• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.935-941
• /
• 1992

The LAS system with good thermal properties has a narrow range of firing and sintering temperature near the melting point. So it is difficult to sinter LAS to dense sintered body. In this study, the petalite (Li2O.Al2O3.8SiO2) with good thermal properties, was taken as a base composition, and zironia was added in this composition to broaden the firing range, increase the mechanical strength, and control the thermal expansion. The thermal and mechanical properties were investigated. The results are as follows; 1. Zirconia phase was formed in LAS matrix and apparent porosity was decreased from 0.9% to 0.5%, and the mechanical strength was kincreased from 112 MPa to 190 MPa, by the densification of body. 2. The composition Li2O.Al2O3.8SiO2 has a negative thermal expansion, but the thermal expansion was changed from negative to positive with the densification and the increase of amount of synthesized zircon phase which had positive thermal expansion. The coefficient of thermal expansion, with the increase of the amount of additives, was low as -0.74~9.06$\times$10-7/$^{\circ}C$ in 20~$600^{\circ}C$, and 7.95~20.13$\times$10-7/$^{\circ}C$ in 20~80$0^{\circ}C$. 3. The mechanical strength of LZ15 (added with ZrO2.SiO2 15 wt%) composition thermal-shocked was stable in the temperature range of 0~$600^{\circ}C$, but rapidly decreased due to the increase of thermal expansion above $600^{\circ}C$.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.428-431
• /
• 2008

Korea Aerospace Research Institute(KARI) is achieving the Korea Space Launch Vehicle(KSLV) program according to National Space Technology Development Program. KSLV-I will be composed to liquid propellant(first stage) and solid propellant(second stage) propulsion system. The propulsion system of KSLV-I second stage is solid kick motor with high expansion ratio and its starting altitude is 300km high. In order to verify the performance of upper stage propulsion system designed to operate in the upper atmosphere, test facility which can simulate high altitude is needed. High Altitude Simulation Test Facility is composed to Thrust Measurement System, Control & Measurement system, Diffuser, SKID for cooling water supply to diffuser, CCTV, fire protection system and so on. This paper introduces TMS adapted to High Altitude Simulation Test for KSLV-I Kick Motor Development and results of hot firing test for its performance verification.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1098-1103
• /
• 2014

This study deals with the development of an electrofusion welding machine that is capable of joining plastic pipes using a recently developed electrofusion fitting. This fitting has built-in conductive plastics that are used to weld the joint together as a heating element. In order to explain the mechanism of the new machine, 1) the resistance characteristics of the heating element were explained, 2) the method of electric welding that uses the electrofusion fitting was described, and 3) the method of power supply based on controlling the firing angle was explained. A control system for an intelligent electrofusion welding machine was proposed. This system has the ability to recognize the diameter of an electrofusion fitting using a lookup-table based on the difference of resistance curves according to fitting types, and it is able to weld the fittings regardless of the ambient temperature. A new algorithm was developed to control the power of electric welding through the recognition of feature points from the resistance curve of the heating element. In order to evaluate the performance of the developed welding machine, tests involving the welding of 16 mm- and 20 mm-type fittings were carried out. Examining the welding results, we concluded that the proposed welding machine will offer high productivity and reliability in the field of electrofusion welding.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권3호
• /
• pp.156-160
• /
• 2006

In whole world consciousness of environment maintenance have increased very quickly for the end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem and root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe and Ne:Ar mixed gas lamp improve firing voltage of Xe gas lamp. Purpose of this study is to understand ideal mixing-ratio of Ne:Xe and Ne:Ar gas by electron temperature and electron density for mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by single-Langmuir probe. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe and Ne:Ar.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.91-95
• /
• 2006

In whole world consciousness of environment maintenance have increased very quickly for the end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mechanism is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by Langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2424-2426
• /
• 2005

In whole world consciousness of environment maintenance have increased very quickly for he end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe and Ne:Ar mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe and Ne:Ar plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe and Ne:Ar.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.91-95
• /
• 2006

In whole world consciousness of environment maintenance have increased very quickly for the end of the 20th century. To use and disuse toxic substances have been controled at the field of industry. Also the field of lighting source belong to environmental control. And in the future the control will be strong. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem. In radiational mechanism of fluorescence lamp mercury is the worst environmental problem root. In the mercury free lighting source system the Xe gas lamp is one type. And the Ne:Xe mixing gas lamp improvements firing voltage of Xe gas lamp. Purpose and subject of this study are understand, efficiency, ideal of Ne:Xe plasma which mercury free lamp. Before ICP was designed, basic parameters of plasma, which are electron temperature and electron density, were measured and calculated by langmuir probe data. Property of electron temperature and electron density were confirmed by changing ratio of Ne:Xe.

• 한국조명전기설비학회지:조명전기설비
• /
• 제10권5호
• /
• pp.101-107
• /
• 1996

본 연구에서는 대규모 공장과 같은 수변전계통의 전압개선을 위한 전압보상설비의 특성을 해석하는 기법을 제시했다. 보상설비는 전력전자 기술을 이용한 SVC에 대해서 전기적인 과도특성 해석에 가장 정확안 S/W중 하나인 EMTP를 이용하여 TCR전류, 전압 및 점호특성 등을 분석하였다. 이러한 해석기법은 전압개선의 필요성이 높은 제철공장과 같은 대규모 공장의 수변전계통에서 외란에 대한 SVC의 전압개선 특성효과를 분석하는데 유용함을 보였다.

• 한국추진공학회지
• /
• 제2권3호
• /
• pp.80-89
• /
• 1998

다목적 실용위성의 궤도전이 및 위성체 자세제어를 위한 추진시스템의 설계요소에는 구조적 안전성, 우주환경에서의 열 제어를 위한 회로 및 구성하드웨어 설계, 연료계통 맥압강하를 위한 장치설계 및 추력기 배기가스 영향을 고려한 형상설계 등이 있으며, 설계검증을 위해 부분해석이 수행된다. 또한 발사환경과 우주 궤도환경에서의 추진시스템 성능평가를 위한 열 제어계 기능시험, 압력인증시험, 청정도시험 및 내부/외부 누설시험이 수행된다. 본 논문에서는 추진시스템 설계 및 조립공정에 대해 기술하였고, 시험분석을 통해 시스템의 설계 및 조립공정상의 신뢰성을 검증 분석하였다.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.17-24
• /
• 2011

간헐 회전식 약실 계가 화력 대 무장 공간의 비율 관점에서 볼 때 중구경 자동포에 크게 유익하다고 보고되었다. 그러나 약실계의 핵심 부품인 평행 인덱스가 인덱스 터릿에 설치되는 캠종동절의 상대적으로 낮은 횡 강성으로 인하여 비틀림 방향으로 유연해지는 경향이 있으며, 이는 결국 터릿과 약실 사이의 연결 축이 상당한 크기의 비틀림 잔류 진동에 노출되어 탄 장전과 발사 시에 심각한 비정렬 문제를 야기시킬 수 있다. 이러한 맥락에서 본 논문에서는 상기 진동을 억제하는 ER 유체 작동기와 그에 적합한 반능동 제어 알고리듬을 제안하게 되었으며, 전체 계의 수학적 모델링과 컴퓨터 시뮬레이션을 통하여 그 성능이 만족스러움을 입증하였다.