• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.12-20
• /
• 2007

The aiming ability is a key to improve the accuracy performance of the gun pointing system in the ground military vehicle. This paper describes the new detection method of chatter vibration using disturbance acceleration in the pointing structure. In order to analysis the vibration trends of the pointing system occurred while the vehicle driving, acceleration data obtained from vehicle was processed by using data processing algorithm with moving average and Hilbert transform. The specific mode constants of acceleration were obtained from various disturbances. Vehicle velocity, road condition and property of pointing structure were considered as factors which make the change of vibration trend in vehicle dynamics. Finally, back propagation neural networks have been applied to the pattern recognition of the classification of vibration signal in various driving conditions. Results of signal processing were compared with other condition result and analysed.

• Transactions on Electrical and Electronic Materials
• /
• 제2권3호
• /
• pp.7-11
• /
• 2001

Utility boiler operators seeking to gain the greatest economic advantage from their units are faced with three challenges, namely the obligatory light-up fuel costs, the additional expense of supplementary fuel firing should they wish to use a cheaper fuel that may be beyond the original burner manufacturer’s stability and combustion performance assurances and the immediate environmental impact of both. The novel use of plasma arc technology can provide a solution to these challenges. This paper introduces the work being undertaken through a joint collaboration between the EU, Kazahkstan and Russia in order to develop a tried and tested engineering methodology and a mathematical based application and sensitivity analysis approach for the design and optimisation stage of these plasma devices that, as a consequence, their assist in their universal introduction.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2984-2988
• /
• 2008

Numerical analyses are carried out in order to understand complex thermal characteristics of a gas turbine combustor liner such as combustion gas temperatures, wall temperatures and heat transfer distributions. As results, The maximum internal and external heat transfer is $2218W/m^2K$ and $2358W/m^2K$, respectively. The combustion gas temperatures range is 673K to 1760K. A range of temperature on TBC is 676K to 1382K. Lastly, temperature range on outer surface of combustion liner cooled by compressed air is 676K to 1188K.

• 한국음향학회지
• /
• 제16권1호
• /
• pp.54-59
• /
• 1997

자동차의 진동은 공기저항력, 엔진가진력, 타이어의 불균형 질량 그리고 타이어 유니포머티에 의한 가진력의 결과이다. 특히 조향계의 셰이크와 시미현상은 차체 진동, 타이어 불균형 진동 그리고 타이어 유니포머티와 관련이 깊다. 본 연구에서는 타이어의 불균형 질량과 타이어 유니포머티에 의한 시미현상을 연구하였다.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.779-784
• /
• 1996

The spinel/cubic stabilized zirconia composites were fabricated via, The reaction sintering of monoclinic zirco-nia(baddeleyite) added with MgAl powder. During heating Mg and Al were oxidizedfirst and subsequently the oxides formed spinel (MgAl2O4) and finally remained MgO stabilized the zirconia, Because the oxides formed during the oxidation process would have very fine grain size (order of submicron) mainly due to the effects of attrition milling the reaction sintering was more effective in densification and improvement of strength and fracture toughness than conventional sintering with direct addition of MgO. The sintering behavior phase transformation during firing and mechanical properties of sintered body were investigated with emphasis on the relations between spinel formation due to MgAl addition and sintering and mechanical properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1689-1691
• /
• 2003

In this paper, we investigated the relationships between the position of bus electrode and discharge characteristics in ac PDP with VGA resolution. The double bus electrode lines at the edge of ITO electrode are placed in order to lower the firing voltage. As a result, static margin and dynamic margin for the PDP with double bus electrodes was about 10V lower than conventional type.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.39-43
• /
• 1997

Effects of B$_2$O$_3$ addition in the Li$_2$O-MgO-MgF$_2$-SiO$_2$g1ass system were investigated in order to make glass-ceramics for low temperature firing substrate. Base glass was made by melting at 145$0^{\circ}C$ . This glass was analyzed by THA and DTA to settle nucleation and crystallization temperature. After crystallization. crystal phase and microstructure were absorvated by XRD and SEM. Glass powders were made by water swelling method. Average particle size was 5.44${\mu}{\textrm}{m}$

• 한국군사과학기술학회지
• /
• 제16권6호
• /
• pp.752-761
• /
• 2013

A new gun fire control system has been developed for the Korean next generation frigate class. The engineering requirement was far more tightened than the PKG-A class for the firing range availability and gun control function since 5 inch gun is adopted for the new ship. We mention about the principal technologies required to build a generic gun fire control system and proposed methods for the new gun fire control system. The new system has been designed based on the proposed methods in order to satisfy the requirement and functionality has been proved to be acceptable through the sea trial by Korean navy.

• 한국추진공학회지
• /
• 제25권1호
• /
• pp.50-57
• /
• 2021

한국형발사체에 사용되는 액체로켓엔진과 같이 극저온 추진제를 사용하는 엔진은 시험 전 시험설비 배관 및 엔진 냉각이 필수적으로 선행되어 엔진 입구 온도를 만족시켜야 한다. 본 논문에서는 한국형발사체 7톤급 액체로켓엔진의 시험 전 냉각 단계에서 소모되는 액체산소의 양을 확인하였고, 시험설비 배관 및 엔진 냉각특성을 평가하였다.

• 한국분무공학회지
• /
• 제29권1호
• /
• pp.23-31
• /
• 2024

This study conducted a 3D thermo-acoustic analysis based on the helmholtz solver to analyze the major resonance modes causing combustion instability in a single-can combustor. The experimental investigations were carried out on a test rig designed by the Korea Institute of Machinery & Materials (KIMM) under various conditions of hydrogen co-firing and fuel staging. Through these experiments, two primary unstable frequencies were identified. To determine the resonance modes of these frequencies, a 3D thermo-acoustic analysis was conducted using temperature information from the test rig. The results confirmed that the unstable frequencies observed in the experiments were all longitudinal modes. Additionally, the mode shapes identified in the analysis facilitated a simplification of the exit geometry for the low-order network model, confirming that this did not significantly affect the fundamental resonance modes.