• 산업기술연구
• /
• 제3권
• /
• pp.65-68
• /
• 1983

There are chief concerns every ceramist must keep in mind when firing a single kiln : Being able to read and control the kilns temperature as the firing progresses and as the kiln cools after firing. Controlling the atmosphere of the kiln in order to create desired glaze and clay body effects. Getting the most efficient use from the fuel-the most heat possible from the least fuel possible. The more exactly, author can control these factors with some result.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.261-267
• /
• 2008

One of the most important issues in fence-type PDP is low luminance and luminous efficiency. To improve luminance and luminous efficiency, new sustain electrode structure which contains long discharge gap is necessary. However, it causes rise of firing voltage. In this paper, a new fence electrode structure is proposed in order to solve these problems. To drop the firing voltage, tow hump shaped electrodes is added on the main discharge electrode, and distance between two humps is controlled. The experimental results show that the test panel with the narrow horizontal gap(40um) between two humps shows low firing voltage by 17V compared with 80um gap in spit of similar luminance and luminous efficiency.

• 한국세라믹학회지
• /
• 제52권2호
• /
• pp.159-164
• /
• 2015

We manufacture artificial lightweight aggregates (ALWAs) using bottom-ash as the primary raw material. We coat the ALWA surfaces with low-melting point materials in order to enable them to bloat, which is essential to reduce the bulk density of the aggregate. Then, we sinter the prepared aggregates at 1000, 1100, and $1200^{\circ}C$ using either the direct or two-step firing schedules. Finally, we evaluate the properties of the fired samples through analyzing their bulk density, water absorption, and microstructure. The surface-modified samples result in a reduction of their bulk density by $0.3{\sim}0.4g/cm^3$ regardless of the firing method used. Based on these results, we conclude that this approach could provide a viable method for the mass-production of ALWAs from industrial waste such as bottom-ash.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.69-72
• /
• 2015

Computational fluid dynamics (CFD) modeling of large-scale coal-fired boilers requires a complicated set of flow, heat transfer and combustion process models based on different degrees of simplification. This study investigates the influence of coal devolatilization, char conversion and turbulent gas reaction models in CFD for a tangential-firing boiler at 500MWe capacity. Devolatilization model is found out not significant on the overall results, when the kinetic rates and the composition of volatiles were varied. In contrast, the turbulence mixing rate influenced significantly on the gas reaction rates, temperature, and heat transfer rate on the wall. The influence of char conversion by the unreacted core shrinking model (UCSM) and the 1st-order global rate model was not significant, but the unburned carbon concentration was predicted in details by the UCSM. Overall, the effects of the selected models were found similar with previous study for a wall-firing boiler.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.166-172
• /
• 1997

In order to find out relationship between hit probability and gun firing of a moving tank, a turret and flexible gun system model has been developed using the recursive flexible multibody dynamics. For a firing simulation model, nodal coordinates for a finite element model of a flexible gun have been employed to include traverse loads to the gun tube due to moving bullet and ballistic pressure. Modal coordinates are also used to represent the motion induced gun vibration before a firing occurs. An efficient switching technique from modal equations to nodal equations has been introduced for an entire gun firing simulation with rotating turret.

• 융합정보논문지
• /
• 제10권2호
• /
• pp.82-88
• /
• 2020

본 연구는 화공용 열교환기에서 법랑코팅 적용을 위한 고온의 소성 공정조건 최적화에 대한 기초자료를 얻고자 하는데 그 목적이 있다. Shell & Tube 형태인 열교환기에 법랑코팅 적용을 위해 소성온도를 순차적으로 높이는 방안에 대해 검토하였다. 소성로 내부에서 열교환기의 온도분포에 대해 CFD 상용 프로그램으로 수치계산하여 구한 온도를 하중조건으로 열응력 해석을 수행하는 연성 해석(FSI) 방식을 이용하여 열교환기의 구조 안전성에 미치는 영향을 확인하였다. 수치해석 및 실험결과 상온의 열교환기를 바로 860℃도의 소성로에 넣으면 열교환기의 국부적 온도차로 인한 구조 안전성에 문제가 발생하므로 온도차를 줄이기 위한 예열 과정이 필요하다. 소성공정 단계가 적은 Case2와 같이 1단계 예열온도 445℃, 2단계 소성온도 860℃가 가장 적합한 것으로 판단된다.

• 한국음향학회지
• /
• 제32권4호
• /
• pp.329-334
• /
• 2013

자동차 엔진을 포함한 구동계 및 흡배기계 소음의 특징은 차수 스펙트럼(order spectrum) 분석으로 파악할 수 있다. 기존의 선행 연구에서는 엔진의 1차 및 2차 점화주파수(firing frequency)와 관련된 차수성분이 차실내부 소음에 주요한 영향을 미치는 것으로 알려져 있다. 본 연구에서는 차수스펙트럼의 변환에 따른 차실내부 소음의 음질(쾌적감) 차이를 파악하고자 한다. 이를 위하여 6실린더 및 4실린더 가솔린 엔진을 가진 승용차의 차실 내부 소음을 측정하고, 이 소음에 적응형 디지털 필터(adaptive digital filter)를 적용하여 차수레벨을 가감하는 방법으로 수정한다. 쌍비교법을 이용한 청음실험을 통하여 원음 및 편집음의 음질 정도를 평가하고, 음질 향상을 위한 차수스펙트럼 변화 방향을 제시한다. 결과적으로 반-차수(half-order) 성분의 차수레벨 감소가 차실내부 소음의 쾌적감 향상에 영향을 주는 반면, 점화차수 레벨의 감소가 항상 음질에 긍정적인 영향을 주는 것은 아님을 파악하였다.

• Journal of Oral Medicine and Pain
• /
• 제24권4호
• /
• pp.421-437
• /
• 1999

This study was performed to investigate the electromyographic(EMG) activity, firing time and sequence of the mandibular elevator muscle on gum chewing. For this study, 28 patients with temporomandibular disorders(TMD), especially internal derangement of TM joint, and 16 dental students without any signs and symptoms in the masticatory system were selected as the patients group and as the normal group, respectively. The patients group was composed of 14 right and 14 left side affected patients. For recording of EMG activity(${\mu}V$) of the anterior temporalis(TA) and the masseter muscle(MM), and measuring of firing time(millisecond) from the start of mandibular opening movement to the firing of the muscles, BioEMG, BioEGN, and Combo program integrated in the Biopak system(Bioresearch Inc., Milwaukee, USA) were used. Gum chewing stroke was performed in both right and left side for several times, and the first and the second chewing strokes were analysed and compared with regard to EMG activity, firing time, firing sequence, correlation between EMG activity and firing time. The data obtained were analysed by SPSS windows program and the results of this study were as follows : 1. In the patients group, chewing on the affected side showed higher EMG activities in the masseter of the side than those of the contralateral side, but chewing on the unaffected side showed higher EMG activity in the masseter and in the anterior temporalis of the side than those of the contralateral side. 2. There were no difference of firing time between both sides on chewing on the affected side, but firing time in the chewing side were earlier than that of contralateral side on chewing on the unaffected side in patients group. 3. In the normal group, EMG activities in the masseter and in the anterior temporalis in the chewing side were always higher than those of the contralateral side, and there were no difference of firing time between the two sides. 4. In general, firing sequence of four muscles of both sides were ipsilateral TA, ipsilateral MM, contralateral TA, and contralateral MM in earlier order of time in both groups. Correlation coefficients between EMG activity and firing time were negative value, and more significant correlation were appeared in the normal group than in the patients group.

• 대한치과재료학회지
• /
• 제42권2호
• /
• pp.95-106
• /
• 2015

Hardening mechanism associated with post-firing heat treatment of softening heat treated and then firing simulated Pd-Ag-Au alloy for bonding porcelain was examined by observing the change in hardness, crystal structure and microstructure. By post-firing heat treatment of as-cast, solution treated and pre-firing heat treated specimens at $650^{\circ}C$ after casting, the hardness value increased within 10 minutes. Then, hardness consistently increased until 30 minutes, and gap of hardness value among the specimens was reduced. The increase in hardness after post-firing heat treatment was caused by grain interior precipitation in the matrix. The softening heat treatment did not affect the increase in hardness by post-firing heat treatment. The precipitated phase from the parent Pd-Ag-Au-rich ${\alpha}$ phase with face-centered cubic structure by post-firing heat treatment was $Pd_3$(Sn, In) phase with face-centered tetragonal structure, which has lattice parameters of $a_{200}=4.0907{\AA}$, $c_{002}=3.745{\AA}$. From above results, appropriate post-firing heat treatment in order to support the hardness of Pd-Ag-Au metal substructure was expected to bring positive effects to durability of the prosthesis.

• 한국국방경영분석학회지
• /
• 제36권2호
• /
• pp.11-24
• /
• 2010

네트워크 중심전(NCW) 및 효과중심작전(EBO)으로 대표되는 현대 및 미래전에서 포병의 신속하고 정확한 정밀타격능력은 전쟁 승패의 중요한 요인으로 작용될 것이다. 본 연구는 대화력전 및 화력지원간 실제 운용되는 환경 중 갱도포병과 같이 타격제한시간이 있는 포병 표적처리에 관한 연구로 여러 가지 제한사항들을 모형 화하여 표적할당 및 사격순서를 동시에 결정하는 문제이다. 본 연구에서는 시간제약이 있는 포병 표적처리문제에서 사격 제한시간을 만족하면서, 총 사격시간을 최소화하는 수리모형과 유전자 알고리즘을 제시하였다. 소형 문제를 이용한 축소실험으로 본 연구에서 제안하는 수리모형과 유전자 알고리즘의 타당성을 입증하였으며, 대형 문제를 이용한 확대실험에서 유전자 알고리즘으로 근사 최적해를 산출하였다.