• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.161-169
• /
• 1987

An experimental study of the characteristics and the behavior of flames, and the aerodynamic flow pattern was carried out in the present work on a down draft kiln for gas firing. The aim of this work is to establish a behavior of flames and to know the extent to which the flow pattern is affected by the height of baffle plate. The measurements of temperature, concentrations of fuelgas, and kiln pressure were conducted at different temperature in kiln, and at different height of baffle plate. From the obtained results, it was found that the characteristics of thestagnation zone are greatly affected when changing over the height of baffle plate, and the best condition of that was 115m/m.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2002.05a
• /
• pp.923-929
• /
• 2002

We discuss scheduling analysis for a discrete event system with time windows of which firing or holding time delays are subject to random variation within some finite range. To do this, we propose a modified p-lime Petri net, named p+-time Petri net. We develop a condition for which a synchronized transition does not have a dead token, that is, the firing epochs do not violate the time window constraints. We propose a method of computing the feasible range of the token sojourn time at each place based on a time difference graph. We also discuss an application for analyzing wafer residency times within the process chambers for a dual-armed cluster tool for chemical vapor deposition.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.1-5
• /
• 2000

Cathodoluminescence(CL) properties of ZnO:Zn green phosphor were investigated. ZnO:Zn phosphor was synthesized by varying reducing agents and firing temperatures. ZnS, charcoal and 5% H2 gas mixed with 95% N2 gas(5H2-95N2) were used as the reducing agent and atmosphere. The highest CL intensity of ZnO:Zn phosphor was observed under the condition of 5H2-95N2 atmosphere and firing temperature of 90$0^{\circ}C$ for 1h. Charocal and ZnO as reducing agents in the syntehsis of ZnO:Zn phosphor exhibited about 60% and 40%, respectively, of the CL intensity obtained with 5H2-95N2 atmosphere.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.79-82
• /
• 2011

An afterburning device was developed to safely treat unburnt gases of fuel-rich condition discharged by a gas generator. Hot-firing tests for a subscale gas generator were carried out to investigate operation and safety of the afterburning device. When supplying additional liquid oxygen, the length of the afterburning flame was significantly reduced.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.282-285
• /
• 2012

Lead-free (Bi0.5Na0.41K0.09)TiO3 (BNKT) multilayer ceramic actuators were prepared using tape-casting and screen-printing techniques. Co-firing behavior of BNKT/AgPd laminates was examined as a function of sintering temperature. It was found that co-firing induced bending and electrical properties were very sensitive to sintering condition. By optimizing sintering conditions, lead-free electrostrictive multilayer actuators with normalized strain Smax/Emax of 266 pm/V have been successfully fabricated, which is promising for lead-free actuator applications.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.272-274
• /
• 2008

A development of hydrazine decomposition catalyst for monopropellant thruster has been performed by Korea Aerospace Research Institute(KARI). The goal of this development is to product a catalyst showing the equivalent performance with space-proven catalysts. Catalyst production and physical/chemical analysis were conducted by Chonnam National University and the analysis result was compared with the result of other catalysts and our own specification. Using the developed prototype catalyst, short firing test was performed in a reactor to verify basic performance of catalyst. After the successful reactor test, hot firing tests were carried out in atmospheric and vacuum condition using 5N thruster to verify durability and safety of catalyst. In this paper, the catalyst development status will be presented.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.117-127
• /
• 1992

In this work, the possibility to diagnose valve lashes of an automotive diesel engine via cylinder head vibration/noise analysis is studied. First of all the measurement signals and conditions are selected after considering which signals and conditions are most suitable to diagonse valve lashes. Both accelerometer and microphone are used to measure cylinder head accelerations and acoustic pressure due to valve impact on cylinder head. The signals are measured in both cranking and engine firing conditions. Finally, it was found that acceleration signal obtained in engine operating condition is the most reliable signal to diagnose the valve lash condition. The valve closing angle and the peak acceleration due to valve close are chosen to analyze the valve lash condition. The measured cylinder head acceleration signals are statistically tested to derive information which are useful to judge the valve lash. In conclusion, it was found that the developed technique can be one of feasible methods to diagnose the valve conditions while the engine is in operation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1534-1536
• /
• 2007

ZnS-based orange-emitting phosphors were synthesized by two-step firing process: above $1000^{\circ}C$ to obtain hexagonal phase, and at $750^{\circ}C$ for cubic phase. The effect of heat treatment condition on the optical properties was investigated to fine an optimum condition for high-performance ZnS:Mn,Cu,Cl phosphor.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.13-30
• /
• 2011

This study compared Pottery, Hwaecheongware, Buncheongware and Whiteware pieces excavated in Hakbong-ri of Chungnam analytically by observing their refined structures and estimating their firing temperature. As a result, base soil components of the specimens were mostly similar to those of typical Buncheongware, but the content of the fluxing agent was rather high, and it seemed that the Whiteware had been made with fairly different components from those of other sherds. Although the glaze showed less difference than base soil in general, the content of the glaze changed according to the decorating methods of Buncheongware. Based on the SEM-EDS analysis, it was found that the base soil components of the ceramics seemingly rather different were actually different and the analysis on the fine crystals of the base soil, the anorthite in the glaze and crystals in the ironing part, and the components and contents of white earth showed there were some noticeable points in the process of making each of the sherds. In the refiring experiment to estimate the firing temperature, mostly similar results were gained as $1150^{\circ}C$ to $1200^{\circ}C$ for pottery, $1100^{\circ}C$ to $1150^{\circ}C$ for Hwaecheongware, and $1100^{\circ}C$ to $1200^{\circ}C$ for iron-brown Buncheongware however, the results imply good quality Whiteware was burnt at above $1300^{\circ}C$ while bad quality Whiteware was burnt at a temperature far lower than that. Thus, there was clear difference between Whiteware sherds and other kinds of sherds.

• 한국문화재보존과학회:학술대회논문집
• /
• 2003.09a
• /
• pp.24-27
• /
• 2003