• 한국수산과학회지
• /
• 제30권6호
• /
• pp.929-935
• /
• 1997

The total energy of fish movement and the maximum burst swimming speed were estimated and formulated in accordance with body length and water temperature for several species in fisheries by empirical methods and also by using published results. Under the assumption of swimming energy reserve of a fish at the initial rest state, the swimming endurance of fish with different body lengths, swimming speeds and angular velocity was calculated using the relevant equations under similar conditions in tank experiments as well as natural conditions in field. Relative swimming energy efficiency or the transition swimming speed between red and white muscle for energy consumption was represented as a trigonometric function of swimming speed ratio. Therefore, this model does closely approach the actual swimming abilities and their limits especially in relation to the fishing gear operation and allow for the greater vitality of the wild fish in the fields.

• 수산해양교육연구
• /
• 제21권1호
• /
• pp.68-77
• /
• 2009

In this study it will be discussed how to solve the problem of discomfort from rolling motion on the small fishing boats. Up to now, the equipments of reducing rolling system can be examined by various case, but difficult to apply small vessel by function, space and costly establishment. A way of improving the feeling of getting on a boat through the equipped sail at stern edge of bulwark top was researched and developed. The author has tested the sailing performance of the experimental skiff boat, from the signals obtained by the inclinometer in irregular waves and compared with the results got in sail on and off mode operation for 10 minutes duration at the conditions of stop and underway. These data has been analyzed in the application statistical methods. Eventually we summarize the analyzed results obtained from the vessel while stationary and underway for two cases, the vessel with a sail and the vessel without a sail. The field test was done in Jeju outer harbor. The ratio of the motion responses at resonance for the sail with and without cases indicate that under given conditions the motion was reduced by the efficiency of diminution is 4.726%, 2.792% in the stopping and 11.663%, 3.282% in the underway and mean rolling periods are 2.158, 2.142, 2.421, 2.412sec. and 1.968, 1.963, 2.089, 2.051sec. respectively. Consequently the efficiency of diminution was higher when the ship is underway and rolling periods got longer in the equipped sail.

• 수산해양기술연구
• /
• 제54권1호
• /
• pp.12-24
• /
• 2018

This study was conducted in order to improve opening efficiency of the miniaturized large-scale net for anchovy boat seine gear to reduce the fleet size. Field experiments were performed to observe geometry of nets by catcher boats. When the distances between the two ships were 150, 300 and 450 m, and the speeds of towing nets were 0.6, 0.9, and 1.2 k't, respectively. The vertical opening and actual opening of each part of the miniaturized large-scale net was as follows: the front part of the wing net, 8.7-13.3 m, 51-78%; the middle part of the wing net, 28.1-34.2 m, 55-67%; the entrance of the inside wing net, 31.3-38.5 m, 60-73%; the square and bosom, 22.7-29.6 m, 47-62%; the entrance of the body net, 20.9-26.4 m, 42-52%; the entrance of the bag net, 17.2-21 m, 72-89%; the flapper, 13.2-15.3 m, 78-83%; and the end of the bag net, 13.2-15.7 m, 72-75%. By connecting the net pendants with the front part of the wing net, the opening of the front part of the wing net was significantly improved compared to the traditional gear, which ensured both the wing net and the inside wing net with a normal net height. This, in turn, increased the efficiency of herding. The height of the body and bag nets was also higher than that of the tradition gear. In particular, the body net attached to the gear significantly improved the pocket shape of the gear and reduced the number of fish that were caught and escaped from the bag net, which increased the rate of fishing. The tension of towing nets was measured approximately between 2,958 and 7,110 kg, which indicates that the fleet can tow nets with 350 ps, the standard engine horse power. The fishing operation time was shortened compared with of the existent net, and the large-scale buoy attachment operation was also possible to operate the ship without fish detecting boat.

• 수산해양기술연구
• /
• 제39권4호
• /
• pp.326-336
• /
• 2003

본 연구는 현용 전어 선망 어구$.$어법에 대한 실태조사에서 파악된 문제점과 조업시 어구의 수중 형상 및 어구에 대한 어군의 행동을 조사$.$분석한 전보의 결과를 바탕으로 어구 개발에 대한 방향을 설정한 후 고려되는 몇 가지 형태의 어구를 제시하고 이들 어구에 대한 모형 실험을 실시하였는데, 그 결과를 요약하면 다음과 같다. 1. 현용 어구와 현용 어구의 75% 규모로 축소 (뜸줄 길이 기준)한 어구에 짐줄을 채택하였을 경우, 짐줄이 완전히 체결되기도 전에 발줄이 수면으로 부상하거나 수심 2∼3m 에서 짐줄이 체결되어 현용 어구구조에는 짐줄을 사용하는 것은 오히려 어획 성능을 저하시키는 것으로 나타났다. 2. 뜸줄과 발줄의 길이는 현용 어구의 60% 규모로 하고 그물의 양쪽 옆 부위를 최소 전개 깊이인 20m로 고정한 채 중앙부로 갈수록 깊이를 점차 증대시킨 어구 중 중앙부 깊이가 50m인 어구는 짐줄이 수심 20∼23m 이상에서 체결되고, 중앙부 깊이가 40m 와 30m인 어구는 체결 수심이 7∼15m 사이로 나타나 모든 어구에서 어군을 차단하는데 충분한 깊이를 보이지만 조업 어장의 수심과 조류 등을 고려하였을 경우 현장에 적용하기에는 중앙부 깊이가 40m 와 30m인 어구가 더 유리하다고 판단된다.

• 수산해양기술연구
• /
• 제59권3호
• /
• pp.206-214
• /
• 2023

Fish school monitoring technology is utilized for various purposes, such as boat fishing and resource surveys. With advancements in information and communication technology, this technology has expanded its application to remote areas. Its significance has grown in fishing sites, particularly for improving the efficiency and cost-effectiveness of set-net fishing. Set-net fishing gears are not limited to coastal areas, but are also installed in inland and remote sea regions. Consequently, fishermen require technology that allows them to quickly transmit information about approaching fish schools and enables them to perform long-term monitoring. The development of remote monitoring technology for set-net fish schools must consider crucial design factors such as communication range, transmission speed, power consumption of information modules, and operational expenses. In this study, we developed a low-power remote monitoring module for set-net fish school based on WCDMA. The module was specifically designed to minimize power consumption, allowing for communication over long distances and extended operation times in set-net fishing applications. Furthermore, we developed a web server software application that enables remote access to fish schools and provides real-time weather information. The performance of the developed module was evaluated through set-net fishing site application and experiments with moving ships on the sea. The experimental results demonstrated that the remote monitoring system, consisting of the developed low-power remote monitoring module for set-net fish school based on WCDMA and a fish finder, had an average power consumption of 4.6 W, a maximum communication range of 22.84 km, and a data transmission and reception rate of 98.79%. The maximum fish school information transmission and reception rate was 97.26%

• 한국수산과학회지
• /
• 제42권6호
• /
• pp.711-720
• /
• 2009

Characteristics of spectral irradiance based on the distance from the light source, which combined metal halide lamp and high-luminance light-emitting diode (LED) light, were studied to investigate a suitable operating method for fishing lamps of the next generation. A 380-780 nm wavelength radiation was superior when using 1 W electrical power in the order of metal halide lamp, blue LED, white LED, and combined LED lights. The wavelengths at which the irradiance was at a maximum were fixed to 581 nm for the light source, which was combined for each ratio. If the irradiance characteristics at 300-1100 nm wavelengths were set as 100%, the irradiance rates at 400-599 nm were 100%, 72.7%, 88.9%, and 69.5% for the blue, white, combined LED lights, and metal halide lamp, respectively. This indicated that the color rendering of the LED lights was dependent on the metal halide lamp light source. When the horizontal profiles (450-550 nm wavelength) of irradiances were compared to a different type of light source in the ratio white LED: combined LED lights: blue LED: metal halide lamp, the irradiated area of more than $0.01\;{\mu}mol/s/m^2/nm$ was in the ratio 1.0 : 1.3 : 1.7 : 37.3, respectively. Based on the radiation characteristics and irradiance according to the distance from the light source, LED lights have an estimated economic efficiency if used before and after operation of a metal halide lamp.

• 수산해양기술연구
• /
• 제23권4호
• /
• pp.157-162
• /
• 1987

장어통발의 P.P깔때기 살과 대나무 깔때기 살의 탄성을 측정하고 측면 구멍을 막은 통발과 원형의 유수저항, 침강시간 및 미끼의 냄새확산 등을 관찰한 다음 해상어획 시험을 행한 결과는 다음과 같다. 1. P.P 깔때기 살의 탄성은 대나무 살보다 훨씬 작고, 하중이 증가할수록 탄성회복도는 감소하였다. 2. 플라스틱 장어통발의 유수저항 R(kg)는 유속 V(m/sec)에 따라 다음 관계식으로 나타낼 수 있다. R=0.36V 상(2.01) 3. 장어통발의 침강시간은 측면 구멍을 막은 경우 수면상에서의 완전 침수까지 1~2초 정도 원형보다 지연되나 그 후의 침강속도는 거의 차이가 없었다. 4. 통발 내의 미끼 수용액은 측면 구멍을 많이 막을수록 원형보다 입구쪽으로 집중되어 확산되었다. 5. 측면 구멍을 일부 막은 통발과 원형을 가지고 어획시험을 한 결과 통발당 평균 어획미수나 평균어획량의 어획성능에 있어서 뻘로 된 어장에서는 차이가 없는 것 같다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 제 23회 정기총회 및 추계학술발표회
• /
• pp.11-25
• /
• 1998

Many Countries have made efforts to assist ships navigate accurately , safely and expeditiously for the safety control against increasing marine traffic , in their coastal waters. However, they are exposed in spite of these efforts,to risks of casulaties and marine polluation caused by traffic congestion when ships are navigating through waterways approaches to ports or harbors and in narrow fairways. Therefore, efficient control of VTS in Port is necessary nowadays to provide ships with necessary service , which interacts with shipping and organize the flow of traffic so as to maximize the efficiency of the port or harbor while minimizing the risk of accident and environmental pollution. Even though the navigation condition of ships is very inferior compared to other ports in Korea, such as the big difference between the ebb and flood tide, the frequent fog, the narrow fairway , the density of navigation traffic in Inchon Port is high and transportation quantity of dangerous cargoe increases gradually. In cosideration of the characteristics of natural circumstance and traffic circumstance the VTS established newly in Inchon port have to operate efficiently. The purpose of this study is to help efficient operation of VTS in Inchon port by accomplishing both the literature research and questionnaire survey. Questionnaire survey was read to the VTS personnel in Inchon Port and customer familiar to Inchon Port such as ship navigators, pilots, shipping companies and so on. Most of ship navigators who occupy half of the respondents are Korean Officer who had responded while they were calling at Inchon port. The conclusions and recommendations includes ; First, the service area should be extended over Designated area to provide the vessel with navigational assistance service regarding the information of traffic congestion area, fishing boat and small ship's activities. Second, the types of information service to be offered are ship's movement and weather condition inthe vicinity of the port and state of fairway in the approaching channel to thte fairway. Third, VTS personnel should be upgraded by the on-the-job training and continuous simulation training as well as supplement of the qualified personnel for VTS operation. Fourth , the Harbor Master System to be introduced for safe navigation and efficient port operation.

• 수산해양기술연구
• /
• 제27권4호
• /
• pp.247-254
• /
• 1991

1982~88년 사이 한국건착망 어업의 망선 48척의 어황일보에 의한 조업해구, 어종별 어획량의 자료를 이용하여 5개 해역별로 어획량의 특성을 분석하였다. 이들 해역중 제주도 연안해역(CC)은 양망회수와 어획량은 많으나 양망당어획량이 타해역보다 적으므로, 조업중 어구의 형상에 대해 계측한 자료를 이용하여 저층류에 의한 망형변화에 대해 분석한 결과를 요약하면 다음과 같다. 1. 건착망의 평균 CPUE는 31.6톤인데 음 10~4월은 평균보다 높고, 음 5~9월은 낮았다. 2. 건착망 어장 5개 해역중 CC해역은 양망회수비 42.4%로서 가장 높고 CPUE는 25.7톤으로 낮았으며, 각 해역별 CPUE는 1%의 유의수준에서 차가 인정되었다. 3. 고등어 CPUE의 계절변동지수는 음 11~1월에 평균 136.3%였고, 음 5~10월에 평균 63.7%였다. 4. 저층류에 의한 역조시 선망권의 직경은 가장 짧았고, 이때 납줄에 의한 포위면적은 더욱 좁아지며 어군의 포위효율은 낮아졌다. 5. 저층류에 의한 납줄의 형상은, 순조의 경우 유향으로 장원형이 되었고, 역조의 경우 유향과 직교되는 방향으로 장원형이 되면서 포위면적이 급히 축소되었으며, 망의 변형은 역조의 경우 가장 심하였다.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.271-282
• /
• 2021

This study aims to understand the opening efficiency of the finless porpoise escape guide net by the type of extension net that is the part to which the escape guide net is attached in stow net. To this end, extension nets were manufactured in full size and the net mouth area and towing tension were investigated according to the towing speed (0.2, 0.4, 0.6 and 0.8 m/s) and the type of extension net (25 mm net and raschel net) in the water tank. As a result, the net mouth area of the guide net was larger when the raschel net was used for the extension net than when the 25 mm net was used under all towing speeds. In addition, regardless of the type of extension net, the net mouth area reached about 80% of the maximum value at a towing speed of 0.4 m/s. In the field, fishing operation of stow net is performed only when the current speed is above 0.4 m/s. Therefore, the speed of 0.4 m/s was confirmed as a meaningful value to determine whether it is possible to operate. As a result of analyzing the relationship between the net mouth area of the guide net and the towing tension, it was confirmed that the difference in the net mouth area of the guide net according to the type of the extension net was due to the difference in the solidity ratio.