy)hydroxides formed by weathering of pyrite which is one of typical primary minerals in tailings can strongly control arsenic behavior as well. Consequently, this study elucidates that through a sequence of various processes, arsenic which was leached out as a result of weathering of primary minerals, such as arsenopyrite, and/or redissolved from secondary minerals, such as scorodite, might be immobilized by various sorption reactions including adsorption, coprecipiation, and absorption.