• 수산해양기술연구
• /
• 제50권3호
• /
• pp.252-261
• /
• 2014

Marine casualties originated from fishing vessel occupied about 70% of the whole marine casualties in Korea from 2001 to 2010, this ratio was not much changed as it was before. Therefore a pragmatic counterplan to decrease of casualties in fishing vessel is indispensable for reduction of the nationwide marine casualties. But since the casualties occurred by fishing vessel may have a different causes and counterplan according to the operating type of it, in this paper, fishing vessels classified into 12 types by operating method and inspected the causes and counterplan for that. The operating type of fishing vessel occurred the specific casualties more were jig boat in collisions and fire explosion, trap fishing boat, mixed fishing boats and inshore gill netter in collisions, stow netter in machinery damages and capsizing, offshore gill netter in machinery damages, fish carrier in collisions. It must be emphasized that the higher ranked types of vessels, especially jig boat have to take special care to the approaching vessels under way, trap fishing boat to rear look out and mixed fishing boat must keep on safety speed and be taken an education for advance the skill of operating radar as well. For all 12 types of fishing vessel, it is necessary for an operator to make strict precaution on the other vessel under way systematically and keep the regulation for preventing collisions, and for an engineer on watch to make a check the electricity and the engines periodically for reduction the fire explosion and machinery damages.

• 수산해양기술연구
• /
• 제56권2호
• /
• pp.163-171
• /
• 2020

Engaged in trawling in limited fishing grounds with a number of fish schools could cause collisions between fishing vessels. Therefore, providing accurate maneuver information according to the situation could be regarded as essential for improving seafarers safety and fishing efficiency as well as safety of navigation. It is difficult to obtain all maneuver information through sea trial tests only, so a method through empirical formula is necessary. Since most empirical formulas are developed for merchant ship types, especially the characteristics of hull shape parameter like C_bB/L and dC_b/B etc. are clearly different between fishing vessels and merchant ships, this could occur estimation errors. Therefore, in this study, the authors have selected target fishing vessels and merchant ships and analyzed the characteristics of hull shape parameter according to the ship types. Based on this analysis, the empirical formula developed for the merchant ship type has applied to the target fishing vessels; it has verified through the turning motion simulation that the estimation error could be generated. In conclusion, it is necessary to include the characteristics of the hull shape parameter of fishing vessels in the empirical formula in order to apply the empirical formula has developed for merchant ship types to fishing vessel types.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.466-475
• /
• 2010

This study intends to present a direction for the better reforming of fishers'onboard living conditions and proposals for preparing for ratification of the Work in Fishing Convention by means of making a comparison between standards on recent national fishing vessel accommodation facilities and standards on the Work in Fishing Convention and Its Recommendation, 2007, ILO. For the most part of standards on national fishing vessel accommodation facilities are somewhat insufficient to satisfy the provisions in Annex III of the Convention. Considering by items on fishing vessel accommodation facilities, the standards on insect protector, noise and vibration, heating and air conditioning, lighting, persons per sleeping room, recreational facility are not provided in national law. Headroom, separation of accommodation, sleeping room floor area, mattress size, mess room, galley and food storage are partially sufficient for the Convention. In case of sanitary facilities, national standards are not sufficient for the Convention. The other side, facilities related safety of ship and crew such as emergency escape etc., are fully sufficient for the Convention. These insufficiencies caused by different types of fishing vessel depend on originality of fishing method and practices. In the comparison between equivalent tonnage about vessel's length on convention and calculated tonnage of national existing fishing vessel, the difference are 226tons about length 24m and 501tons about length 45m. For that reason, headroom, persons per sleeping room, cabin of sicker and injured, sanitary facilities may decide to use gross tonnage in place of length (L) and the alleviating measure basis of convention. But in case of standards on sanitary facilities which are unsufficient for the Convention, specially in coastal fishing vessel length basis should be adopted with alleviating basis for less than length 24m.

• 수산해양기술연구
• /
• 제43권3호
• /
• pp.176-182
• /
• 2007

Fishing power, which means performance of fishing vessel or catchability of fishing gear, can explain using by fishing power index(FPI) to compare fishery efficiency among uniformity types of fishery that work during the fixed period in specific fishing ground. This research analyzed on their fishing power and catchability using comparing each sampled vessels of coastal trap fishery for common octopus. The results showed that they were no difference in amount of used trap and immersed time etc. in CPUE among sampled vessels, and had no correlation of catch production due to vessel's tonnage. Most vessel's FPI estimates but 3 vessels were higher than the averaged, and showed similar fishing power in general. And then, CPUE and FPI showed that 4 to 5 tonnage vessels would be superior to another, 4 tonnage vessels had also good catchability. Therefore, we estimated that 4 tonnage vessels had the most efficiency work for coastal trap fishery for common octopus.

• 해양환경안전학회지
• /
• 제30권2호
• /
• pp.176-183
• /
• 2024

주로 소형어선에서 발생하고 있는 연근해에서의 전복사고를 예방하기 위해 소형어선의 복원성 평가는 중요하다. 하지만 국내 「어선법」에서는 24m 미만의 소형어선에 대한 복원성 평가 규정이 미비한 실정이다. 2022년 해양수산부에서 안전복지를 강화하여 고시한 표준어선형에 관한 안전성 기준에 따르면, 표준어선형을 따르는 선박은 길이와 무관하게 안전성 기준에 따른 복원성을 가져야 한다. 이에 본 연구에서는 상기 기준을 활용하여 24m 미만에 해당하는 4.99톤급 어선에 대한 복원성 평가를 수행하고 해당 기준으로 복원성을 평가하는 것이 적합한지 검토하는 것을 목표로 한다. 또한 다양한 상부구조물을 가지는 4.99톤급 소형어선에 대해서도 해당 기준이 유효한지 검토를 수행한다. 이를 위해 어선의 초기횡메타센타높이(GM)를 이용한 초기복원성과 한계경사각에서의 복원정(GZ_α)을 평가하였다. 그리고 현재 표준어선형의 소형어선에서 주로 활용되는 상부구조물의 형태를 활용하여 대상선과 동일한 하부 선형과 제원을 가지는 소형어선 6종을 추가로 선정하여 상부구조물 변화에 따른 복원성 변화도 검토하였다. 4.99톤급의 표준어선형을 대상으로 한 연구 결과, 안전복지를 강화한 표준어선형에 대한 안전성 기준은 4.99톤급 표준어선형의 어선에도 적용 가능하며, 상부구조물에 변화에 따른 복원성 변화는 크지 않은 것으로 확인되었다.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.232-240
• /
• 2016

Marine casualties originated from fishing vessels occupied about 71.2% of the whole marine casualties in Korea from 2008 to 2014, which has not changed much for a long time. Therefore, a pragmatic counterplan to decrease in casualties in fishing vessel is indispensable for reduction of marine casualties in Korea. Since the casualties occurred by fishing vessels may incline to a specific type of casualties according to the difference in the operating type; in this paper, 11 fishing types which occurred casualties frequently in numbers and occupied ratio were selected. Since the most frequent occurring casualties in fishing vessels were from collisions and fire explosion in statistics from KMST (2008~2014), the study focused on them. The collision is given a great deal of weight in all the casualties mostly due to the negligence of duty regardless of the job types. Gill netter, trap fishing boat, jig boat, multiple fishing boat and stow netter have their own specific causes of casualties in collision according to the operating types. The cause of fire explosion was mainly due to poor inspection and maintenance the electric cord. For this reason, it may be necessary for an operator to make strict precaution on the other vessels under way systematically, keep the regulation for preventing collisions, and for an engineer on watch to make a check the electricity periodically to reduce the fire explosion.

• 한국해양공학회지
• /
• 제37권1호
• /
• pp.1-7
• /
• 2023

The motion of small fishing vessels is significantly affected by small waves, leading to accidents, such as capsizing or sinking. This paper presents the results of two types of basin tests. The first test analyzed the characteristics of roll and pitch motions among regular waves with the same wave steepness using the drifting state of three (3G/T, 7G/T, 10G/T) small fishing vessels. The second test analyzed the motion characteristics of the 7G/T fishing vessel under different wave steepness. The first test showed that heave and roll motions are significant in the beam sea, while pitch motion is significant in the bow and stern seas. The second test shows that wave steepness has a linear relationship with roll and pitch motions in the bow and stern seas.

• 대한원격탐사학회지
• /
• 제38권1호
• /
• pp.73-82
• /
• 2022

Marine fisheries resources face major anthropogenic threat from unregulated fishing activities; thus require precise detection for protection through marine surveillance. Korea developed an efficient land-based small fishing vessel monitoring system using real-time V-Pass data. However, those data directly do not provide information on fishing activities, thus further efforts are necessary to differentiate their activity status. In Korea, especially in Busan, longlining is practiced by many small fishing vessels to catch several types of fishes that need to be identified for proper monitoring. Therefore, in this study we have improved the existing fishing status classification method by applying Hidden Markov Model (HMM) on V-Pass data in order to further classify their fishing status into three groups, viz. non-fishing, longlining and other types of fishing. Data from 206 fishing vessels at Busan on 05 February, 2021 were used for this purpose. Two tiered HMM was applied that first differentiates non-fishing status from the fishing status, and finally classifies that fishing status into longlining and other types of fishing. Data from 193 and 13 ships were used as training and test datasets, respectively. Using this model 90.45% accuracy in classifying into fishing and non-fishing status and 88.23% overall accuracy in classifying all into three types of fishing statuses were achieved. Thus, this method is recommended for monitoring the activities of small fishing vessels equipped with V-Pass, especially for detecting longlining.

• 한국수산과학회지
• /
• 제41권6호
• /
• pp.485-492
• /
• 2008

To propose proper vessel characteristics for sustainable fisheries in Korean waters, we analyzed the fishing capacity, scale efficiency and utilization of large pair-trawl vessels based on the database of catch, effort and vessel characteristics (gross tonnage and engine power) in 1990 by applying data envelopment analysis (DEA). The input factors were gross tonnage, horse power and days operated; whereas the output factor was expected catch by vessel characteristics. The optimal vessel types, selected based on the input-oriented technical efficiency and gross tonnages, was 100 GT with engine power <600 HP. The output-oriented unbiased estimate of capacity utilization (CD) decreased with increasing vessel tonnage. For the same tonnage vessels, the CD decreased with increasing engine power.

• 수산해양기술연구
• /
• 제50권2호
• /
• pp.147-153
• /
• 2014

The purpose of this paper is to examine the roll damping characteristics by bilge keels on the fishing vessel. Unlike other degree of freedom motions, roll motion is highly nonlinear. However the quantitative evaluation of roll damping combined with waves is very important for the fishing vessel. To reduce roll motion, roll motion stabilizers such as a bilge keel is used due to easy made and cheap cost rather than anti-rolling tank and fin-stabilizer. Authors paid attention to the shape of bilge keel and waves to grasp the roll damping for the fishing vessel and studied about the difference of tendencies of roll angle following the shapes of bilge keel. The model ship was the offshore large purse seiner and four types of bilge keel were used. The data from the experiments were provided and analyzed to investigate the rolling characteristics of the model ship being affected by the wave height, wave period and bilge keel shape. The results of the study showed that three types of the bilge keel have little effective, but only one has an effect on the roll damping. So bilge keel shape and its attachment method need to be a future study for the practical use in fishing vessel.