• 한국화재소방학회논문지
• /
• 제29권2호
• /
• pp.1-7
• /
• 2015

전기화재의 주요 원인 중 하나인 트래킹은 서서히 진전하는 특징을 가지기 때문에 진전단계를 분석함으로서 화재가능성을 예측할 수 있다. 본 논문은 부하가 연결된 모의 전기설비에서 트래킹에 의한 전기화재 가능성을 예측하고자 시도하였다. 부하는 무유도 저항을 사용하였고, 트래킹은 모의 전기설비의 일부인 비닐캡타이어 타원형코드에 전해액을 적하하여 발생시켰다. 트래킹에 의한 전기화재 가능성을 예측하기 위해 모의 전기설비의 전체 전류파형을 검출하였다. 전류파형으로부터 트래킹 진전을 분석하기 위해 시간-에너지 변환과 확률분포를 이용하였고, 이를 신경망에 입력함으로써 전기설비 내에서 전기화재의 발생가능성을 4단계로 예측할 수 있게 하였다.

• 한국지열·수열에너지학회논문집
• /
• 제20권1호
• /
• pp.8-15
• /
• 2024

This study aims to investigate the possibility of expanding the support program for green remodeling of fire stations and analyze the standard design guidelines. Green remodeling is essential for reducing greenhouse gas emissions and promoting green buildings, but currently, it is only conducted for buildings with limited purposes. In this study, we conduct green remodeling for fire stations with severe aging to demonstrate energy performance improvement and investigate the potential for expanding the support program to other types of aging buildings. The research methodology includes analysis of previous studies, preliminary investigation and alternative setting, energy analysis, calculation of construction costs, evaluation of the possibility of introducing support programs, and examine of the fire station standard design guidelines. The research results confirm that green remodeling can reduce energy consumption in fire stations and present the possibility of including fire stations as targets in the support program for green remodeling of public buildings.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2007년도 추계학술논문발표회 논문집
• /
• pp.323-327
• /
• 2007

• 대한안전경영과학회지
• /
• 제22권2호
• /
• pp.39-46
• /
• 2020

This paper recognizes the risk of ignition of air fryer (machine that can cook fried dishes with hot air without oil) that is far exceeding the sales rate of microwave ovens, which is necessary to modern household kitchen, and identifies fire risk through the operation principle of the process of heat transfer, and the main structure of the machine. The fire test that we conducted is to observe the risk of ignition of the machine due to the damage to the safety system and the possibility of igniting oil paper along with food, to experiment with the possibility of ignition due to blockage of the exhaust due to obstacles, and accumulation of oil stains on the hot wire, and to present the method of fire control and devise countermeasures.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.751-756
• /
• 2023

In this study, We investigated a fire case and performed an experiment to prevent fire from sparks that is generated during grinding operation. Before conduct the test, confirmed that the generating mechanism of fire-flakes in working grinder and the fire experiment was conducted using commonly tools, flammable materials in industrial field. in result, It could be measured scattering distance, temperature, ignition possibility by type of combustible materials. Based on the results of this study, We are expected to be used as basic data for fire prevention in grinding Industry.

• 한국안전학회지
• /
• 제31권1호
• /
• pp.61-65
• /
• 2016

In this study, we considered the ignition possibility for the shredded thermoplastic elastomer at the fire ground loaded the waste TPE. The average moisture content of the TPE sample was almost 0.33 wt.% at $110^{\circ}C$ and the range of ignition point was $461.9{\sim}491.9^{\circ}C$ approximately. In addition, we analyzed the change of weight and calorie the TPE sample according to temperature variations using the TG-DTA analyzer. As a result, the weight loss occurred twice in $250{\sim}420^{\circ}C$ and $420{\sim}473^{\circ}C$, and we found the second weight loss temperature range was the ignition point of TPE. Also, we conducted the spontaneous ignition tests of TPE for the wet and dry samples and we confirmed that the possibility of spontaneous ignition of TPE was very low. The elapsed time and humidity had little influence on the spontaneous ignition of TPE in this experimental conditions. In conclusion, the spontaneous of the shredded waste TPE in this study.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.1-7
• /
• 2015

This paper is aimed to analyze the electrical and thermal signal such as ignition possibility, ignition time, thermal characteristics and arc fault power that are associated with electrical fire in case of the occurrence of series arc at IV wiring used for interior wiring at commercial power source. In order to analyze the signal, series arc was induced by generating the constant vibration through vibrating device in the one phase (R phase) and ignition possibility was analyzed along the condition of current value by adding cotton material to the contact point of wiring. The ignition time is shortened as the electric current value increased, burning time is not associated with current value and the temperature rose up to $740^{\circ}C$ though it was not ignited. It was checked out that the temperature was the energy source enough that can generate the fire related with insulation aging of wiring and the inflammable. The possibility of electrical fire by series arc was shown as more than 12% at 5A, more than 42% at 20A and arc showed 27W at 5A, 180W at 20A. It was confirmed that the possibility of electrical fire exists at the condition as above and the circuit breaker did not operate. This data can be used as the reference value for the investigation of electrical fire or development of the circuit breaker.

• 한국화재조사학회지
• /
• 제4권1호
• /
• pp.42-46
• /
• 2004

• 한국안전학회지
• /
• 제7권4호
• /
• pp.105-114
• /
• 1992

This paper presents an study on the knowledge based system for diagnosing the fire causes using the Fuzzy Possibility Measure( FPM ) about the electric-fire ignition. The Ignition values needed for causes diagnosis is computed as FPM for electric-fire ignition based on the internal scale technique that assigns numerically the characteristic difference of facts to the-tin-ear scale. For the convinience of inference, ignition sources are classified into seven types : short, ground fault, leakge of electricity, overcurrent, cord junction overheating, bad Insulation and spark. The system for causes diagnosis of electric-fire is composed of Knowledge Acquisition System, Inference Engine and Man-Machine Interface, The diagnosis system is wrritten in an artificial intelligence langusge “PROLOG” which uses depth-first search and backward chaining schemes in reasoning process.

• 한국화재소방학회논문지
• /
• 제20권1호
• /
• pp.43-49
• /
• 2006

본 논문은 조명설비 중 220V/100W 백열전구의 온도특성과 화재분석에 관하여 연구하였다. 백열전구의 발열에 의한 발화가능성을 실험한 결과 정상상태에서는 최고 $161.9^{\circ}C$로 측정되었다. 밀폐된 공간에서 축 열이 되면 약 $538.1^{\circ}C$까지 상승하는 것으로 나타났다. 유리구를 파손하였을 경우 필라멘트는 공기 중에서 용단되었다. 외부 열에 의한 경우 전구 내부의 가스가 약한 부분으로 분출되었다. 따라서 백열전구는 산소의 공급이 원활하면서 폐쇄된 공간에서 화재의 가능성이 높으며, 가연성 물질 등이 주변에 있다면 화재 가능성이 매우 높은 것으로 나타났다. 백열전구의 외형변화, 재료특성의 변화 등을 통해 화재원인을 규명하는 중요한 자료로 이용될 것이 기대된다.