• Title/Summary/Keyword: First hole

Search Result 443, Processing Time 0.028 seconds

Approximate Nonrandom Two-Fluid Lattice-Hole Theory. General Derivation and Description of Pure Fluids

  • 유기풍;신훈용;이철수
    • Bulletin of the Korean Chemical Society
    • /
    • v.18 no.9
    • /
    • pp.965-972
    • /
    • 1997
  • An approximate molecular theory of classical fluids based on the nonrandom lattice statistical-mechanical theory is presented. To obtain configurational Helmholtz free energy and equation of state (EOS), the lattice-hole theory of the Guggenheim combinatorics is approximated by introducing the nonrandom two-fluid theory. The approximate nature in the derivation makes the model possible to unify the classical lattice-hole theory and to describe correctly the configurational properties of real fluids including macromolecules. The theory requires only two molecular parameters for a pure fluid. Results obtained to date have demonstrated that the model correlates quantitatively the first- and second-order thermodynamic properties of real fluids. The basic simplicity of the model can readily be generalized to multicomponent systems. The model is especially relevant to (multi) phase equilibria of systems containing molecularly complex species.

The Surgical Treatment of Three Young Chronic Subdural Hematoma Patients with Different Causes

  • Hou, Kun;Li, Chen G.;Zhang, Yang;Zhu, Bo X.
    • Journal of Korean Neurosurgical Society
    • /
    • v.55 no.4
    • /
    • pp.218-221
    • /
    • 2014
  • Chronic subdural hematoma (CSDH), which rarely happens in the young, is thought to be a disease of the elderly. Whereas unspecific symptoms and insidious onset in juveniles and young adults, as a result of its relative low morbidity, CSDH is usually neglected even undertreated in the young. Through the three cases and review of the current literature on this subject, we tried to illustrate the clinical and etiopathological characteristics of this entity and find out the most appropriate treatment strategy. We report three young CSDH patients with different but similar symptoms. The present histories, tests and examinations revealed different predisposing factors accounting for the genesis of CSDH. Their preoperative symptoms were all resolved with burr hole and drainage operation. Juveniles and young adults suffering from CSDH differ from that of their elderly counterparts in their clinical and etiopathological characteristics. Although trauma is the most important risk factor in young and old CSDH patients, some other predisposing factors may exist. Burr hole and drainage surgery could resolve the problem most of the time. But further tests and examinations even specific management should be made in some cases.

How Innovative is a Firm in a Structural Hole Position?

  • Minjung KIM
    • The Journal of Industrial Distribution & Business
    • /
    • v.15 no.8
    • /
    • pp.1-12
    • /
    • 2024
  • Purpose: Marketing networks are essential for firms to gain new information and resources, yet their effect on innovation performance under uncertainty remains unclear. This study aims to elucidate the effects of technological and demand variability on the innovation performance of first-tier suppliers, considering different levels of structural holes. It particularly explores how structural holes moderate the relationship between uncertain factors and innovation performance. Research design, data and methodology: To assess the hypotheses, a survey was conducted with the first-tier suppliers. The survey targeted internal networks and the relationships between manufacturers, suppliers, and subsuppliers. Structural equation modeling was employed to validate the hypotheses using measures from previous research. Results: The findings indicate that the impact of technological uncertainty and demand variability on innovation performance varies based on the extent of structural holes in the network. Conclusions: This study provides both theoretical and practical insights for distribution channels, highlighting the competitive advantage of interfirm networks in uncertain conditions. However, the focus on the engineering industry may limit the generalizability of the findings. Future research should explore a broader range of industries to improve result applicability.

Curative transvenous embolization for congenital multi-hole pial arteriovenous fistula

  • Lane Fry;Aaron Brake;Catherine Lei;Frank A. De Stefano;Adip G. Bhargav;Jeremy Peterson;Koji Ebersole
    • Journal of Cerebrovascular and Endovascular Neurosurgery
    • /
    • v.26 no.1
    • /
    • pp.85-96
    • /
    • 2024
  • Objective: Congenital intracranial pial arteriovenous fistula (PAVF) is a rare cerebral vascular pathology characterized by a direct shunt between one or more pial feeding arteries and a cortical draining vein. Transarterial endovascular embolization (TAE) is widely considered first line therapy. Curative TAE may not be achievable in the multi-hole variant due to the potential to harbor innumerable small feeding arteries. Transvenous embolization (TVE) may be considered to target the final common outlet of the lesion. Here, we present a series of four patients with complex multi-hole congenital PAVF treated with staged TAE followed by TVE. Methods: A retrospective review was conducted on patients who underwent treatment for congenital, multi-hole PAVFs treated by a combined TAE/TVE approach at our institution since 2013. Results: We identified four patients with multi-hole PAVF treated by a combined TAE/TVE. Median age was 5.2 (0-14.7) years. Median follow-up of 8 (1-15) months by catheter angiography and 38 (23-53) months by MRI/MRA was obtained. TVE achieved complete occlusion in three patients that proved durable on radiographic follow-up and demonstrated excellent clinical outcomes with a modified Rankin Score (mRS) of 0 or 1. Complete occlusion of the draining vein was not achieved by TVE in one case. This patient is graded as pediatric mRS=5 three years post-procedure. Conclusions: With thorough technical considerations, our series indicates that TVE of multi-hole PAVF that are refractory to TAE is feasible and effective in arresting the consequences of chronic, high-flow AV shunting produced by this pathology.

Shot Hole of Peach and Japanese Plum Caused by Xanthomonas campestris pv. Pruni and Erwinia nigriflens in Korea (Xanthomonascampestris pv. pruni와 Erwinia nigrifluens에 의한 복숭아 및 자두의 세균성구멍병)

  • 최재을;이은정;박영섭
    • Research in Plant Disease
    • /
    • v.6 no.1
    • /
    • pp.10-14
    • /
    • 2000
  • In 1998, bacterial shot hole of peach (Prunus persica) and Japanese plum(Prunus salicina) was found in Naju and Milyang. Five isolates of bacteria isolates from the diseased leaves and fruits of peach and Japanese plum were classified into genus Erwinia and Xanthomonas on diagnostic characteristics. Of five isolates, two were identified as X. campestris pv. pruni, three as E. nigrifluens. E.nigrifluens is the first description of bacteria which causes the disease on peach and Japanese plum in Korea. the symptoms caused by E. nigrifluens were hardly distinguished from those caused by X. campestris pv. pruni. In addition, it was observed that two pathogenic bacteria were isolated from most of naturally infected plants at the same time. from the reason mentioned above, we proposed to use a single common name \"bacterial shot hole of peach and Japanese plum\" for the both bacterial diseases, hereafter.

  • PDF

Surface Crack Removal by EDM for Inside Cooling Hole of Gas Turbine Blade (EDM을 이용한 가스터빈 회전익의 냉각공기 유로내벽 표면균열 제거)

  • 강신호;김대은
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.20 no.8
    • /
    • pp.54-61
    • /
    • 2003
  • The first stage rotating blade of industrial gas turbine is one of the components that is normally run in exposed state at the highest temperature of the combustion gas stream. For this reason superior materials and advanced cooling technology are required to allow higher heat resisting characteristics of the component. The 1st stage blade of a selected commercial gas turbine blade made of directionally solidified Ni-based superalloy has a row of cooling holes on its trailing edge. In most cases, minor cracks have been found at some of the root cooling holes after one cycle operation (24,000 hrs) or even shorter operation time because of the high temperature gradient and the frequently alternating thermal stress. In the repair process, unfortunately, it is usually very difficult to get rid of the damage due to the fact that cracks are initiated at the root cooling hole and propagated deep into the hole. In this study, the feasibility of removing the sidewall cracks in the hole by utilizing EDM drilling has been investigated. Also the criteria of surface integrity for EDM drilling were established to achieve high quality repair as well as machining accuracy.

Seismic Traveltime Tomography in Inhomogeneous Anisotropic Media (불균질 이방성 매질에서의 탄성파 주시 토모그래피)

  • Jeong, Chang-Ho;Suh, Jung-Hee
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 2007.06a
    • /
    • pp.209-214
    • /
    • 2007
  • In Korean geology that crystalline rock is dominant, the properties of subsurface including the anisotropy are distributed complexly and changed abruptly. Because of such geological environments, cross-hole seismic traveltime tomography is widely used to obtain the high resolution image of the subsurface for the engineering purposes in the geotechnical sites. However, because the cross-hole tomography has a wide propagation angle coverage relatively, its data tend to include the seismic velocity anisotropy comparing with the surface seismic methods. It can cause the misinterpretation that the cross-hole seismic data including the anisotropic effects are analyzed and treated with the general processing techniques assuming the isotropy. Therefore, we need to consider the seismic anisotropy in cross-hole seismic traveltime tomography. The seismic anisotropic tomography algorithm, which is developed for evaluation of the velocity anisotropy, includes several inversion schemes in order to make the inversion process stable and robust. First of all, the set of the inversion parameters is limited to one slowness, two ratios of slowness and one direction of the anisotropy symmetric axis. The ranges of the inversion parameters are localized by the pseudo-beta transform to obtain the reasonable inversion results and the inversion constraints are controlled efficiently by ACB(Active Constraint Balancing) method. Especially, the inversion using the Fresnel volume is applied to the anisotropic tomography and it can make the anisotropic tomography more stable than ray tomography as it widens the propagation angle coverage.

  • PDF

Parametric Blending of Hole Patches Based on Shape Difference (형상 차이 기반 홀 패치의 파라미트릭 블렌딩 기법)

  • Park, Jung-Ho;Park, Sanghun;Yoon, Seung-Hyun
    • Journal of the Korea Computer Graphics Society
    • /
    • v.26 no.3
    • /
    • pp.39-48
    • /
    • 2020
  • In this paper, we propose a new technique for filling holes in triangular mesh. First, arbitrary shaped holes are detected. Second, source and target hole patches are generated through triangulation, refinement, fairing, and smoothing. Finally, the shape difference between the two patches is analyzed and a patch with enhanced features is obtained through blending between patches. The effectiveness of the proposed technique is demonstrated by applying the hole filling technique to the triangular mesh model with various shaped holes.

Hole quality assessment of drilled CFRP and CFRP-Ti stacks holes using polycrystalline diamond (PCD) tools

  • Kim, Dave;Beal, Aaron;Kang, Kiweon;Kim, Sang-Young
    • Carbon letters
    • /
    • v.23
    • /
    • pp.1-8
    • /
    • 2017
  • Polycrystalline diamond (PCD) tools possessing high hardness and abrasive wear resistance are particularly suited for drilling of carbon fiber reinforced plastic (CFRP) composites, where tool life and consistent hole quality are important. While PCD presents superior performance when drilling CFRP, it is unclear how it performs when drilling multi-stack materials such as CFRP-titanium (Ti) stacks. This comparative study aims to investigate drilling of a Ti plate stacked on a CFRP panel when using PCD tools. The first sequence of the drilling experiments was to drill 20 holes in CFRP only. CFRP-Ti stacks were then drilled for the next 20 holes with the same drill bit. CFRP holes and CFRP-Ti stack holes were evaluated in terms of machined hole quality. The main tool wear mechanism of PCD drills is micro-fractures that occur when machining the Ti plate of the stack. Tool wear increases the instability and the operation temperature when machining the Ti plate. This results in high drilling forces, large hole diameter errors, high surface roughness, wider CFRP exit thermal damage, and taller exit Ti burrs.

Retrospective Analysis of Re-operated Patients after Chronic Subdural Hematoma Surgery

  • Jeong, Chul-An;Kim, Tae-Wan;Park, Kwan-Ho;Chi, Moon-Pyo;Kim, Jae-O;Kim, Jung-Chul
    • Journal of Korean Neurosurgical Society
    • /
    • v.38 no.2
    • /
    • pp.116-120
    • /
    • 2005
  • Objective : The aim of this study is to analyze the clinical symptoms, radiological changes, interval from first operation to symptom recurrence and to propose the proper treatment method for re-operated patients following chronic subdural hematoma surgery. Methods : Between January 1992 and April 2003, 18 of 138patients of chronic subdural hematoma repeatedly underwent surgical treatment. The symptoms, mental status by Bender grade, radiological hematoma size and midline shifting, interval from symptom onset to diagnosis, surgical method and prognosis by Glasgow outcome scale[GOS] between the first attack and the recurrence were compared. Results : The symptoms at the time of recurrence were nearly the same as with the first attack, but two patients[2/18, 11.1%] showed a more declined mentality. In addition, the recurred hematoma sizes were the same or large than those previously found. Many patients were recurred within two weeks[13/18, 72.2%]. Most patients were operated on using the previous burr hole, with the exception of one patient who recurred at a different site. All patients had a good prognosis more than GOS 4 [GOS 4:4, GOS 5:12], but two died due to extracranial complication and infection. Conclusion : These results suggest that the early diagnosis and treatment are important, mostly recurred same symptoms within two weeks. Re-operation using the previous burr hole site is a good method.